[rescue] Tape Drive woes

[Brock Johnson]

Brian Deloria wrote:
> So I finally got the "repaired" tape drive back and decided to swap it out
> to make sure it was working.  It didn't work, and when I plugged in the old
> tape drive low and behold that doesn't play nicely.  Here's the dump from
> messages.  I suspect that they "swapped" the tape drives and gave me a LVD
> unit instead of a HVD one:
> 
> 
> Dec 22 10:31:30 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2 (glm2):
> 
> Dec 22 10:31:30 cad00 Resetting scsi bus, got incorrect phase from (3,0)
> 
> Dec 22 10:31:30 cad00 genunix: [ID 408822 kern.info] NOTICE: glm2: fault
> detected in device; service still available
> 
> Dec 22 10:31:30 cad00 genunix: [ID 611667 kern.info] NOTICE: glm2: Resetting
> scsi bus, got incorrect phase from (3,0)
> 
> Dec 22 10:31:30 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2 (glm2):
> 
> Dec 22 10:31:30 cad00 Target 3 reducing sync. transfer rate
> 
> Dec 22 10:31:30 cad00 glm: [ID 923092 kern.warning] WARNING: ID[
> SUNWpd.glm.sync_wide_backoff.6014]
> 
> Dec 22 10:31:30 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2 (glm2):
> 
> Dec 22 10:31:30 cad00 got SCSI bus reset
> 
> Dec 22 10:31:30 cad00 genunix: [ID 408822 kern.info] NOTICE: glm2: fault
> detected in device; service still available
> 
> Dec 22 10:31:30 cad00 genunix: [ID 611667 kern.info] NOTICE: glm2: got SCSI
> bus reset
> 
> Dec 22 10:31:33 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2 (glm2):
> 
> Dec 22 10:31:33 cad00 Resetting scsi bus, got incorrect phase from (3,0)
> 
> Dec 22 10:31:33 cad00 genunix: [ID 408822 kern.info] NOTICE: glm2: fault
> detected in device; service still available
> 
> Dec 22 10:31:33 cad00 genunix: [ID 611667 kern.info] NOTICE: glm2: Resetting
> scsi bus, got incorrect phase from (3,0)
> 
> Dec 22 10:31:33 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2 (glm2):
> 
> Dec 22 10:31:33 cad00 Target 3 disabled wide SCSI mode
> 
> Dec 22 10:31:33 cad00 glm: [ID 681974 kern.warning] WARNING: ID[
> SUNWpd.glm.sync_wide_backoff.6012]
> 
> Dec 22 10:31:33 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2 (glm2):
> 
> Dec 22 10:31:33 cad00 SCSI bus reset recursion
> 
> Dec 22 10:31:33 cad00 genunix: [ID 408789 kern.warning] WARNING: glm2: fault
> detected in device; service unavailable
> 
> Dec 22 10:31:33 cad00 genunix: [ID 451854 kern.warning] WARNING: glm2: SCSI
> bus reset recursion
> 
> Dec 22 10:31:45 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 10:31:45 cad00 transport rejected
> 
> Dec 22 10:31:45 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 10:31:45 cad00 transport rejected
> 
> Dec 22 10:32:01 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 10:32:01 cad00 transport rejected
> 
> Dec 22 10:32:01 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 10:32:01 cad00 transport rejected
> 
> Dec 22 10:33:10 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 10:33:10 cad00 transport rejected
> 
> Dec 22 10:33:10 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 10:33:10 cad00 transport rejected
> 
> Dec 22 11:02:31 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 11:02:31 cad00 transport rejected
> 
> Dec 22 11:02:31 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 11:02:31 cad00 transport rejected
> 
> Dec 22 11:08:48 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 11:08:48 cad00 transport rejected
> 
> Dec 22 11:08:48 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 11:08:48 cad00 transport rejected
> 
> Dec 22 11:24:17 cad00 unix: [ID 882636 kern.warning] WARNING: interrupt
> level 4 not serviced
> 
> Dec 22 11:24:17 cad00 last message repeated 19 times
> 
> Dec 22 11:24:17 cad00 pcipsy: [ID 104478 kern.warning] WARNING: pcipsy0: ino
> 0x10 has been blocked
> 
> Dec 22 11:24:17 cad00 pcipsy: [ID 486037 kern.warning] WARNING: glm2:
> interrupt #0 has been blocked
> 
> Dec 22 11:24:17 cad00 unix: [ID 882636 kern.warning] WARNING: interrupt
> level 4 not serviced
> 
> Dec 22 11:27:40 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 11:27:40 cad00 transport rejected
> 
> Dec 22 11:27:40 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 11:27:40 cad00 transport rejected
> 
> Dec 22 13:09:33 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 13:09:33 cad00 transport rejected
> 
> Dec 22 13:09:33 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 13:09:33 cad00 transport rejected
> 
> Dec 22 13:09:46 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 13:09:46 cad00 transport rejected
> 
> Dec 22 13:09:46 cad00 scsi: [ID 107833 kern.warning] WARNING: /pci at 1f,
> 4000/scsi at 2/st at 3,0 (st17):
> 
> Dec 22 13:09:46 cad00 transport rejected
> 
> 
> 
> Thanks,
> 
> 
> 
> Brian
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue

Looks like the controller board on the drive is shot. What kind of a 
tape drive is it? There anything else on the bus with it?

Did you plug it into an HVD controller? If it's an SE/LVD and you did, 
you probably would've seen smoke coming off the drive.