[SunRescue] Sparcserver 1000 and disk trays...

[Mike Nicewonger]

In the front of that machine, behind the face cover and next to the open
drive bays, there is mounting space for up to 4 3 1/2" hard disks, so I
would bet they are connected to that bus.

As for the other busses I dunno.

Mike N
----- Original Message -----
From: Patrick Giagnocavo <a222 at redrose.net>
To: <rescue at sunhelp.org>
Sent: Wednesday, May 17, 2000 3:47 PM
Subject: Re: [SunRescue] Sparcserver 1000 and disk trays...


> > The actual error messages might be instructive...
> >
> > DG
>
> OK, here is some more information:
>
> I have two drive trays.  I only connected one, after placing ONE drive in
> the tray (all others were removed).
>
> probe-scsi-all gives:
>
> /io-unit at f,e1200000/sbi at 0,0/dma at 0,81000/esp at 0,80000
>
> /io-unit at f,e0200000/sbi at 0,0/dma at 1,81000/esp at 1,80000
> Target 2
>  Unit 0    Disk    CONNER  CP30548   <bunch of serial numbers>
>
> /io-unit at f,e0200000/sbi at 0,0/dma at 0,81000/esp at 0,80000
> Target 0
>   Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
> Target 1
>   Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
> Target 2
>   Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
> Target 3
>   Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
> Target 5
>   Unit 0   Removable Tape   EXABYTE EXB-8505SMBANSH20793
06644396
> Target 6
>   Unit 0   Removable Read Only Device SONY CDU 561  SUNMSCD1.9K
>
> (I had to type this in, since I am using a Wyse 60 terminal on the Sun.)
>
> I have been trying to understand this output.
>
> Do I have 3 different SCSI interfaces on this system?  Of just two, but
one
> can handle 14 devices instead of 7?  Or what?
>
> Cordially
>
> Patrick Giagnocavo
> a222 at redrose.net
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>