[Sunhelp] how do I determine memory configuration

[Walter Krumshyn]

There is a utility called memconf I found a while ago which produces the
following output:

# ./memconf
hostname: hostname
Sun 16-slot Sun Enterprise E6500
                                                     Intrlv.  Intrlv.
Brd   Bank   MB   DIMMs   Status   Condition  Speed   Factor   With
---  -----  ----  -----  -------  ----------  -----  -------  -------
 0     0    1024  8x128   Active      OK       60ns    8-way     A
 0     1    1024  8x128   Active      OK       60ns    8-way     A
 2     0    1024  8x128   Active      OK       60ns    8-way     A
 2     1    1024  8x128   Active      OK       60ns    8-way     A
 4     0    1024  8x128   Active      OK       60ns    8-way     A
 4     1    1024  8x128   Active      OK       60ns    8-way     A
 6     0    1024  8x128   Active      OK       60ns    8-way     A
 6     1    1024  8x128   Active      OK       60ns    2-way     B
 8     0    1024  8x128   Active      OK       60ns    8-way     A
 8     1    1024  8x128   Active      OK       60ns    2-way     B
Bank 0 uses sockets J3100-J3800, Bank 1 uses sockets J3101-J3801
total memory = 10240MB


Walter



Eddie Watkins wrote:
> 
> Hi
> 
> Can anyone tell me of a o/s command that will show me what the memory
> configuration is.
> 
> e.g.  I have an E3000 with 768MB of RAM, how do I find out how that is made
> up, i.e. 3x256mb or (2x256mb and 2x128mb) without opening up the server.
> 
> Thanks
> 
> Eddie Watkins
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp