MYSQL-TEST-RUN(1)

NAME
mysql-test-run.pl - run MySQL test suite

SYNOPSIS

mysql-test-run.pl [options]

DESCRIPTION

The mysql-test-run.pl Perl script is the main application used to run the MySQL test suite. It invokes mysqltest to run individual test cases.

Invoke mysql-test-run.pl in the mysql-test directory like this:

    shell> mysql-test-run.pl [options] [test_name] ...

Each test_name argument names a test case. The test case file that corresponds to the test name is t/test_name.test.

For each test_name argument, mysql-test-run.pl runs the named test case. With no test_name arguments, mysql-test-run.pl runs all .test files in the t subdirectory.

If no suffix is given for the test name, a suffix of .test is assumed. Any leading path name is ignored. These commands are equivalent:

    shell> mysql-test-run.pl mytest
    shell> mysql-test-run.pl mytest.test
    shell> mysql-test-run.pl t/mytest.test

A suite name can be given as part of the test name. That is, the syntax for naming a test is:

    [suite_name.]test_name[.suffix]

If a suite name is given, mysql-test-run.pl looks in that suite for the test. The test file corresponding to a test named suite_name.test_name is found in suite/suite_name/t/test_name.test. There is also an implicit suite name main for the tests in the top t directory. With no suite name, mysql-test-run.pl looks in the default list of suites for a match and runs the test in any suites where it finds the test. Suppose that the default suite list is main, binlog, rpl, and that a test mytest.test exists in the main and rpl suites. With an argument of mytest or mytest.test, mysql-test-run.pl will run mytest.test from the main and rpl suites.

To run a family of test cases for which the names share a common prefix, use the --do-test=prefix option. For example, --do-test=rpl runs the replication tests (test cases that have names beginning with rpl). --skip-test has the opposite effect of skipping test cases for which the names share a common prefix.

The argument for the --do-test and --skip-test options also allows more flexible specification of which tests to perform or skip. If the argument contains a pattern metacharacter other than a lone period, it is interpreted as a Perl regular expression and applies to test names that match the pattern. If the argument contains a lone period or does not contain any pattern metacharacters, it is interpreted the same way as previously and matches test names that begin with the argument value. For example, --do-test=testa matches tests that begin with testa, --do-test=main.testa matches tests in the main test suite that begin with testa, and --do-test=main.*testa matches test names that contain main followed by testa with anything in between. In the latter case, the pattern match is not anchored to the beginning of the test name, so it also matches names such as xmainytesta.

From MySQL 5.7 it is possible to put a list of test names in a file and have mysql-test-run.pl run those tests, using the option --do-test-list=file. The tests should be listed one per line in the file, using the fully qualified name suite.test. A space may be used in place of the period. A line beginning with # indicates a comment and is ignored.

To perform setup prior to running tests, mysql-test-run.pl needs to invoke mysqld with the --bootstrap and --skip-grant-tables options. If MySQL was built with the compiler flag -DDISABLE_GRANT_OPTIONS, then --bootstrap, --skip-grant-tables, and --init-file will be disabled. To handle this, set the MYSQLD_BOOTSTRAP environment variable to the full path name of a server that has all options enabled. mysql-test-run.pl will use that server to perform setup; it is not used to run the tests.

The init_file test will fail if --init-file is disabled. This is an expected failure in this case.

To run mysql-test-run.pl on Windows, you'll need either Cygwin or ActiveState Perl to run it. You may also need to install the modules required by the script. To run the test script, change location into the mysql-test directory, set the MTR_VS_CONFIG environment variable to the configuration you selected earlier (or use the --vs-config option), and invoke mysql-test-run.pl. For example (using Cygwin and the bash shell):

    shell> cd mysql-test
    shell> export MTR_VS_CONFIG=debug
    shell> ./mysqltest-run.pl --force --timer
    shell> ./mysqltest-run.pl --force --timer --ps-protocol

mysql-test-run.pl uses several environment variables. Some of them are listed in the following table. Some of these are set from the outside and used by mysql-test-run.pl, others are set by mysql-test-run.pl instead, and may be referred to in tests.
Variable | Description
MTR_MEM | If set to anything, will run tests with files in "memory" using tmpfs or ramdisk. Not available on Windows. Same as --mem option
MTR_PARALLEL | If set, defines number of parallel threads executing tests. Same as --parallel option
MTR_BUILD_THREAD | If set, defines which port number range is used for the server
MTR_PORT_BASE | If set, defines which port number range is used for the server
MTR_NAME_TIMEOUT | Setting of a timeout in minutes or seconds, corresponding to command line option --name-timeout. Avaliable timeout names are TESTCASE, SUITE (both in minutes) and START, SHUTDOWN (both in seconds).
MYSQL_CONFIG_EDITOR | Path name to mysql_config_editor binary. Supported as of MySQL 5.6.6.
MYSQL_TEST | Path name to mysqltest binary
MYSQL_TEST_LOGIN_FILE | Path name to login file used by mysql_config_editor. If not set, the default is $HOME/.mylogin.cnf, or %APPDATA%\MySQL\.mylogin.cnf on Windows. Supported as of MySQL 5.6.6.
MYSQLD_BOOTSTRAP | Full path name to mysqld that has all options enabled
MYSQLD_BOOTSTRAP_CMD | Full command line used for initial database setup for this test batch
MYSQLD | Full path to server executable used in tests. Supported as of MySQL 5.5.17.
MYSQLD_CMD | Command line for starting server as used in tests, with the minimum set of required arguments. Supported as of MySQL 5.5.17.
MYSQLTEST_VARDIR | Path name to the var directory that is used for logs, temporary files, and so forth
MYSQL_TEST_DIR | Full path to the mysql-test directory where tests are being run from
MYSQL_TMP_DIR | Path to temp directory used for temporary files during tests

The variable MTR_PORT_BASE is a more logical replacement for the original variable MTR_BUILD_THREAD. It gives the actual port number directly (will be rounded down to a multiple of 10). If you use MTR_BUILD_THREAD, the port number is found by multiplying this by 10 and adding 10000.

Tests sometimes rely on certain environment variables being defined. For example, certain tests assume that MYSQL_TEST is defined so that mysqltest can invoke itself with exec $MYSQL_TEST.

Other tests may refer to the last three variables listed in the preceding table, to locate files to read or write. For example, tests that need to create files will typically put them in $MYSQL_TMP_DIR/file_name.

The variable $MYSQLD_CMD will include any server options added with the --mysqld option to mysql-test-run.pl, but will not include server options added specifically for the currently running test.

mysql-test-run.pl supports the options in the following list. An argument of -- tells mysql-test-run.pl not to process any following arguments as options.

    • --help, -h

    Display a help message and exit.

    • --big-test

    Allow tests marked as "big" to run. Tests can be thus marked by including the line --source include/big_test.inc, and they will only be run if this option is given, or if the environment variable BIG_TEST is set to 1.

    This is typically done for tests that take very long to run, or that use very much resources, so that they are not suitable for running as part of a normal test suite run.

    • --boot-dbx

    Run the mysqld server used for bootstrapping the database through the dbx debugger. This option is available from MySQL 5.5.17.

    • --boot-ddd

    Run the mysqld server used for bootstrapping the database through the ddd debugger. This option is available from MySQL 5.5.17.

    • --boot-gdb

    Run the mysqld server used for bootstrapping the database through the gdb debugger. This option is available from MySQL 5.5.17.

    • --build-thread=number

    Specify a number to calculate port numbers from. The formula is 10 * build_thread + 10000. Instead of a number, it can be set to auto, which is also the default value, in which case mysql-test-run.pl will allocate a number unique to this host.

    The value (number or auto) can also be set with the MTR_BUILD_THREAD environment variable.

    This option is kept for backward compatibility. The more logical --port-base is recommended instead.

    • --callgrind

    Instructs valgrind to use callgrind.

    • --check-testcases

    Check test cases for side effects. This is done by checking system state before and after each test case; if there is any difference, a warning to that effect will be written, but the test case will not be marked as failed because of it. This check is enabled by default.

    • --clean-vardir

    Clean up the var directory with logs and test results etc. after the test run, but only if there were no test failures. This option only has effect if also running with option --mem. The intent is to alleviate the problem of using up memory for test results, in cases where many different test runs are being done on the same host.

    • --client-bindir=path

    The path to the directory where client binaries are located.

    • --client-dbx

    Start mysqltest in the dbx debugger. Support for dbx is available from MySQL 5.5.12.

    • --client-ddd

    Start mysqltest in the ddd debugger.

    • --client-debugger=debugger

    Start mysqltest in the named debugger.

    • --client-gdb

    Start mysqltest in the gdb debugger.

    • --client-libdir=path

    The path to the directory where client libraries are located.

    • --combination=value

    Extra option to pass to mysqld. The value should consist of a single mysqld option including dashes. This option is similar to --mysqld but has a different effect. mysql-test-run.pl executes multiple test runs, using the options for each instance of --combination in successive runs. If --combination is given only once, it has no effect. For test runs specific to a given test suite, an alternative to the use of --combination is to create a combinations file in the suite directory. The file should contain a section of options for each test run. See Section 4.9, “Passing Options from mysql-test-run.pl to mysqld or mysqltest”.

    • --comment=str

    Write str to the output within lines filled with #, as a form of banner.

    • --compress

    Compress all information sent between the client and the server if both support compression.

    • --cursor-protocol

    Pass the --cursor-protocol option to mysqltest (implies --ps-protocol).

    • --dbx

    Start mysqld in the dbx debugger. Support for dbx is available from MySQL 5.5.12.

    • --ddd

    Start mysqld in the ddd debugger.

    • --debug

    Dump trace output for all clients and servers.

    • --debugger=debugger

    Start mysqld using the named debugger.

    • --debug-common

    This option works similar to --debug but turns on debug only for the debug macro keywords query, info, error, enter, exit which are considered the most commonly used.

    • --debug-server

    Runs mysqld.debug (if available) instead of mysqld as server. If it does find mysqld.debug, it will search for plugin libraries in a subdirectory debug under the directory where it's normally located. This option does not turn on trace output and is independent of the debug option.

    • --debug-sync-timeout=N

    Controls whether the Debug Sync facility for testing and debugging is enabled. The option value is a timeout in seconds. The default value is 300. A value of 0 disables Debug Sync. The value of this option also becomes the default timeout for individual synchronization points.

    mysql-test-run.pl passes --loose-debug-sync-timeout=N to mysqld. The --loose prefix is used so that mysqld does not fail if Debug Sync is not compiled in.

    For information about using the Debug Sync facility for testing, see Section 4.14, “Thread Synchronization in Test Cases”.

    • --default-myisam

    Use MyISAM as default engine for all except InnoDB-specific tests. This option is on by default in MySQL 5.5 and 5.6 but it off by default from MySQL 5.7. See also --nodefault-myisam.

    • --defaults-file=file_name

    Use the named file as fixed config file template for all tests.

    • --defaults_extra_file=file_name

    Add setting from the named file to all generated configs.

    • --do-test=prefix

    Run all test cases having a name that begins with the given prefix value. This option provides a convenient way to run a family of similarly named tests.

    The argument for the --do-test option also allows more flexible specification of which tests to perform. If the argument contains a pattern metacharacter other than a lone period, it is interpreted as a Perl regular expression and applies to test names that match the pattern. If the argument contains a lone period or does not contain any pattern metacharacters, it is interpreted the same way as previously and matches test names that begin with the argument value. For example, --do-test=testa matches tests that begin with testa, --do-test=main.testa matches tests in the main test suite that begin with testa, and --do-test=main.*testa matches test names that contain main followed by testa with anything in between. In the latter case, the pattern match is not anchored to the beginning of the test name, so it also matches names such as xmainytestz.

    • --do-testlist=file

    Run all tests listed in the file file. In this file, tests should be listed one per line in the form suite.test or alternatively, with a space instead of the period. A line beginning with # will be ignored and can be used for comments.

    The --do-test-list option is available from MySQL 5.7.

    • --embedded-server

    Use a version of mysqltest built with the embedded server.

    • --enable-disabled

    Ignore any disabled.def file, and run also tests marked as disbaled. Success or failure of those tests will be reported the same way as other tests.

    • --experimental=file_name

    Specify a file that contains a list of test cases that should be displayed with the [ exp-fail ] code rather than [ fail ] if they fail.

    For an example of a file that might be specified using this option, see mysql-test/collections/default.experimental.

    It is also possible to supply more than one --experimental, test cases listed in all the files will be treated as experimental.

    • --explain-protocol,

    Run EXPLAIN EXTENDED on all SELECT, INSERT, REPLACE, UPDATE and DELETE queries.

    • --extern option=value

    Use an already running server. The option/value pair is what is needed by the mysql client to connect to the server. Each --extern can only take one option/value pair as argument, so it you need more you need to repeat --extern for each of them. Example:

              ./mysql-test-run.pl --extern socket=var/tmp/mysqld.1.sock alias

    Note: If a test case has an .opt file that requires the server to be restarted with specific options, the file will not be used. The test case likely will fail as a result.

    • --fast

    Do not perform controlled shutdown when servers need to be restarted or at the end of the test run. This is equivalent to using --shutdown-timeout=0.

    • --force

    Normally, mysql-test-run.pl exits if a test case fails. --force causes execution to continue regardless of test case failure.

    • --force-restart

    Always restart the server(s) between each tast case, whether it's needed or not. Will also restart between repeated runs of the same test case. This may be useful e.g. when looking for the source of a memory leak, as there will only have been one test run before the server exits.

    • --gcov

    Run tests with the gcov test coverage tool.

    • --gdb

    Start mysqld in the gdb debugger.

    • --gprof

    Run tests with the gprof profiling tool.

    • --include-ndbcluster, --include-ndb

    Run also tests that need Cluster.

    • --json-explain-protocol,

    Run EXPLAIN FORMAT=JSON on all SELECT, INSERT, REPLACE, UPDATE and DELETE queries. The json-explain-protocol option is available from MySQL 5.6.

    • --manual-dbx

    Use a server that has already been started by the user in the dbx debugger. Support for dbx is available from MySQL 5.5.12.

    • --manual-ddd

    Use a server that has already been started by the user in the ddd debugger.

    • --manual-debug

    Use a server that has already been started by the user in a debugger.

    • --manual-gdb

    Use a server that has already been started by the user in the gdb debugger.

    • --mark-progress

    Marks progress with timing (in milliseconds) and line number in var/log/testname.progress.

    • --max-connections=num

    The maximum number of simultaneous server connections that may be used per test. If not set, the maximum is 128. Minimum allowed limit is 8, maximum is 5120. Corresponds to the same option for mysqltest.

    • --max-save-core=N

    Limit the number of core files saved, to avoid filling up disks in case of a frequently crashing server. Defaults to 5, set to 0 for no limit. May also be set with the environment variable MTR_MAX_SAVE_CORE

    • --max-save-datadir=N

    Limit the number of data directories saved after failed tests, to avoid filling up disks in case of frequent failures. Defaults to 20, set to 0 for no limit. May also be set with the environment variable MTR_MAX_SAVE_DATADIR

    • --max-test-fail=N

    Stop execution after the specified number of tests have failed, to avoid using up resources (and time) in case of massive failures. retries are noe counted, nor are failures of tests marked experimental. Defaults to 10, set to 0 for no limit. May also be set with the environment variable MTR_MAX_TEST_FAIL

    • --mem

    This option is not supported on Windows.

    Run the test suite in memory, using tmpfs or ramdisk. This can decrease test times significantly, in particular if you would otherwise be running over a remote file system. mysql-test-run.pl attempts to find a suitable location using a built-in list of standard locations for tmpfs and puts the var directory there. This option also affects placement of temporary files, which are created in var/tmp.

    The default list includes /dev/shm. You can also enable this option by setting the environment variable MTR_MEM[=dir_name]. If dir_name is given, it is added to the beginning of the list of locations to search, so it takes precedence over any built-in locations.

    Once you have run tests with --mem within a mysql-testdirectory, a soflink var will have been set up to the temporary directory, and this will be re-used the next time, until the soflink is deleted. Thus, you do not have to repeat the --mem option next time.

    • --mysqld=value

    Extra option to pass to mysqld. Only one option may be specified in value; to specify more than one, use additional --mysqld options. See Section 4.9, “Passing Options from mysql-test-run.pl to mysqld or mysqltest”.

    • --mysqld-env=variable=value

    Sets (or changes) an environment variable before starting mysqld. Varibles set in the environment from which you run mysql-test-run.pl will normally also be propagated to mysqld, but there may be cases where you want a setting just for a single run, or you may not want the setting to affect other programs. You may use additional --mysqld-env options to set more than one variable.

    • --ndb-connectstring=str

    Pass --ndb-connectstring=str to the master MySQL server. This option also prevents mysql-test-run.pl from starting a cluster. It is assumed that there is already a cluster running to which the server can connect with the given connectstring.

    • --nocheck-testcases

    Disable the check for test case side effects; see --check-testcases for a description.

    • --nodefault-myisam

    For MySQL 5.5 or 5.6, do not override the build-in default engine to use MyISAM instead for non-InnoDB tests. Since the existing collection of tests were originally adapted for MyISAM as default, many tests will fail when this option is used, because the test behaves differently or produces different output when the engine switches to InnoDB.

    From MySQL 5.7, the default engine for tests has been changed to InnoDB and this option will have no effect.

    • --noreorder

    Do not reorder tests to reduce number of restarts, but run them in exactly the order given. If a whole suite is to be run, the tests are run in alphabetic order, though similiar combinations will be grouped together. If more than one suite is listed, the tests are run one suite at a time, in the order listed.

    • --notimer

    Cause mysqltest not to generate a timing file. The effect of this is that the report from each test case does not include the timing in milliseconds as it normally does.

    • --nounit-tests

    Do not run unit tests, overriding default behaviour or setting of the MTR_UNIT_TESTS variable.

    Running of unit tests was enabled from MySQL 5.5.11.

    • --nowarnings

    Do not look for and report errors and warning in the server logs.

    • --parallel={N|auto}

    Run tests using N parallel threads. By default, 1 thread is used. Use --parallel=auto for auto-setting of N.

    • --port-base=P

    Specify base of port numbers to be used; a block of 10 will be allocated. P should be divisible by 10; if it is not, it will be rounded down. If running with more than one parallel test thread, thread 2 will use the next block of 10 and so on.

    If the port number is given as auto, which is also the default, mysql-test-run.plwill allocate a number unique to this host. The value may also be given with the environment variable MTR_PORT_BASE.

    --port-base was added in MySQL 5.1.45 as a more logical alternative to --build-thread. If both are used, --port-base takes precedence.

    • --print-testcases

    Do not run any tests, but print details about all tests, in the order they would have been run.

    • --ps-protocol

    Pass the --ps-protocol option to mysqltest.

    • --record

    Pass the --record option to mysqltest. This option requires a specific test case to be named on the command line.

    • --reorder

    Reorder tests to minimize the number of server restarts needed. This is the default behavior. There is no guarantee that a particular set of tests will always end up in the same order.

    • --repeat=N

    Run each test N number of times.

    • --report-features

    Display the output of SHOW ENGINES and SHOW VARIABLES. This can be used to verify that binaries are built with all required features.

    • --report-times

    At the end of the test run, write a summary of how much time was spent in various phases of execution. If you run with --parallel, the total will exceed the wall clock time passed, since it will be summed over all threads.

    The times reported should only be treated as approximations, and the exact points where the time is taken may also change between releases. If the test run is aborted, including if a test fails and --force is not in use, the time report will not be produced.

    The --report-times is available from MySQL 5.5.

    • --retry=N

    If a test fails, it is retried up to a maximum of N runs, but will terminate after 2 failures. Default is 3, set to 1 or 0 for no retries. This option has no effect unless --force is also used; without it, test execution will terminate after the first failure.

    The --retry and --retry-failure options do not affect how many times a test repeated with --repeat may fail in total, as each repetition is considered a new test case, which may in turn be retried if it fails.

    • --retry-failure=N

    Allow a failed and retried test to fail more than the default 2 times before giving it up. Setting it to 0 or 1 effectively turns off retries

    • --shutdown-timeout=SECONDS

    Max number of seconds to wait for servers to do controlled shutdown before killing them. Default is 10.

    • --skip-combinations

    Do not apply combinations; ignore combinations file or option.

    • --skip-ndbcluster, --skip-ndb

    Do not start NDB Cluster; skip Cluster test cases. This option only has effect if you do have NDB, if not it will have no effect as it cannot run those tests anyway.

    • --skip-ndbcluster-slave, --skip-ndb-slave

    Do not start an NDB Cluster slave.

    • --skip-rpl

    Skip replication test cases.

    • --skip-ssl

    Do not start mysqld with support for SSL connections.

    • --skip-test=regex

    Specify a regular expression to be applied to test case names. Cases with names that match the expression are skipped. tests to skip.

    The argument for the --skip-test option allows more flexible specification of which tests to skip. If the argument contains a pattern metacharacter other than a lone period, it is interpreted as a Perl regular expression and applies to test names that match the pattern. See the description of the --do-test option for details.

    • --skip-test-list=file

    Specify a file listing tests that should be skipped (disabled).

    The file has the same format as the disabled.def file listing disabled tests. With this option, disabling can be done on a case by case basis. The --skip-test-list option is supported from MySQL 5.5.

    • --skip-*

    --skip-* options not otherwise recognized by mysql-test-run.pl are passed to the master server.

    • --sleep=N

    Pass --sleep=N to mysqltest.

    • --sp-protocol

    Pass the --sp-protocol option to mysqltest.

    • --ssl

    If mysql-test-run.pl is started with the --ssl option, it sets up a secure connection for all test cases. In this case, if mysqld does not support SSL, mysql-test-run.pl exits with an error message: Couldn't find support for SSL

    • --start

    Initialize and start servers with the startup settings for the specified test case. You can use this option to start a server to which you can connect later. For example, after building a source distribution you can start a server and connect to it with the mysql client like this:

        shell> cd mysql-test
        shell> ./mysql-test-run.pl --start alias &
        shell> ../mysql -S ./var/tmp/master.sock -h localhost -u root

    If no tests are named on the command line, the server(s) will be started with settings for the first test that would have been run without the --start option.

    mysql-test-run.pl will stop once the server has been started, but will terminate if the server dies. If killed, it will also shut down the server.

    • --start-and-exit

    This is similar to --start, but mysql-test-run.pl terminates once the server has been started, leaving just the server process running.

    • --start-dirty

    This is similar to --start, but will skip the database initialization phase and assume that database files are already available. Usually this means you must have run another test first.

    • --start-from=test_name

    mysql-test-run.pl sorts the list of names of the test cases to be run, and then begins with test_name.

    • --strace-client

    Create strace output for mysqltest. Will produce default strace output as mysqltest.strace. Note that this will be overwritten for each new test case, so it's most useful for running only one test.

    The strace-client option is functional from MySQL 5.5.20, and only supported on Linux. The option was available in earlier versions too, but was not working properly.

    • --strace-server

    Create strace output for the server. Will produce default strace output as mysqld.1.strace. Note that this will be overwritten each time the server is restarted, so it's most useful for running a single test, or if you want trace from the first test that fails.

    The strace-server option is available from MySQL 5.5.20, on Linux only.

    • --stress=stress options

    Start a server, but instead of running a test, run mysql-stress-test.pl with the supplied arguments. Arguments needed to communicate with the server will be automatically provided, the rest should be given as arguments to this option. Command line options for mysql-stress-test.pl should be separeted by a comma.

    The stress option was added in MySQL 5.5.17, it is not a direct replacement for the option of the same name that exists in version 1 of mysql-test-run.pl.

    • --suite=suite_name

    Run the named test suite. The default name is main (the regular test suite located in the mysql-test directory).

    • --suite-timeout=minutes

    Specify the maximum test suite runtime.

    • --testcase-timeout

    Specify the maximum test case runtime.

    • --timediff

    Adds to each test report for a test case, the total time in sconds and milliseconds passed since the preceding test ended. This option can only be used together with --timestamp, and has no effect without it.

    • --timer

    Cause mysqltest to generate a timing file. The default file is named ./var/log/timer.

    • --timestamp

    Prints a timestamp before the test case name in each test report line, showing when the test ended.

    • --tmpdir=path

    The directory where temporary file are stored. The default location is ./var/tmp. The environment variable MYSQL_TMP_DIR will be set to the path for this directory, whether it has the default value or has been set explicitly. This may be referred to in tests.

    • --unit-tests

    Force running of unit tests, overriding default behaviour or setting of the MTR_UNIT_TESTS variable.

    Running of unit tests was enabled from MySQL 5.5.11.

    • --unit-tests-report

    Extend the unit test run by also outputting the log from the test run, independently of whether it succeeded or not. This option implies --unit-tests so it is not necessary to specify both. The --unit-tests-report option is available in MySQL 5.5 from version 5.5.44, in 5.6 from version 5.6.25 as well as in MySQL 5.7.

    • --user=user_name

    The MySQL user name to use when connecting to the server.

    • --user-args

    Drops all non-essential command line arguments to the mysqld server, except those supplied with --mysqld arguemnts, if any. Only works in combination with --start, --start-and-exit or --start-dirty, and only if no test name is given.

    • --valgrind

    Run mysqltest and mysqld with valgrind. This and the following --valgrind options require that the executables have been build with valgrind support.

    When the server is run with valgrind, an extra pass over the server log file(s) will be performed after all tests are run, and any report with problems that have been reported at server shutdown will be extracted and printed. The most common warnings are memory leaks. With each report will also be listed all tests that were run since previous server restart; one of these is likely to have caused the problem.

    From MySQL 5.5.13, a final "pseudo" test named valgrind_report is added to the list of tests when the server is run in valgrind. This test is reported as failed if any such shutdown warnings were produced by valgrind. Pass or failure of this test is also added to the total test count reported.

    • --valgrind-clients

    Run all clients started by .test files with valgrind. This option requires valgrind 3.9 or later.

    --valgrind-clients was added in MySQL 5.7.9.

    • --valgrind-mysqld

    Run the mysqld server with valgrind.

    • --valgrind-mysqltest

    Run mysqltest with valgrind.

    • --valgrind-option=str

    Extra options to pass to valgrind.

    • --valgrind-path=path

    Specify the path name to the valgrind executable.

    • --vardir=path

    Specify the path where files generated during the test run are stored. The default location is ./var. The environment variable MYSQLTEST_VARDIR will be set to the path for this directory, whether it has the default value or has been set explicitly. This may be referred to in tests.

    • --verbose

    Give more verbose output regarding test execution. Use the option twice to get even more output. Note that the output generated within each test case is not affected.

    • --verbose-restart

    Write when and why servers are restarted between test cases.

    • --view-protocol

    Pass the --view-protocol option to mysqltest.

    • --vs-config=config_val

    Specify the configuration used to build MySQL (for example, --vs-config=debug --vs-config=release). This option is for Windows only.

    • --wait-all

    If --start or --start-dirty is used, wait for all servers to exit before termination. Otherise, it will terminate if one (of several) servers is restarted.

    • --warnings

    Search the server log for errors or warning after each test and report any suspicious ones; if any are found, the test will be marked as failed. This is the default behavior, it may be turned off with --nowarnings.

    • --with-ndbcluster-only

    Run only test cases that have ndb in their name.

COPYRIGHT

Copyright © 2006, 2015, Oracle and/or its affiliates. All rights reserved.

This documentation is free software; you can redistribute it and/or modify it only under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License.

This documentation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with the program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or see http://www.gnu.org/licenses/.

SEE ALSO
For more information, please refer to the MySQL Reference Manual, which may already be installed locally and which is also available online at http://dev.mysql.com/doc/.

AUTHOR
Oracle Corporation (http://dev.mysql.com/).