[SunRescue] Sparcserver 1000 and disk trays...

[Patrick Giagnocavo]

> The actual error messages might be instructive...
> 
> DG

OK, here is some more information:

I have two drive trays.  I only connected one, after placing ONE drive in
the tray (all others were removed).

probe-scsi-all gives:

/io-unit at f,e1200000/sbi at 0,0/dma at 0,81000/esp at 0,80000

/io-unit at f,e0200000/sbi at 0,0/dma at 1,81000/esp at 1,80000
Target 2
 Unit 0    Disk    CONNER  CP30548   <bunch of serial numbers>

/io-unit at f,e0200000/sbi at 0,0/dma at 0,81000/esp at 0,80000
Target 0
  Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
Target 1
  Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
Target 2
  Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
Target 3
  Unit 0   Disk    CONNER  CP30540    <bunch of serial numbers>
Target 5
  Unit 0   Removable Tape   EXABYTE EXB-8505SMBANSH20793           06644396
Target 6
  Unit 0   Removable Read Only Device SONY CDU 561  SUNMSCD1.9K

(I had to type this in, since I am using a Wyse 60 terminal on the Sun.)

I have been trying to understand this output.

Do I have 3 different SCSI interfaces on this system?  Of just two, but one
can handle 14 devices instead of 7?  Or what?

Cordially

Patrick Giagnocavo
a222 at redrose.net