[rescue] Sun Monitor on an SGI

[Jochen Kunz]

On 2003.02.11 08:43 Bjorn Ramqvist wrote:

> SGI 20D11 + Sun = not working
You can make this work. Get a 13W3 => 4 BNC cable for the Sun, a 13W3 =>
3 BNC for the SGI monitor and BNC - BNC couplers. Connect the R to R and
B to B BNC plugs of the 13W3 cables. Use a BNC T plug from your old
10Base2 cabling to connect G to G. Connect the sync wire from the Sun
via a 470 Ohm resistor to the open connector of the BNC T plug. Result:
A Sun video to SGI Monitor 13W3 - 13W3 cable with sync on green adapter.

--



tsch|_,
         Jochen

Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/