[rescue] (no subject)

[Kabagambe Kenneth]

Hi.
I am experiencing a problem booting up a Suun Ultra UltraSPARC-IIi box running Solaris.
When booting, just after displaying the boot message(banner), I get the following error repeated many times scrolling down the screen.
INITSH: /dev/console^M: cannot open INITSH: /dev/console^M: cannot open INITSH: /dev/console^M: cannot open

To me,this looks like whatever reference was meant to point to /dev/console is now pointing to /dev/console^M.
I dont know how to mount the disk itself.
probe-scsi-all shows no devices which to me initially implied that the disks were not recognised.
However show-devs has a reference to an ide disk, '/pci at 1f,0/pci at 1,1/ide at 3/disk'.I assume this is a reference to an ide disk.
Looking at the properties of this device :
dev /pci at 1f,0/pci at 1,1/ide at 3/disk
.properties
  devicetype ide 
  name       ide
  device-id  00000646
  vendor-id  0001095
ls
  f00811c4 cdrom
  f0080b18 ide  
printenv boot-device
  disk:a disk:b net
devalias disk
  /pci at 1f,0/pci at 1,1/ide at 3/disk at 0,0

When I run a test-all, the test hangs at 'Internal loopback test'
When I run watch-net-all, the Internal loopback test passes but Transciever check hangs the system.

Do you have any idea how to solve this? Or the real cause of the system?


-- 
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org 
This allows you to send and receive SMS through your mailbox.


Powered by Outblaze