Patch Name: PHSS_28745

Patch Description: s700_800 10.20 OV OB4.10 patch - MA packet

Creation Date: 03/06/23

Post Date: 03/06/27

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OmniBackII A.04.10

Filesets:
	OMNIBACK-II.OMNI-ACS-P,A.04.10
	OMNIBACK-II.OMNI-DAS-P,A.04.10
	OMNIBACK-II.OMNI-HPUX-P,A.04.10
	OMNIBACK-II.OMNI-OTHUX-P,A.04.10
	OMNIBACK-II.OMNI-FXMA-P,A.04.10
	OMNIBACK-II.OMNI-NDMP-P,A.04.10

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_28745

Symptoms:
	PHSS_28745:
	Id = HSLco38298  SR:H555009054
	    Backup fails with an error:

	    "|Critical| From: BMA@<host> "<device>" Time:<time>
	     |90:30| SM/MA protocol error => aborting"

	Id = HSLco39535  SR:H555009430
	     Sanconf does not recognize the device that does not
	     have the /dev/rmt/*mn file name standard.

	Id = HSLco40131  SR:H555009630
	    Restore session from physically write protected tapes
	    fails with following error message:

	     "|Major| From: RMA-NDMP@hostname.com <host> <time>
	      Cannot open device (The medium is Write Protected.)"

	Id = HSLco40554  SR:H555009873
	    Format of SuperDLT tape fails with an error:

	     "|Critical| From: <host> "datalist" <time>
	      |90:41|     Invalid device type specified (14) =>
	      aborting".

	Id = HSLco40634  SR:H555009914
	    TapeAlert functionality for detecting dirty drives is
	    disabled by default.

	Id = HSLco40877  SR:H555010030
	    During NDMP Backup Session Omniback II Database gets
	    corrupted, which can be detected by running a
	    "omnidbcheck -sibf" command .

	Id = HSLco41099  SR:H555010150
	    Backup session fails with an error:

	     "|Minor| From: <host> "datalist" <time>
	      |90:190|      Invalid format version of OmniBack
	      II medium."

	Id = HSLco41118  SR:H555010157
	    Device T9840 is not supported.

	Id = HSLco41191  SR:H555010199
	    NDMP restore of the appending backup fails on EMC Calera
	    systems.

	Id = HSLco41222  SR:H555010214
	    Autoconfiguration of Bnchmark VS160, Compaq VS160,
	    HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
	    FastStor 2 Autoloader, HP SS1016 Artic Wolf, HP MSL6000
	    Series, HP ESL9000 Series, SEAGATE DAT DAT 06241-xxx
	    and Spectra-Logic Gator libraries fails.

	Id = HSLco41392  SR:H555010277
	    There are inconsistencies in output of silo query
	    command. Comparing the output of  two commands: "omnimm
	    -repository" and "omnimm -silo_query" returuns different
	    results.

	Id = HSLco41551  SR:H555010317
	    Tape does not get unloaded at the end of the backup
	    session.

	Id = HSLco41583  SR:H555010332
	    Media Agent fails when it tries to connect to the STK
	    library if logical drive name is different from user id.

	Id = HSLco41800  SR:H555010392
	    ACS and DAS Media Agent do not create tape statistics
	    logs.

	PHSS_28333:
	Id = HSLco31403  SR: H555006826
	    Tape is not marked poor after append fails.

	Id = HSLco37256  SR: H555008826
	    Restore of incrementally backed up objects fails.

	Id = HSLco37582  SR: H555008870
	    "ssi.sh" script fails with error:

	      "/opt/omni/acs/ssi.sh|17|: grep:  not found.

	       Starting ACS daemons...
	       /opt/omni/acs/ssi.sh|4|: ps:  not found.
	       /opt/omni/acs/ssi.sh|4|: grep:  not found.
	       Problems starting ACS Event Logger
	       Unsuccessful in starting ACS daemons".

	Id = HSLco38124  SR: H555009018
	    OmniBack II is not gathering tape I/O operation
	    statistics.

	Id = HSLco38160  SR: H555009027
	    OmniBack II does not show the copy progress of tapes
	    in the GUI/CLI session report.

	Id = HSLco38372  SR: H555009078
	    Autoconfiguration of Mammoth2 device fails.

	Id = HSLco38412  SR: H555009095
	    When running backup and "omnimm -silo_query" command
	    at the same time, status of tapes that are used for
	    backup is set to "non resident".

	Id = HSLco38420  SR: H555009101
	    Initialization of Magneto Optical (MO) medium fails
	    with error:

	    "|Major| From: MMA@<host> "device"  Time: <time>
	     |90:129|        Medium has no capacity."

	Id = HSLco38492  SR: H555009139
	    Media Agent reports errors:

	    "|Minor| From: BMA@<host> "<device>"  Time: <time>
	     |90:197|    Could not read data (attribute
	     ID=AUX_OMNIBACK_MEDIA_HEADER) from cartridge memory ().

	     |Minor| From: BMA@<host> "<device>"  Time:<time>
	     |90:198|    Could not write data (attribute
	     ID=<Host attributes>) from cartridge memory ()."

	Id = HSLco39232  SR: H555009315
	    Backup fails with error:

	    "|Major| From: BMA@<host> "<device>" Time: <time>
	     |90:51|     |16| Device busy
	        Cannot write to device ((NULL))"

	Id = HSLco39489  SR: H555009407
	    OmniBack II is performing unnecessary cleanings on
	    DLT drives.

	Id = HSLco40523  SR: H555009859
	    Even if "OB2ACS_VOLUMEDRIVE_POOR=1" option is enabled
	    in ".omnirc" file, OmniBack II does not mark tape as
	    "Poor" in case tape mount operation fails with
	    ACS error: "STATUS_VOLUME_IN_DRIVE".

	PHSS_27458:
	Id = HSLco30962, HSLco35407  SR: H555006734, H555008421
	    When testing the drive cleaning configuration
	    using OmniBack II dirty drive simulation method
	    on DDS4 autoloader DAT40x6i/e the tape
	    unload fails with the following error message:

	      "[12:5]  Internal error in
	       ("/src/ma/pol/polmax.c /main/r31_split/3":565)
	        => process aborted
	        This is an unexpected condition and is likely
	        due to a combination of circumstances involving
	        both this product  and the operating system.
	        Report this error to your post-sales OmniBack II
	        Support Representative."

	Id = HSLco34581  SR: H555007993
	    devbra is not working properly with devices in
	    environments where "st_san_safe" kernel parameter
	    is enabled.

	Id = HSLco34684  SR: H555008050
	    Backup on LTO device on AIX platform fails with error:

	      "Cannot close after write problem. ([5] There is an
	       input or output error.)"

	Id = HSLco34910  SR: H555008179
	    New inquiry strings are needed for Compaq devices.

	Id = HSLco35035  SR: H555008242
	    During backup of NDMP integration Backup Media Agent
	    session completes with failures.

	Id = HSLco35178  SR: H555008328
	    Backup fails with error:

	      "[90:135]  Can not eject medium. ([5] I/O error)"

	Id = HSLco35450  SR: H555008428
	    Auto configuration of Overland Data Neo Series
	    LXN2000 and Neo Series LXN4000 with Quantum
	    SDLT220 tape drives does not work.

	Id = HSLco35670  SR: H555008496
	    OmniBack II displays incorrect message in Graphical
	    User Interface (GUI) when Medium header check
	    verification is performed:

	       "Medium verification completed, 0 errors found"

	Id = HSLco35704  SR: H555008504
	    Bulk eject functionality does not work after
	    installing patch PHSS_26357/PHSS_26358.

	Id = HSLco36329  SR: H555008634
	    OmniBack II does not unload tape at the end of the
	    backup.

	Id = HSLco36526  SR: B555014660
	    Sanconf does not distinguish between tape devices
	    having serial numbers longer than 10 digits.

	Id = HSLco36656  SR: H555008680
	    Cell Manager list and reformat does not work on
	    UNIX platforms.

	Id = HSLco35925  SR: H555008555
	    Backup to multihost device fails in case that
	    reconnect option is used.

	Id = HSLco36147  SR: H555008610
	    When during the backup end of tape is reached BMA
	    ends abnormally.

	Id = HSLco36472  SR: H555008655
	    Backup to file device fails with error:

	    "[Major] From: BMA@<host_name> "<device_name>"
	     Time: <dd.mm.yy hh:mm:ss>
	     [90:51]         /FileDevice
	        Cannot write to device ([27] File too large)"

	Id = HSLco37281  SR: H555008834
	    Backup to tape device on AIX platform fails with error:

	     "[Major] From: MMA@<host_name> "<device_name>"
	      Time: <dd.mm.yy hh:mm:ss>
	      [90:173]        REQUEST SENSE call failed.
	      Possible cleanme signal detection failure.
	        ([14] Bad address)"

	     "[Critical] From: MMA@<host_name> "device_name"
	      Time: <dd.mm.yy hh:mm:ss>
	      [90:43]         /dev/rmt0.1
	         Invalid physical device type => aborting"

	Id = HSLco36985, HSLco36532  SR: H555008753, H555008662
	    Incremental backup of big Net App filer volumes fails
	    if there are a lot of exclude parameters specified.

	Id = HSLco36901  SR: H555008728
	    Backup to direct access media fails with error:

	    "Cannot write to device
	     ([6] No such device or address)"

	Id = HSLco36135  SR: H555008608
	    ACS Media Agent does not retry on errors.

	Id = HSLco36960  SR: H555008747
	    Backup to 9840 device fails with error:

	    "Invalid physical device type => aborting."

	Id = JAGae28035  SR: 8606263710
	    Backup to tape drive fails if cleaning tape is loaded.

	PHSS_26357:
	Id = HSLco33017  SR:H555007269
	    Library robotic mechanism is not released after tape
	    eject.

	Id = HSLco33264  SR:H555007381
	    After failed backup session due to an I/O drive status
	    error, important information about the error in
	    debug.log file is missing.

	Id = HSLco33563  SR:H555007513
	    Medium verification error is reported after
	    successfully completed backup:

	      "Medium verification completed, 1 errors found".

	Id = HSLco33982  SR:H555007663
	    ACSLS query fails for STK 9940 media.

	Id = HSLco34050  SR:H555007700
	    Backup fails with an error:

	    "[Critical] From: BMA@<HOST> "<DEVICE>" Time:<TIME>
	     [90:30] SM/MA protocol error => aborting"

	Id = HSLco34139  SR:H555007739
	    After OmniBack II detects dirty drive and loads a
	    cleaning tape, option for medium header check aborts
	    the backup session.

	Id = HSLco34266  SR:H555007798
	    If 'InitOnLoosePolicy' is set to 0 and foreign tape
	    is loaded OmniBack II aborts backup session instead
	    of issuing a mount request.

	Id = NSMbb44407  SR:B555013119
	    Sony DTF device does not work correctly.

	PHSS_26219:
	Id = HSLco30584  SR: H555006666
	    Omniback does not check if the medium is corrupted
	    at the end of the backup.

	Id = HSLco31274  SR: H555006790
	    DAS Media Agent cannot handle more than 15 drives.

	Id = HSLco31293  SR: H555006798
	    Querying GRAU libraries hangs.

	Id = HSLco31696  SR: H555006885
	    ACS Media Agent does not recognize LTO drives.

	Id = NSMbb44086  SR: B555012905
	    NDMP Media Agent packages do not contain devbra.

	Id = HSLco30326  SR: H555006608
	    OmniBackII A.04.10 does not support HP VS80 and
	    Benchmark VS640 libraries.

	Id = HSLco32416 SR: H555007051
	    During backup following messages are reported:

	    [Normal] From: BSM@HostName "Datalist"  Time: <time>
	    [61:1011]  Received reconnect request from BMA@HostName
	    "Device".

	    [Normal] From: BSM@HostName "Datalist"  Time: <time>
	    BMA@HostName "Device" reconnected successfully.

Defect Description:
	PHSS_28745:
	Id = HSLco38298
	    In case that reconnect option is used for backup,
	    it is possible that Media Agent fails due to a
	    protocol error.

	Resolution:
	    Protocol between Session Manager and Media Agent is
	    changed in order not to acknowledge normal formatted
	    messages.

	Id = HSLco39535
	    Only device files of the format /dev/rmt/*mn are
	    filtered in devlist_ux.c.

	Resolution:
	    New environment variable OB2BROWSEALLDEVICES is
	    introduced in ".omnirc" file. Possible values are
	    0 (default) and 1. If set to 1 the function will
	    also browse the /dev/rmt/*n device files.

	Id = HSLco40131
	    The tape is unnecessarily checked for physical write
	    protection during Restore Session.

	Resolution:
	    OmniBack II properly handles physically write protected
	    tapes.

	Id = HSLco40554
	    SuperDLT is not supported.

	Resolution:
	    SuperDLT is added as supported device in OmniBack II
	    DAS Media Agent.

	Id = HSLco40634
	    TapeAlert functionality for detecting dirty drives is
	    disabled by default.

	Resolution:
	    TapeAlert functionality for detecting dirty drives is
	    enabled by default.

	Id = HSLco40877
	    Meta files are removed although there are still object
	    versions in the Omniback II Database with reference to
	    those meta files.

	Resolution:
	    Meta files are no longer removed if there are object
	    versions in the Omniback II Database with references
	    to them.

	Id = HSLco41099
	    Backup session on Linux Red Hat fails if IBM 3581 driver
	    is not installed.

	Resolution:
	    In case that IBM 3581 driver is not installed on the
	    system, environment variable OB2NOIBM3581=1 must be
	    added in ".omnirc" file.

	Id = HSLco41118
	    Entry for T9840 and T9940 devices is missing from device
	    table.

	Resolution:
	    Devices T9840 and T9940 are added to the device table.

	Id = HSLco41191
	    NDMP by default skips tape filemarks, but Celera
	    implements filemark read in NDMP protocol version 3
	    and  filemarks are not skipped.

	Resolution:
	    By setting variable OB2NDMPFMV4=1 in ".omnirc" file
	    OmniBack  II properly handles filemark skip when
	    backup is appended.

	Id = HSLco41222
	    Autoconfiguration of Bnchmark VS160, Compaq VS160,
	    HP 2Gen LTO, Seagate DAT STDL42401LW drives and ADIC
	    FastStor 2 Autoloader, HP SS1016 Artic Wolf Lib,
	    HP MSL6000 Series Lib, HP ESL9000 Series Lib,
	    SEAGATE DAT DAT 06241-xxx and Spectra-Logic Gator
	    libraries fails because they are not supported by
	    Data Protector.

	Resolution:
	    New entries are added in "scsitab" file in order to
	    support Bnchmark VS160, Compaq VS160, HP 2Gen LTO,
	    Seagate DAT STDL42401LW drives and ADIC FastStor 2
	    Autoloader, HP SS1016 Artic Wolf Lib, HP MSL6000
	    Series Lib, HP ESL9000 Series Lib, SEAGATE DAT DAT
	    06241-xxx and Spectra-Logic Gator libraries.

	Id = HSLco41392
	    omnimm -silo_query command returns invalid number of
	    media because every 1000th medium is counted twice.

	Resolution:
	    Function returning the list and number of media
	    is changed.

	Id = HSLco41551
	    If connection between BMA and UMA is broken during
	    the backup and no IPC error is reported, BMA terminates
	    session when it fails to instruct UMA to unload the
	    tape.

	Resolution:
	    New instance of UMA is started.

	Id = HSLco41583
	    All MA agents use logical drive names as user_id when
	    accessing a STK library. Library only accepts unique
	    user_id, so Omniback II MA should access it with a
	    unique user_id.

	Resolution:
	    The user_id MA used to access the library has been
	    unified.

	Id = HSLco41800
	    Tape statistics logging is not implemented in ACS
	    and DAS Media Agent.

	Resolution:
	    Functionality is implemented.

	    Part of SSPUX410_072.

	PHSS_28333:
	Id = HSLco31403
	    If append fails during positioning, the tape is not
	    marked poor.

	Resolution:
	    Error handling is improved.

	Id = HSLco37256
	    Because of drive problems, Media Agent does not
	    position the tape to the right location.

	Resolution:
	    The way Restore Media Agent finds the right position
	    on the tape has been changed. If you receive error
	    message:

	      "|Major|From RMA@<host> "<device>" time:<time>
	       |90:184| Cannot forward block. |Details unknown.|"

	    then set new environment variable OB2NOBLOCKSEEK in
	    .omnirc file to 1 .

	Id = HSLco37582
	    When started during the system startup, "ssi.sh"
	    script fails because environment variable PATH is
	    not set.

	Resolution:
	    PATH is set in the "ssi.sh" script and works
	    correctly during the system startup.

	    Part of SSPUX410_045.

	Id = HSLco38124
	    Tape I/O operation statistics functionality is not
	    implemented in OmniBack II.

	Resolution:
	    Tape I/O operation statistics functionality was added.
	    To enable it, add the new environment variable
	    "OB2TAPESTATISTICS" to the ".omnirc" file and switch
	    it on (OB2TAPESTATISTICS=1).
	    Tape I/O operation statistics is then logged in
	    "/var/opt/omni/log/tapestatistics.log" file.
	    The statistics consist of:
	     1. Errors corrected without substantial delay
	     2. Errors corrected with possible delays
	     3. Total rewrites or rereads
	     4. Total errors corrected
	     5. Total times correction algorithm processed
	     6. Total bytes processed
	     7. Total uncorrected errors

	    Part of SSPUX410_049.

	Id = HSLco38160
	    OmniBack II does not include 'show tape copy progress'
	    functionality.

	Resolution:
	    This functionality is added. To enable it, add the
	    new environment variable "OB2COPYTAPEMSG=k"
	    in ".omnirc" file. OmniBack II then for every k-th
	    segment shows a message:

	    "|Normal| From: CMA-ACS@<hostname> "<device>"
	     Time: <time>
		 Copying segment k"

	Id = HSLco38372
	    The device autoconfiguration fails, because the drive
	    is not recognized.

	Resolution:
	    Autoconfiguration "Product ID" string in scsitab file
	    is changed from "Mammoth2" to "MAMMOTH2".

	Id = HSLco38412
	    OmniBack II does not properly handle mounted tapes.

	Resolution:
	    Tapes in home position and mounted tapes are handled
	    the same way. They are both considered 'resident'.

	Id = HSLco38420
	    In case that Media Agent host uses the old NIO SCSI
	    bus, OmniBack II is not able to get the capacity of
	    a mounted Magneto Optical (MO) medium.

	Resolution:
	    Media Agent is improved to correctly get the
	    capacity of the MO medium.

	Id = HSLco38492
	    Read/write of Cartridge Memory on LTO devices does not
	    work properly.

	Resolution:
	    Media Agent is improved to work correctly with
	    Cartridge Memory on LTO devices.

	Id = HSLco39232
	    In AIX SAN environment it is possible that a device
	    is not available for a couple of seconds due to other
	    activities in SAN environment. In such cases the
	    "write()" command fails with EBUSY error.

	Resolution:
	    Retry is added in case of EBUSY error. Retry can be
	    configured with environment variables
	    OB2SPTRETRY (default 10 retries) and
	    OB2SPTSLEEP (default 10 seconds) in ".omnirc" file.

	    Part of SSPUX410_057.

	Id = HSLco39489
	    OmniBack II is performing cleaning of DLT drives in
	    case that cleaning light is on. But in some cases
	    this light is still on even after drive is cleaned
	    and OmniBack II repeats cleaning cycle.

	Resolution:
	    New environment variable, "OB2DLTCLEANINGLIGHTCHECK"
	    is added in ".omnirc" file. By default it is set to
	    "0" and cleaning is not performed when cleaning light
	    is on. If variable is set to "1", cleaning is performed.

	Id = HSLco40523
	    OmniBack II is not designed to mark tape as occupied
	    when tape mounting fails with "STATUS_VOLUME_IN_DRIVE".

	Resolution:
	    OmniBack II properly marks tape as "Poor" in case
	    when mount operation fails with ACS error:
	    "STATUS_VOLUME_IN_DRIVE".

	    Part of SSPUX410_058.

	PHSS_27458:
	Id = HSLco30962, HSLco35407
	    When the devices automatically unloads, OmniBack II
	    tries to unload but fails since the device already
	    unloaded tape.

	Resolution:
	    New environment variable OB2NOEJECTCLEANINGTAPE which
	    has to be set to 1 in omnirc file, was implemented in
	    order to prevent OmniBack II to unload the cleaning
	    tape.

	Id = HSLco34581
	    Enabled "st_san_safe" parameter causes incorrect
	    system handling for the devices with "rewind on close"
	    implemented. This causes devbra to return unusable
	    devices.

	Resolution:
	    devbra is adapted in order to work properly when
	    "st_san_safe" kernel parameter is enabled.

	Id = HSLco34684
	    Media Agent on AIX platform does not handle End
	    of Medium correctly for LTO devices.

	Resolution:
	    End of Medium handling is improved for LTO devices
	    on AIX platform.

	Id = HSLco34910
	    New inquiry strings are needed for Compaq devices.

	Resolution:
	    New inquiry strings are added for Compaq devices.

	Id = HSLco35035
	    In case that NDMP backup contains large number of
	    files, Backup Media Agent uses large amount of memory.

	Resolution:
	    Backup Media Agent memory usage is improved so it can
	    backup up to 5 million files.

	Id = HSLco35178
	    Sometimes it is possible that eject operation fails
	    after the medium header verification.

	Resolution:
	    Additional medium rewind operation is added before the
	    offline operation.

	Id = HSLco35450
	    Auto configuration of Overland Data Neo Series
	    LXN2000 and Neo Series LXN4000with Quantum
	    SDLT220 tape drives does not work because of
	    inquiry strings missing.

	Resolution:
	    Inquiry strings are added for auto configuration.

	Id = HSLco35670
	    Message is implying that medium verification has been
	    done although only the medium header sanity check has
	    been performed.

	Resolution:
	    Message is changed to:

	      "Medium header verification completed".

	    Part of SSPUX410_028.

	Id = HSLco35704
	    When performing bulk eject media agent aborts session.

	Resolution:
	    Ejecting tape from mailslot works properly.

	Id = HSLco36329
	    If during the backup connection between BMA and UMA
	    is broken and no IPC error is reported, BMA terminates
	    when it fails to instruct UMA to unload the tape.

	Resolution:
	    New instance of UMA is started.

	Id = HSLco36526
	    Devbra and sanconf are limited to 10 character serial
	    numbers only. When there are devices with 12 digit
	    SN detected, devbra truncates the last two digits.
	    As a result, several physical devices are then treated
	    as one and the same device.

	Resolution:
	    Devbra is using all digits of the device SN to
	    distinguish between devices.

	    Part of SSPUX410_040.

	Id = HSLco36656
	    Reading and accessing the Cell Manager info resulted
	    in xma ending abnormally.

	Resolution:
	    Source code for updating Cell Manager info has been
	    modified slightly.

	Id = HSLco35925
	    Media Agent protocol is incorrect for the devices
	    with multi-host connection.

	Resolution:
	    Media Agent protocol is improved for the devices using
	    multi-host connections.

	    Part of SSPUX41_031.

	Id = HSLco36147
	    Solaris Media Agent is not capable of handling SCSI
	    sense information bigger than 144 bytes.
	    Problem typically occurs in combination with certain
	    types of SAN FC switches/drivers.

	Resolution:
	    Buffer receiving SCSI sense information is increased.

	    Part of SSPUX410_035.

	Id = HSLco36472
	    Media Agent is not able to write beyond 2GB limitation
	    on file devices.

	Resolution:
	    The 2Gb limitation on file devices is increased.

	    Part of SSPUX410_037.

	Id = HSLco37281
	    OmniBack II does not support FC devices on
	    AIX platform.

	Resolution:
	    Support for FC devices on AIX platform is added.

	    Part of SSPUX410_038.

	Id = HSLco36985, HSLco36532
	    Ascii to Unicode conversions of large number of
	    filenames generate stack overflow while transferring
	    the catalog information.

	Resolution:
	    Function for Ascii to Unicode conversion is replaced.

	    Part of SSPUX410_042.

	Id = HSLco36901
	    In case that backup to direct access devices contains
	    large number of small files, it is possible that
	    catalog size is bigger than space available on medium.
	    Because of this backup fails to write complete catalog
	    to the medium.

	Resolution:
	    Calculation of space needed for catalog is improved in
	    order not to exceed available space.

	Id = HSLco36135
	    New values are returned by SN6000.

	Resolution:
	    New returned values for SN6000 are supported.

	Id = HSLco36960
	    OmniBack II does not work correctly with 9840 device
	    which product ID starts with "T9840".

	Resolution:
	    Media Agent is improved in order to support 9840
	    devices which product ID starts with "T9840".

	Id = JAGae28035
	    Automatic cleaning does not work if library does not
	    have barcode support.

	Resolution:
	    New OmniBack II environment variable is added:
	    OB2CLNSLOT. Variable has to be set on Media Agent host
	    and has to contain number of Cleaning slot configured
	    for the library.

	PHSS_26357:
	Id = HSLco33017
	    When split library in SAN environment is assigned to
	    2 systems and "omnimm -eject" is run on host B, host A
	    can no longer access the changer.

	Resolution:
	    Library robotic mechanism is released after tape
	    eject.

	Id = HSLco33264
	    Not all information is written to the debug.log after
	    I/O drive status error occurs.

	Resolution:
	    Information is added to the debug.log file.

	Id = HSLco33563
	    With OmniBack II A.04.00 release verification of DA
	    block part is introduced. In case that data length for
	    the data record is "0", verify reports an error.

	Resolution:
	    Verify is changed in order to ignore "0" data length
	    for data record, because this does not influence data
	    restore.

	    Part of SSPUX410_016.

	Id = HSLco33982
	    In case that STK 9940 drives are configured as T9840,
	    query does not work correctly because OB2 expects that
	    those drives are configured as type 3590.

	Resolution:
	    Configuration for STK 9940 is changed in order to be
	    recognized as T9840 media type.

	Id = HSLco34050
	    In case in which reconnect option is used for backup,
	    it is possible that Media Agent fails due to a protocol
	    error.

	Resolution:
	    Protocol between Session Manager and Media Agent is
	    changed in order not to acknowledge normal formatted
	    messages.

	    Complete functionality of this fix will be available
	    when Cell Server patch PHSS_26353/PHSS_26354 is
	    installed - or successors of it.

	    Part of SSPUX410_017.

	Id = HSLco34139
	    Header verification can not handle a dirty drive
	    situation.

	Resolution:
	    If OmniBack II detects cleaning tape medium header is
	    not checked before unloading.

	Id = HSLco34266
	    When loading a tape medium header check is run. If the
	    medium is foreign or blank OmniBack II aborts backup
	    session.

	Resolution:
	    If loaded tape is foreign or blank OmniBack II does not
	    check medium header when closing device.

	Id = NSMbb44407
	    In order for Sony DTF device to work correctly,
	    "OB2DBD=1" entry has to be added to omnirc file.

	Resolution:
	    Entry for Sony DTF drive is updated in order to make
	    the device work correctly without omnirc entry.

	PHSS_26219:
	Id = HSLco30584  SR: H555006666
	    Medium header verification is not implemeted.

	Resolution:
	    Environment variable OB2DISABLEHEADERCHECK is
	    introduced.
	    Medium header is checked by default. Setting the
	    variable to 1 in /opt/omni/.omnirc file turns the
	    functionality off.

	Id = HSLco31274
	    DAS Media Agent is checking incorrect environment
	    variable.

	Resolution:
	    Setting environment variable OB2DASDRIVESTATUS2 to 1
	    in the /opt/omni/omnirc file makes usage of more than
	    15 drives possible.

	Id = HSLco31293
	    Query operation hangs when performed on GRAU
	    libraries with more than 1000 tapes.

	Resolution:
	    Query operation can handle more than 1000 tapes
	    within GRAU library.

	Id = HSLco31696
	    LTO drives are not supported with Omniback ACS
	    integration.

	Resolution:
	    Omniback ACS integration supports LTO drives.

	Id = NSMbb44086
	    NDMP Media Agent packages do not contain devbra.

	Resolution:
	    devbra is added to NDMP Media Agent packages.

	Id = HSLco30326
	    OmniBackII A.04.10 does not support HP VS80 and
	    Benchmark VS640 libraries.

	Resolution:
	    OmniBackII A.04.10 supports HP VS80 and Benchmark VS640
	    libraries on HP-UX, Linux and Sun Solaris systems.

	    Part of SSPUX410_002.

	Id = HSLco32416
	    In case that reconnect option is used and OB2PORTRANGE
	    environment variable is set, it is possible that
	    reconnect occurs at the beginning of the session
	    due to incorrectly set timeout.

	Resolution:
	    Timeout is set to correct value.

SR:
	H555010332 H555009873 H555010317 H555010157 H555010392
	H555009430 H555010277 H555009054 H555009630 H555010199
	H555010030 H555009914 H555010150 H555010214 H555009101
	H555009859 H555009315 H555009018 H555009027 H555009407
	H555009139 H555006826 H555008870 H555009095 H555008826
	H555009078 H555008728 H555008179 H555008747 H555008496
	H555007993 8606263710 B555014660 H555008050 H555008421
	H555008610 H555008242 H555008504 H555006734 H555008328
	H555008634 H555008608 H555008428 H555008662 H555008680
	H555008834 H555008753 H555008555 H555008655 B555013119
	H555007739 H555007700 H555007798 H555007513 H555007381
	H555007663 H555007269 B555012905 H555006885 H555006608
	H555007051 H555006798 H555006790 H555006666

Patch Files:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
		A.04.10/packet.Z

what(1) Output:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
		A.04.10/packet.Z:
		None

cksum(1) Output:
	3188565085 2450921 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	2736772 2451013 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	716968445 2068373 /opt/omni/databases/vendor/ma/gpl/i386/
		linux-60/A.04.10/packet.Z
	9845770 2148655 /opt/omni/databases/vendor/ma/ibm/rs6000/
		aix-42/A.04.10/packet.Z
	2636096177 1871958 /opt/omni/databases/vendor/ma/sco/i386/
		sco_sv/A.04.10/packet.Z
	3178890692 2101773 /opt/omni/databases/vendor/ma/sequent/
		i386/dynix/A.04.10/packet.Z
	577989273 2405525 /opt/omni/databases/vendor/ma/siemens/
		r400/sinix/A.04.10/packet.Z
	652591458 2406957 /opt/omni/databases/vendor/ma/sun/sparc/
		solaris-26/A.04.10/packet.Z
	2442494832 3014629 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	1534168841 3018955 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	3169319178 3015109 /opt/omni/databases/vendor/acs/sun/sparc/
		solaris-26/A.04.10/packet.Z
	575881072 2701407 /opt/omni/databases/vendor/acs/ibm/rs6000/
		aix-42/A.04.10/packet.Z
	209902435 2572723 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3157661095 2585857 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	3424239432 2540625 /opt/omni/databases/vendor/das/ibm/
		rs6000/aix-42/A.04.10/packet.Z
	3393058265 2898142 /opt/omni/databases/vendor/ndmp/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	312596470 2895677 /opt/omni/databases/vendor/ndmp/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	2432899589 2779265 /opt/omni/databases/vendor/ndmp/sun/
		sparc/solaris-7/A.04.10/packet.Z
	1713245030 2888385 /opt/omni/databases/vendor/fxma/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	138982856 2895092 /opt/omni/databases/vendor/fxma/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3251273579 2756762 /opt/omni/databases/vendor/fxma/sun/
		sparc/solaris-26/A.04.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	If any newer SSP for the Media Agent is installed
	on your system, you must re-apply the SSP after
	installing this Media Agent patch.

	If the Cell Server is running on HP-UX, then the
	Cell Server patch PHSS_27454/PHSS_27455 (or later)
	for HP-UX must be installed before this Media Agent
	patch. If this is not done, the connection between
	Media Agents and Cell Server will no longer work.

	In a mixed environment, if the Cell Server is running
	on Windows NT/2000, then Cell Server patch
	OMNIBACK_00061 (or later) must be installed at the
	same time.

	PHSS_28740:
	Cell Server (CS) packet patch,
	Release Date: End of July
	Id = HSLco38298  SR: H555009054
	Id = HSLco40877  SR: H555010030
	PHSS_28740 is required for these defect fixes.

	PHSS_28738:
	Cell Console (CC) packet patch,
	Release Date: Available
	Id = HSLco36526  SR: B555014660
	Id = HSLco39535  SR: H555009430
	PHSS_28738 is required for these defect fixes.

	PHSS_28731:
	Cell Server (CS) packet patch,
	Release Date: Available
	Id = HSLco36656  SR:H555008680
	Id = HSLco35035  SR:H555008242
	Id = HSLco34050  SR:H555007700
	PHSS_28731 is required for these defect fixes.

Supersedes:
	PHSS_26219 PHSS_26357 PHSS_27458 PHSS_28333

Equivalent Patches:
	PHSS_28746:
	s700: 11.00 11.11 11.20
	s800: 11.00 11.11 11.20

Patch Package Size: 50170 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_28745

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_28745.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_28745.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_28745.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_28745.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_28745:
	NOTE!
	This Patch has to be installed on the Installation
	Server host.

	The OB2 Media Agent must be redistributed to the Media
	Agent client system(s) after the installation of the patch
	in order to get the fixes into effect.

	For distribution of the Media Agent, refer to the
	OmniBackII Installation guide.


	Patch includes the following Site Specific Patches:
	   SSPUX410_002
	   SSPUX410_016
	   SSPUX410_017
	   SSPUX410_028
	   SSPUX410_031
	   SSPUX410_035
	   SSPUX410_037
	   SSPUX410_038
	   SSPUX410_040
	   SSPUX410_042
	   SSPUX410_045
	   SSPUX410_049
	   SSPUX410_057
	   SSPUX410_058
	   SSPUX410_072