[SunRescue] Re: RH 6.2 & Ethernet Transceiver

TomYarrishtom at yarrish.com TomYarrishtom at yarrish.com
Tue Sep 5 08:25:00 CDT 2000


Well, as I think I said, the interface comes up, and the light on my switch
for that connection comes up as well.  So it looks like it should work.  I
do need to double check the interface configuration, but I did plug in the
numbers during the install.  I even did a cat /proc/interrupts and I see the
transceiver there.  Anyway, I know when I get to compiling the kernel, I'll
have the network modules to load, so I wasn't sure if there was one in
particular I should choose.

Thanks,
Tom
-----Original Message-----
From: Harry Regan <harry.regan at usa.net>
To: rescue at sunhelp.org <rescue at sunhelp.org>
Date: Tuesday, September 05, 2000 6:54 AM
Subject: [SunRescue] Re: RH 6.2 & Ethernet Transceiver


>
>Hmmm.  It should just plain work...  I have an IPC running RH 6.2 and using
an
>AVI (el cheapo) transceiver-- it installed and worked straight out of the
box.
> I'd suspect either your network configuration or the transceiver itself.
>Note that in the standard RH install, it plugs in a value for the gateway
>address (and the DNS server address), so if you didn't change the value to
the
>real gateway, you ain't routing packets...
>
>___________________________________________________________________
>---- Harry J. Regan
>---- Phone: 202.310.2719
>---- FAX: 212.202.3923
>---- harry.regan at usa.net
>---- hregan at lepus.com
>
>
>____________________________________________________________________
>Get free email and a permanent address at http://www.amexmail.com/?A=1
>_______________________________________________
>Rescue maillist  -  Rescue at sunhelp.org
>http://www.sunhelp.org/mailman/listinfo/rescue
>






More information about the rescue mailing list