[rescue] Tektronix printer

[Sandwich Maker]

" From: Mike Parson <mparson at bl.org>
" 
" On Thu, Apr 15, 2004 at 05:30:36PM -0400, Kevin Loch wrote:
" >
" > 2. Place a drop of wd-40 on the inside and outside edges
" > of the clutch housing, *without getting oil anywhere else*.
" > On the outside edge apply oil to between the clutch housing
" > and the disc at the end.
" 
" Probably better to use another type of oil.  WD-40 is a penetrating
" oil, not really best for lube-type applications, more for, 'this nut is
" rusted onto this bolt' applications.

that's right; the 'wd' stands for 'water displacer'.

i'd nominate 3-in-1 oil for this.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh at an.bradford.ma.us                       and think what none thought