# -*- text -*-
#
#  $Id: 63f44b1c1bedf70e6fc7eb6e4120a18084408a41 $

#
#	A module to cache attributes.  The idea is that you can look
#	up information in a database, and then cache it.  Repeated
#	requests for the same information will then have the cached
#	values added to the request.
#
#	The module can cache a fixed set of attributes per key.
#	It can be listed in "authorize", "post-auth", "pre-proxy"
#	and "post-proxy".
#
#	If you want different things cached for authorize and post-auth,
#	you will need to define two instances of the "cache" module.
#
#	The module returns "ok" if it found or created a cache entry.
#	The module returns "updated" if it merged a cached entry.
#	The module returns "noop" if it did nothing.
#	The module returns "fail" on error.
#
cache {
	#  The backend datastore used to store the cache entries.
	#  Current datastores are
	#    rlm_cache_rbtree    - An in memory, non persistent rbtree based datastore.
	#                          Useful for caching data locally.
	#    rlm_cache_memcached - A non persistent "webscale" distributed datastore.
	#                          Useful if the cached data need to be shared between
	#                          a cluster of RADIUS servers.
#	driver = "rlm_cache_rbtree"

	#
	#  Some drivers accept specific options, to set them a
	#  config section with the the name as the driver should be added
	#  to the cache instance.
	#
	#  Driver specific options are:
	#
#	memcached {
#		# Memcached configuration options, as documented here:
#		#    http://docs.libmemcached.org/libmemcached_configuration.html#memcached
#		options = "--SERVER=localhost"
#
#		pool {
#			start = ${thread[pool].start_servers}
#			min = ${thread[pool].min_spare_servers}
#			max = ${thread[pool].max_servers}
#			spare = ${thread[pool].max_spare_servers}
#			uses = 0
#			lifetime = 0
#			idle_timeout = 60
#		}
#	}

	#  The key used to index the cache.  It is dynamically expanded
	#  at run time.
	key = "%{User-Name}"

	#  The TTL of cache entries, in seconds.  Entries older than this
	#  will be expired.
	#
	#  This value should be between 10 and 86400.
	ttl = 10

	#  If yes the following attributes will be added to the request:
	#      * &request:Cache-Entry-Hits - The number of times this entry
	#				     has been retrieved.
	#
	#  Note: Not supported by the rlm_cache_memcached module.
	add_stats = no

	#
	#  The list of attributes to cache for a particular key.
	#
	#  Each key gets the same set of cached attributes. The attributes
	#  are dynamically expanded at run time.
	#
	#  The semantics of this construct are identical to an unlang
	#  update block, except the left hand side of the expression
	#  represents the cache entry. see man unlang for more information
	#  on update blocks.
	#
	#  Note: Only request, reply, control and session-state lists
	#  are available in cache entries. Attempting to store attributes
	#  in other lists will raise an error during config validation.
	#
	update {
		# <list>:<attribute> <op> <value>

		# Cache all instances of Reply-Message in the reply list
		&reply:Reply-Message += &reply:Reply-Message

		# Add our own to show when the cache was last updated
		&reply:Reply-Message += "Cache last updated at %t"

		&reply:Class := "%{randstr:ssssssssssssssssssssssssssssssss}"
	}

	#  This module supports a number of runtime configuration parameters
	#  represented by attributes in the &control: list.
	#
	#  &control:Cache-TTL - Sets the TTL of an entry to be created, or
	#  modifies the TTL of an existing entry.
	#    - Setting a Cache-TTL of > 0 means set the TTL of the entry to
	#      the new value (and reset the expiry timer).
	#    - Setting a Cache-TTL of < 0 means expire the existing entry
	#      (without merging) and create a new one with TTL set to
	#      value * -1.
	#    - Setting a Cache-TTL of 0 means expire the existing entry
	#      (without merging) and don't create a new one.
	#
	#  &control:Cache-Status-Only - If present and set to 'yes' will
	#  prevent a new entry from being created, and existing entries from
	#  being merged.  It will also alter the module's return codes.
	#    - The module will return "ok" if a cache entry was found.
	#    - The module will return "notfound" if no cache entry was found.
	#
	#  &control:Cache-Read-Only - If present and set to 'yes' will
	#  prevent a new entry from being created, but will allow existing
	#  entries to be merged.  It will also alter the module's return codes.
	#    - The module will return "updated" if a cache entry was found.
	#    - The module will return "notfound" if no cache was found.
	#
	#  &control:Cache-Merge - If present and set to 'yes' will merge new
	#  cache entries into the current request. Useful if results
	#  of execs or expansions are stored directly in the cache.
	#
	#  All runtime configuration attributes will be removed from the
	#  &control: list after the cache module is called.

}
