[rescue] Xyplex MaxServer 1600

[Steve Sandau]

Well, let's see...

1M x 8 means 9 chips? (I'm not sure.) They all have tin contacts (as
opposed to gold, right?). Four of the 9-chip SIMMS are 70 ns. This set
says "10275-0005 1MB, 1X9-70, 30 PIN" on the back.

Are we getting anywhere? ;)

Eugene Kushnirskiy wrote:
> 
> Steve,
> 
> Thanks for a quick response. Do you by any chance have part numbers for
> those chips? According to the manual, the unit will accept only specific
> types of memory, which is 30-pin 80ns (or faster) 1M X 8 SIMMs with tin
> contacts. Please let me know if this is what you have (or the part number if
> you have it), because I do not want to waste your time by asking you to send
> me the chips I would not be able to use anyway.
> 
> Regards,
> 
> Eugene Kushnirskiy
> 
> ----- Original Message -----
> From: "Steve Sandau" <ssandau at bath.tmac.com>
> To: <rescue at sunhelp.org>
> Sent: Saturday, October 27, 2001 9:57 PM
> Subject: Re: [rescue] Xyplex MaxServer 1600
> 
> > I have some 3-chip (qty: two) and some 9-chip (qty: six) 30 pin SIMMS
> > available for the cost of postage.
> >
> > Eugene Kushnirskiy wrote:
> > >
> > > Hello everyone,
> > >
> > > I was reading archived list messages on sunhelp.org, trying to find a
> > > solution to my Xyplex MaxServer 1600 problems. Apparently a minimum of
> 4MB
> > > RAM is required to  load and run the software. I only have 3MB in the
> box.
> > > Some kind person named G W Adkins has posted a message to the list
> saying
> > > that he has a lot of these memory chips to give away (see message
> below):
> > >
> > > ---------------------
> > > G W Adkins rescue at sunhelp.org
> > > Thu, 23 Aug 2001 13:34:32 -0400
> > > Previous message: [rescue] Xyplex 1600 woes
> > > Next message: [rescue] Xyplex 1600 woes
> > > Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
> > >
> > > > On Wed, Aug 22, 2001 at 10:01:41PM -0400, Mike Nicewonger wrote:
> > > > > If you guys need ram lemme know.
> > > >
> > > > it seems that way unless linc has anything.  nothing i have that
> > > > is 30-pin is partity, besides the single 4MB stick i have.  can
> > > > i put that thing in there and expect it to work?
> > > >
> > > > -brian
> > > If you guys need 1 meg 30's, I have a metric Buttload of Siemens 60ns
> true
> > > parity (9 chip) 1 meg 30's to give away in sets of 4.
> > >
> > > George
> > > ---------------------
> > >
> > > Can George of anyone else that has these SIMMs available to give away or
> for
> > > sale at a reasonable price, respond to me?
> > >
> > > Regards,
> > >
> > > Eugene Kushnirskiy
> > >
> > > _______________________________________________
> > > rescue maillist  -  rescue at sunhelp.org
> > > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> > --
> > Steve Sandau
> > ssandau at bath.tmac.com
> > _______________________________________________
> > rescue maillist  -  rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> >
> 
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue

-- 
Steve Sandau
ssandau at bath.tmac.com