Patch Name: PHSS_27458

Patch Description: s700_800 10.20 OV OB4.10 patch - MA packet

Creation Date: 02/10/17

Post Date:  02/10/22

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OmniBackII A.04.10

Filesets:
	OMNIBACK-II.OMNI-ACS-P,A.04.10
	OMNIBACK-II.OMNI-DAS-P,A.04.10
	OMNIBACK-II.OMNI-HPUX-P,A.04.10
	OMNIBACK-II.OMNI-OTHUX-P,A.04.10
	OMNIBACK-II.OMNI-FXMA-P,A.04.10
	OMNIBACK-II.OMNI-NDMP-P,A.04.10

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_27458

Symptoms:
	PHSS_27458:
	Id = HSLco30962, HSLco35407  SR: H555006734, H555008421
	    When testing the drive cleaning configuration
	    using OmniBack II dirty drive simulation method
	    on DDS4 autoloader DAT40x6i/e the tape
	    unload fails with the following error message:

	      "[12:5]  Internal error in
	       ("/src/ma/pol/polmax.c /main/r31_split/3":565)
	        => process aborted
	        This is an unexpected condition and is likely
	        due to a combination of circumstances involving
	        both this product  and the operating system.
	        Report this error to your post-sales OmniBack II
	        Support Representative."

	Id = HSLco34581  SR: H555007993
	    devbra is not working properly with devices in
	    environments where "st_san_safe" kernel parameter
	    is enabled.

	Id = HSLco34684  SR: H555008050
	    Backup on LTO device on AIX platform fails with error:

	      "Cannot close after write problem. ([5] There is an
	       input or output error.)"

	Id = HSLco34910  SR: H555008179
	    New inquiry strings are needed for Compaq devices.

	Id = HSLco35035  SR: H555008242
	    During backup of NDMP integration Backup Media Agent
	    session completes with failures.

	Id = HSLco35178  SR: H555008328
	    Backup fails with error:

	      "[90:135]  Can not eject medium. ([5] I/O error)"

	Id = HSLco35450  SR: H555008428
	    Auto configuration of Overland Data Neo Series
	    LXN2000 and Neo Series LXN4000 with Quantum
	    SDLT220 tape drives does not work.

	Id = HSLco35670  SR: H555008496
	    OmniBack II displays incorrect message in Graphical
	    User Interface (GUI) when Medium header check
	    verification is performed:

	       "Medium verification completed, 0 errors found"

	Id = HSLco35704  SR: H555008504
	    Bulk eject functionality does not work after
	    installing patch PHSS_26357/PHSS_26358.

	Id = HSLco36329  SR: H555008634
	    OmniBack II does not unload tape at the end of the
	    backup.

	Id = HSLco36526  SR: B555014660
	    Sanconf does not distinguish between tape devices
	    having serial numbers longer than 10 digits.

	Id = HSLco36656  SR: H555008680
	    Cell Manager list and reformat does not work on
	    UNIX platforms.

	Id = HSLco35925  SR: H555008555
	    Backup to multihost device fails in case that
	    reconnect option is used.

	Id = HSLco36147  SR: H555008610
	    When during the backup end of tape is reached BMA
	    ends abnormally.

	Id = HSLco36472  SR: H555008655
	    Backup to file device fails with error:

	    "[Major] From: BMA@<host_name> "<device_name>"
	     Time: <dd.mm.yy hh:mm:ss>
	     [90:51]         /FileDevice
	        Cannot write to device ([27] File too large)"

	Id = HSLco37281  SR: H555008834
	    Backup to tape device on AIX platform fails with error:

	     "[Major] From: MMA@<host_name> "<device_name>"
	      Time: <dd.mm.yy hh:mm:ss>
	      [90:173]        REQUEST SENSE call failed.
	      Possible cleanme signal detection failure.
	        ([14] Bad address)"

	     "[Critical] From: MMA@<host_name> "device_name"
	      Time: <dd.mm.yy hh:mm:ss>
	      [90:43]         /dev/rmt0.1
	         Invalid physical device type => aborting"

	Id = HSLco36985, HSLco36532  SR: H555008753, H555008662
	    Incremental backup of big Net App filer volumes fails
	    if there are a lot of exclude parameters specified.

	Id = HSLco36901  SR: H555008728
	    Backup to direct access media fails with error:

	    "Cannot write to device
	     ([6] No such device or address)"

	Id = HSLco36135  SR: H555008608
	    ACS Media Agent does not retry on errors.

	Id = HSLco36960  SR: H555008747
	    Backup to 9840 device fails with error:

	    "Invalid physical device type => aborting."

	Id = JAGae28035  SR: 8606263710
	    Backup to tape drive fails if cleaning tape is loaded.

	PHSS_26357:
	Id = HSLco33017  SR:H555007269
	    Library robotic mechanism is not released after tape
	    eject.

	Id = HSLco33264  SR:H555007381
	    After failed backup session due to an I/O drive status
	    error, important information about the error in
	    debug.log file is missing.

	Id = HSLco33563  SR:H555007513
	    Medium verification error is reported after
	    successfully completed backup:

	      "Medium verification completed, 1 errors found".

	Id = HSLco33982  SR:H555007663
	    ACSLS query fails for STK 9940 media.

	Id = HSLco34050  SR:H555007700
	    Backup fails with an error:

	    "[Critical] From: BMA@<HOST> "<DEVICE>" Time:<TIME>
	     [90:30] SM/MA protocol error => aborting"

	Id = HSLco34139  SR:H555007739
	    After OmniBack II detects dirty drive and loads a
	    cleaning tape, option for medium header check aborts
	    the backup session.

	Id = HSLco34266  SR:H555007798
	    If 'InitOnLoosePolicy' is set to 0 and foreign tape
	    is loaded OmniBack II aborts backup session instead
	    of issuing a mount request.

	Id = NSMbb44407  SR:B555013119
	    Sony DTF device does not work correctly.

	PHSS_26219:
	Id = HSLco30584  SR: H555006666
	    Omniback does not check if the medium is corrupted
	    at the end of the backup.

	Id = HSLco31274  SR: H555006790
	    DAS Media Agent cannot handle more than 15 drives.

	Id = HSLco31293  SR: H555006798
	    Querying GRAU libraries hangs.

	Id = HSLco31696  SR: H555006885
	    ACS Media Agent does not recognize LTO drives.

	Id = NSMbb44086  SR: B555012905
	    NDMP Media Agent packages do not contain devbra.

	Id = HSLco30326  SR: H555006608
	    OmniBackII A.04.10 does not support HP VS80 and
	    Benchmark VS640 libraries.

	Id = HSLco32416 SR: H555007051
	    During backup following messages are reported:

	    [Normal] From: BSM@HostName "Datalist"  Time: <time>
	    [61:1011]  Received reconnect request from BMA@HostName
	    "Device".

	    [Normal] From: BSM@HostName "Datalist"  Time: <time>
	    BMA@HostName "Device" reconnected successfully.

Defect Description:
	PHSS_27458:
	Id = HSLco30962, HSLco35407
	    When the devices automatically unloads, OmniBack II
	    tries to unload but fails since the device already
	    unloaded tape.

	Resolution:
	    New environment variable OB2NOEJECTCLEANINGTAPE which
	    has to be set to 1 in omnirc file, was implemented in
	    order to prevent OmniBack II to unload the cleaning
	    tape.

	Id = HSLco34581
	    Enabled "st_san_safe" parameter causes incorrect
	    system handling for the devices with "rewind on close"
	    implemented. This causes devbra to return unusable
	    devices.

	Resolution:
	    devbra is adapted in order to work properly when
	    "st_san_safe" kernel parameter is enabled.

	Id = HSLco34684
	    Media Agent on AIX platform does not handle End
	    of Medium correctly for LTO devices.

	Resolution:
	    End of Medium handling is improved for LTO devices
	    on AIX platform.

	Id = HSLco34910
	    New inquiry strings are needed for Compaq devices.

	Resolution:
	    New inquiry strings are added for Compaq devices.

	Id = HSLco35035
	    In case that NDMP backup contains large number of
	    files, Backup Media Agent uses large amount of memory.

	Resolution:
	    Backup Media Agent memory usage is improved so it can
	    backup up to 5 million files.

	Id = HSLco35178
	    Sometimes it is possible that eject operation fails
	    after the medium header verification.

	Resolution:
	    Additional medium rewind operation is added before the
	    offline operation.

	Id = HSLco35450
	    Auto configuration of Overland Data Neo Series
	    LXN2000 and Neo Series LXN4000with Quantum
	    SDLT220 tape drives does not work because of
	    inquiry strings missing.

	Resolution:
	    Inquiry strings are added for auto configuration.

	Id = HSLco35670
	    Message is implying that medium verification has been
	    done although only the medium header sanity check has
	    been performed.

	Resolution:
	    Message is changed to:

	      "Medium header verification completed".

	    Part of SSPUX410_028.

	Id = HSLco35704
	    When performing bulk eject media agent aborts session.

	Resolution:
	    Ejecting tape from mailslot works properly.

	Id = HSLco36329
	    If during the backup connection between BMA and UMA
	    is broken and no IPC error is reported, BMA terminates
	    when it fails to instruct UMA to unload the tape.

	Resolution:
	    New instance of UMA is started.

	Id = HSLco36526
	    Devbra and sanconf are limited to 10 character serial
	    numbers only. When there are devices with 12 digit
	    SN detected, devbra truncates the last two digits.
	    As a result, several physical devices are then treated
	    as one and the same device.

	Resolution:
	    Devbra is using all digits of the device SN to
	    distinguish between devices.

	    Part of SSPUX410_040.

	Id = HSLco36656
	    Reading and accessing the Cell Manager info resulted
	    in xma ending abnormally.

	Resolution:
	    Source code for updating Cell Manager info has been
	    modified slightly.

	Id = HSLco35925
	    Media Agent protocol is incorrect for the devices
	    with multi-host connection.

	Resolution:
	    Media Agent protocol is improved for the devices using
	    multi-host connections.

	    Part of SSPUX41_031.

	Id = HSLco36147
	    Solaris Media Agent is not capable of handling SCSI
	    sense information bigger than 144 bytes.
	    Problem typically occurs in combination with certain
	    types of SAN FC switches/drivers.

	Resolution:
	    Buffer receiving SCSI sense information is increased.

	    Part of SSPUX410_035.

	Id = HSLco36472
	    Media Agent is not able to write beyond 2GB limitation
	    on file devices.

	Resolution:
	    The 2Gb limitation on file devices is increased.

	    Part of SSPUX410_037.

	Id = HSLco37281
	    OmniBack II does not support FC devices on
	    AIX platform.

	Resolution:
	    Support for FC devices on AIX platform is added.

	    Part of SSPUX410_038.

	Id = HSLco36985, HSLco36532
	    Ascii to Unicode conversions of large number of
	    filenames generate stack overflow while transferring
	    the catalog information.

	Resolution:
	    Function for Ascii to Unicode conversion is replaced.

	    Part of SSPUX410_042.

	Id = HSLco36901
	    In case that backup to direct access devices contains
	    large number of small files, it is possible that
	    catalog size is bigger than space available on medium.
	    Because of this backup fails to write complete catalog
	    to the medium.

	Resolution:
	    Calculation of space needed for catalog is improved in
	    order not to exceed available space.

	Id = HSLco36135
	    New values are returned by SN6000.

	Resolution:
	    New returned values for SN6000 are supported.

	Id = HSLco36960
	    OmniBack II does not work correctly with 9840 device
	    which product ID starts with "T9840".

	Resolution:
	    Media Agent is improved in order to support 9840
	    devices which product ID starts with "T9840".

	Id = JAGae28035
	    Automatic cleaning does not work if library does not
	    have barcode support.

	Resolution:
	    New OmniBack II environment variable is added:
	    OB2CLNSLOT. Variable has to be set on Media Agent host
	    and has to contain number of Cleaning slot configured
	    for the library.

	PHSS_26357:
	Id = HSLco33017
	    When split library in SAN environment is assigned to
	    2 systems and "omnimm -eject" is run on host B, host A
	    can no longer access the changer.

	Resolution:
	    Library robotic mechanism is released after tape
	    eject.

	Id = HSLco33264
	    Not all information is written to the debug.log after
	    I/O drive status error occurs.

	Resolution:
	    Information is added to the debug.log file.

	Id = HSLco33563
	    With OmniBack II A.04.00 release verification of DA
	    block part is introduced. In case that data length for
	    the data record is "0", verify reports an error.

	Resolution:
	    Verify is changed in order to ignore "0" data length
	    for data record, because this does not influence data
	    restore.

	    Part of SSPUX410_016.

	Id = HSLco33982
	    In case that STK 9940 drives are configured as T9840,
	    query does not work correctly because OB2 expects that
	    those drives are configured as type 3590.

	Resolution:
	    Configuration for STK 9940 is changed in order to be
	    recognized as T9840 media type.

	Id = HSLco34050
	    In case in which reconnect option is used for backup,
	    it is possible that Media Agent fails due to a protocol
	    error.

	Resolution:
	    Protocol between Session Manager and Media Agent is
	    changed in order not to acknowledge normal formatted
	    messages.

	    Complete functionality of this fix will be available
	    when Cell Server patch PHSS_26353/PHSS_26354 is
	    installed - or successors of it.

	    Part of SSPUX410_017.

	Id = HSLco34139
	    Header verification can not handle a dirty drive
	    situation.

	Resolution:
	    If OmniBack II detects cleaning tape medium header is
	    not checked before unloading.

	Id = HSLco34266
	    When loading a tape medium header check is run. If the
	    medium is foreign or blank OmniBack II aborts backup
	    session.

	Resolution:
	    If loaded tape is foreign or blank OmniBack II does not
	    check medium header when closing device.

	Id = NSMbb44407
	    In order for Sony DTF device to work correctly,
	    "OB2DBD=1" entry has to be added to omnirc file.

	Resolution:
	    Entry for Sony DTF drive is updated in order to make
	    the device work correctly without omnirc entry.

	PHSS_26219:
	Id = HSLco30584  SR: H555006666
	    Medium header verification is not implemeted.

	Resolution:
	    Environment variable OB2DISABLEHEADERCHECK is
	    introduced.
	    Medium header is checked by default. Setting the
	    variable to 1 in /opt/omni/.omnirc file turns the
	    functionality off.

	Id = HSLco31274
	    DAS Media Agent is checking incorrect environment
	    variable.

	Resolution:
	    Setting environment variable OB2DASDRIVESTATUS2 to 1
	    in the /opt/omni/omnirc file makes usage of more than
	    15 drives possible.

	Id = HSLco31293
	    Query operation hangs when performed on GRAU
	    libraries with more than 1000 tapes.

	Resolution:
	    Query operation can handle more than 1000 tapes
	    within GRAU library.

	Id = HSLco31696
	    LTO drives are not supported with Omniback ACS
	    integration.

	Resolution:
	    Omniback ACS integration supports LTO drives.

	Id = NSMbb44086
	    NDMP Media Agent packages do not contain devbra.

	Resolution:
	    devbra is added to NDMP Media Agent packages.

	Id = HSLco30326
	    OmniBackII A.04.10 does not support HP VS80 and
	    Benchmark VS640 libraries.

	Resolution:
	    OmniBackII A.04.10 supports HP VS80 and Benchmark VS640
	    libraries on HP-UX, Linux and Sun Solaris systems.

	    Part of SSPUX410_002.

	Id = HSLco32416
	    In case that reconnect option is used and OB2PORTRANGE
	    environment variable is set, it is possible that
	    reconnect occurs at the beginning of the session
	    due to incorrectly set timeout.

	Resolution:
	    Timeout is set to correct value.

SR:
	H555008728 H555008179 H555008747 H555008496 H555007993
	8606263710 B555014660 H555008050 H555008421 H555008610
	H555008242 H555008504 H555006734 H555008328 H555008634
	H555008608 H555008428 H555008662 H555008680 H555008834
	H555008753 H555008555 H555008655 B555013119 H555007739
	H555007700 H555007798 H555007513 H555007381 H555007663
	H555007269 B555012905 H555006885 H555006608 H555007051
	H555006798 H555006790 H555006666

Patch Files:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
		packet.Z
	/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
		A.04.10/packet.Z

what(1) Output:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ndmp/sun/sparc/solaris-7/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-1020/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/hp/s800/hp-ux-11/A.04.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/fxma/sun/sparc/solaris-26/
		A.04.10/packet.Z:
		None

cksum(1) Output:
	3331040333 2402700 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	4194833461 2403410 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	1890874992 2009416 /opt/omni/databases/vendor/ma/gpl/i386/
		linux-60/A.04.10/packet.Z
	2178067597 2118973 /opt/omni/databases/vendor/ma/ibm/rs6000/
		aix-42/A.04.10/packet.Z
	917507548 1834583 /opt/omni/databases/vendor/ma/sco/i386/
		sco_sv/A.04.10/packet.Z
	3178890692 2101773 /opt/omni/databases/vendor/ma/sequent/
		i386/dynix/A.04.10/packet.Z
	970462751 2366432 /opt/omni/databases/vendor/ma/siemens/
		r400/sinix/A.04.10/packet.Z
	1170403661 2375446 /opt/omni/databases/vendor/ma/sun/sparc/
		solaris-26/A.04.10/packet.Z
	839602636 2958719 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	869345621 2962553 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	1186847088 2952571 /opt/omni/databases/vendor/acs/sun/sparc/
		solaris-26/A.04.10/packet.Z
	1762638940 2649705 /opt/omni/databases/vendor/acs/ibm/
		rs6000/aix-42/A.04.10/packet.Z
	2365258869 2515371 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	4115898237 2515269 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	3268227315 2504000 /opt/omni/databases/vendor/das/ibm/
		rs6000/aix-42/A.04.10/packet.Z
	1210383737 2847365 /opt/omni/databases/vendor/ndmp/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	2567739723 2846199 /opt/omni/databases/vendor/ndmp/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	3864125759 2733961 /opt/omni/databases/vendor/ndmp/sun/
		sparc/solaris-7/A.04.10/packet.Z
	3059525696 2830651 /opt/omni/databases/vendor/fxma/hp/s800/
		hp-ux-1020/A.04.10/packet.Z
	1175623523 2831147 /opt/omni/databases/vendor/fxma/hp/s800/
		hp-ux-11/A.04.10/packet.Z
	171744872 2703325 /opt/omni/databases/vendor/fxma/sun/sparc/
		solaris-26/A.04.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	If any newer SSP for the Media Agent is installed
	on your system, you must re-apply the SSP after
	installing this Media Agent patch.

	If the Cell Server is running on HP-UX, then the
	Cell Server patch PHSS_27454/PHSS_27455 for HP-UX
	must be installed before this Media Agent patch.
	If this is not done, the connection between Media
	Agents and Cell Server will no longer work.

	In a mixed environment, if the Cell Server is running
	on Windows NT/2000, then Cell Server patch
	OMNIBACK_00061 must be installed at the same time.

	PHSS_27602:
	Release Date: Late December 2002
	Id = HSLco36656  SR: H555008680
	PHSS_27602 is required for this defect fix.

	PHSS_27587:
	Release Date: Late November 2002
	Id = HSLco36526  SR: B555014660
	PHSS_27587 is required for this defect fix.

	PHSS_27454:
	Release Date: Available
	Id = HSLco35035  SR:H555008242
	PHSS_27454 is required for this defect fix.

	PHSS_26353:
	Release Date: Available
	Id = HSLco34050  SR:H555007700
	PHSS_26353 is required for this defect fix.

Supersedes:
	PHSS_26219 PHSS_26357

Equivalent Patches:
	PHSS_27459:
	s700: 11.00 11.11 11.20
	s800: 11.00 11.11 11.20

Patch Package Size: 52300 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_27458

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_27458.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_27458.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_27458.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_27458.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_27458:
	NOTE!
	This Patch has to be installed on the Installation
	Server host.

	The OB2 Media Agent must be redistributed to the Media
	Agent client system(s) after the installation of the patch
	in order to get the fixes into effect.

	For distribution of the Media Agent, refer to the
	OmniBackII Installation guide.


	Patch includes the following Site Specific Patches:
	   SSPUX410_002
	   SSPUX410_016
	   SSPUX410_017
	   SSPUX410_028
	   SSPUX410_031
	   SSPUX410_035
	   SSPUX410_037
	   SSPUX410_038
	   SSPUX410_040
	   SSPUX410_042