[SunRescue] 3/80 and Mono Video

[William Barnett-Lewis]

Figures ;'p 

If I read the back panel correctly, the part number is 365-1168-02.

I'll try to see if my Mac's NEC will sync to it with the adapter I've got.
If not, well, so much for Open Windows anytime soon. Thanks for the
information.

William

Message: 8
Date: Sat, 23 Dec 2000 13:38:20 -0800 (PST)
From: James Lockwood <james at quickdog.com>
To: rescue at sunhelp.org
Subject: Re: [SunRescue] 3/80 and Mono Video
Reply-To: rescue at sunhelp.org

On Sat, 23 Dec 2000, William Barnett-Lewis wrote:

> I have an mg4 frame buffer (with both connectors and the right back plate)
> with a Sun 20M1 monitor connected to the 13W3 port, but the two don't seem
> to want to sync correctly. I get two or three very fuzzy images overlapping
> each other. I didn't see anything relating to this in the FAQ's. Is this
> 
> a) common and fixable? Is there a simple setting that will fix this?
> or
> b) do I go looking for a different frame buffer?
> or
> c) is the monitor somehow wrong?

The sync rates are incompatible.  My guess is that the framebuffer is
putting out 1152x900 @ 61.8KHz/66Hz, and the monitor won't sync below
76Hz.  What's the full monitor part number?

-James