[rescue] SSH between PowerBook OS X .1.2 and Solaris

[Ken Hansen]

OK, here is a failure from SSH with the -v option enabled:

[localhost:~] ken% ssh ken at basenji.com
Secure connection to basenji.com refused.
[localhost:~] ken% ssh -v ken at basenji.com
OpenSSH_2.9p2, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
debug1: Reading configuration data /etc/ssh_config
debug1: Seeding random number generator
debug1: Rhosts Authentication disabled, originating port will not be 
trusted.
debug1: restore_uid
debug1: ssh_connect: getuid 501 geteuid 501 anon 1
debug1: Trying again...
debug1: Trying again...
debug1: Trying again...
Secure connection to basenji.com refused.
[localhost:~] ken%

And here is the same command run on Linux:

[ken at double ken]$ ssh -v ken at basenji.com
SSH Version OpenSSH_2.1.1, protocol versions 1.5/2.0.
Compiled with SSL (0x0090581f).
debug: Reading configuration data /etc/ssh/ssh_config
debug: Applying options for *
debug: Seeding random number generator
debug: ssh_connect: getuid 500 geteuid 0 anon 0
debug: Connecting to basenji.com [66.42.61.9] port 22.
debug: Allocated local port 1023.
debug: Connection established.
debug: Remote protocol version 1.99, remote software version 
OpenSSH_3.0.2p1
Enabling compatibility mode for protocol 2.0
debug: Local version string SSH-2.0-OpenSSH_2.1.1
debug: Seeding random number generator
debug: send KEXINIT
debug: done
debug: wait KEXINIT
debug: got kexinit: diffie-hellman-group-exchange-
sha1,diffie-hellman-group1-sha1
debug: got kexinit: ssh-rsa,ssh-dss
debug: got kexinit: aes128-cbc,3des-cbc,blowfish-
cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,
rijndael256-cbc,rijndael-cbc at lysator.liu.se
debug: got kexinit: aes128-cbc,3des-cbc,blowfish-
cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,
rijndael256-cbc,rijndael-cbc at lysator.liu.se
debug: got kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-
ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug: got kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-
ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug: got kexinit: none,zlib
debug: got kexinit: none,zlib
debug: got kexinit:
debug: got kexinit:
debug: first kex follow: 0
debug: reserved: 0
debug: done
debug: kex: server->client 3des-cbc hmac-sha1 none
debug: kex: client->server 3des-cbc hmac-sha1 none
debug: Sending SSH2_MSG_KEXDH_INIT.
debug: bits set: 495/1024
debug: Wait SSH2_MSG_KEXDH_REPLY.
debug: Got SSH2_MSG_KEXDH_REPLY.
debug: keytype ssh-dss
debug: keytype ssh-dss
debug: keytype ssh-dss
debug: Host 'basenji.com' is known and matches the DSA host key.
debug: bits set: 503/1024
debug: len 55 datafellows 0
debug: dsa_verify: signature correct
debug: Wait SSH2_MSG_NEWKEYS.
debug: GOT SSH2_MSG_NEWKEYS.
debug: send SSH2_MSG_NEWKEYS.
debug: done: send SSH2_MSG_NEWKEYS.
debug: done: KEX2.
debug: send SSH2_MSG_SERVICE_REQUEST
debug: service_accept: ssh-userauth
debug: got SSH2_MSG_SERVICE_ACCEPT
debug: authentications that can continue: 
publickey,password,keyboard-interactive
debug: key does not exist: /home/ken/.ssh/id_dsa
ken at basenji.com's password:
debug: ssh-userauth2 successfull
debug: no set_nonblock for tty fd 4
debug: no set_nonblock for tty fd 5
debug: no set_nonblock for tty fd 6
debug: channel 0: new [client-session]
debug: send channel open 0
debug: Entering interactive session.
debug: callback start
debug: client_init id 0 arg 0
debug: channel request 0: shell
debug: client_set_session_ident: id 0
debug: callback done
debug: channel 0: open confirm rwindow 0 rmax 16384
debug: channel 0: rcvd adjust 32768
Last login: Wed Dec 26 18:18:15 2001 from pool-151-204-74
Sun Microsystems Inc.   SunOS 5.7       Generic October 1998

(I'm in!)

Thoughts?

Ken

n2vip at yahoo.com
n2vip at mac.com
Looking for something, try browsing 
http://www.basenji.com/~ken/forsale.html


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com