Patch Name: PHSS_26881

Patch Description: s700_800 10.X OV OB3.50 patch - MA packet

Creation Date: 02/09/09

Post Date:  02/09/17

Hardware Platforms - OS Releases:
	s700: 10.00 10.01 10.10 10.20
	s800: 10.00 10.01 10.10 10.20

Products:
	OmniBackII A.03.50

Filesets:
	OMNIBACK-II.OMNI-ACS-P,A.03.50
	OMNIBACK-II.OMNI-DAS-P,A.03.50
	OMNIBACK-II.OMNI-HPUX-P,A.03.50
	OMNIBACK-II.OMNI-OTHUX-P,A.03.50

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_26881

Symptoms:
	PHSS_26881:
	Id = HSLco30962  SR:H555006734
	    When testing the drive cleaning configuration
	    using OmniBack II dirty drive simulation method
	    on DDS4 autoloader DAT40x6i/e the tape
	    unload fails with the following error message:

	      ":[12:5]  Internal error in
	       ("/src/ma/pol/polmax.c /main/r31_split/3":565)
	        => process aborted
	        This is an unexpected condition and is likely
	        due to a combination of circumstances involving
	        both this product  and the operating system.
	        Report this error to your post-sales OmniBack II
	        Support Representative."

	Id = HSLco33982  SR:H555007663
	    ACSLS query fails for STK 9940 media.

	Id = HSLco34139  SR:H555007739
	    After OmniBack II detects dirty drive and loads a
	    cleaning tape, option for medium header check aborts
	    the backup session.

	Id = HSLco34266  SR:H555007798
	    Medium header check can cause session to abort if
	    non-OmniBack II tapes are detected. When this behavior
	    occurs, messages similar to the following will be
	    displayed:

	      "[Warning] From: BSM@<host> "<datalist>" Time:<time>
	        "tar" medium in device "<drive>".
	        The medium will not be used for backup.
	       [Minor] From: BMA@<host> "<drive>" Time:<time>
	        [90:190] Invalid format version of OmniBack II
	        medium.
	       [Normal] From: BMA@<host> "<drive>" Time:<time>
	        ABORTED Media Agent "<drive>"
	       [Critical] From: BSM@<host> "<datalist>" Time:<time>
	        None of the Disk Agents completed successfully.
	        Session has failed."

	Id = HSLco35178  SR:H555008328
	    Backup fails with error:

	      "[90:135]  Can not eject medium. ([5] I/O error)"

	Id = HSLco35670  SR:H555008496
	    The following message is displayed after successfully
	    completed medium header sanity check:

	      "Medium verification completed, 0 errors found"

	PHSS_25960:
	Id = HSLco30584  SR:H555006666
	    Omniback does not check if the medium is corrupted
	    at the end of the backup.

	Id = HSLco31293  SR:H555006798
	    Querying GRAU libraries hangs.

	Id = HSLco31403  SR:H555006826
	    Tape is not marked poor after an append fails.

	Id = HSLco31696  SR:H555006885
	    ACS Media Agent does not recognize LTO drives.

	Id = JAGad97976  SR:8606228923
	    OmniBack II does not recognize Compaq DLT library.

	Id = HSLco29436  SR:H555006362
	    Media import sometimes fails due to I/O errors.

	Id = HSLco30326  SR:H555006608
	    OmniBackII A.03.50 does not support HP VS80 and
	    Benchmark VS640 libraries.

	PHSS_24427:
	Id = HSLco27114, NSMex04434
	    Cleaning signal is not detected.

	Id = NSMbb40166
	    At the end of backup, multiple "STATING Media Agent"
	    messages appeared.

	Id = NSMbb40213
	    Backup to ACSLS Library fails with an error:

	    "Cannot lock the drive "1,20,0,0"
	    STATUS_LOCK_FAILED"

	Id = NSMex03944
	    The debug.log on Media Agent system fills up in
	    case of a bad drive

	Id = NSMex03967
	    Barcode scan of library connected to SAN fails.

	Id = NSMex04021
	    OmniBack II does not correctly recognize that a drive
	    needs cleaning.

	Id = NSMex04040
	    Media Agent debug.log file is filled during backup with
	    error messages:

	    "SCTL_io: ioctl(fd=8, SCTL_IOCTL, cmd) failed.
	     cdb_length=6, {errno=22} dump:"

	Id = NSMex04115
	    The message "Tape Alert [32]: Undefined TapeAlert flag."
	    appears.

	Id = NSMex04252
	    UMA fails if "-tty" option is used.

	Id = NSMex04390
	    "TapeAnalyser" fails to work with "Ultrium 1-SCSI"
	    drive.

	Id = NSMex04507
	    Devbra shows that  Ultrium is not supported.

	Id = NSMex04534
	    Ultrium configuration fails on Sun Solaris.

	Id = JAGab70162
	    Media Agent does not exist for Linux clients.

	PHSS_22373:
	Id = JAGad15060
	    Backup fails with an error:

	      "Cannot unload the drive "0,0,2,3"
	       STATUS_LOCKID_NOT_FOUND"

	Id = NSMbb36866
	    Importing OmniBack II A.02.55 media with omnistream
	    objects to any later version of OmniBack II corrupts
	    the Monitor GUI.

	Id = NSMex03031
	    Restoring OmniStorage objects fails with an error:

	      "Can not backspace block ([5] I/O error)".

	Id = NSMex03297
	    SCSI-II Library does not work on Sun Solaris platform.

	Id = NSMex03391
	    Backup to DLT8000 drive fails with an error:

	      "Can not open device, errno 6.".

	Id = NSMex03613
	    Backup to MO media fails with an error:

	      "Medium has no capacity.".

	Id = HSLco21988  SR: H555003458
	    OmniBack II ACS Integration is not supported on Sun
	    Solaris operating system.

	Id = HSLco22425  SR: H555003545
	    OmniBack II ACS Integration is not supported on IBM
	    AIX operating system.

	Id = NSMex03519
	    Restore to a NetWare Novell system hangs.

	Id = NSMex02763
	    SCSI Library cannot unload DLT tape cartridge after
	    the tape rewind.

	Id = NSMex02816
	    Device intermittently report an I/O error and the tape
	    gets stuck in the drive.

	Id = NSMex03792
	    STK9840 and DLT8000 configuration fail on Sun Solaris.

	Id = NSMex03734, NSMex03897
	    Blank tapes are causing duplicates in the Media
	    Management database.

Defect Description:
	PHSS_26881:
	Id = HSLco30962
	    DDS4 automatically unloads the tape. OmniBack II tries
	    to unload but fails since the device already unloaded
	    tape.

	Resolution:
	    New environment variable OB2NOEJECTCLEANINGTAPE which
	    has to be set to 1 in omnirc file, was implemented in
	    order to prevent OmniBack II to unload the cleaning
	    tape.

	Id = HSLco33982
	    In case that STK 9940 drives are configured as T9840,
	    query does not work correctly because OB2 expects that
	    those drives are configured as type 3590.

	Resolution:
	    Configuration for STK 9940 is changed in order to be
	    recognized as T9840 media type.

	Id = HSLco34139
	    Header verification can not handle a dirty drive
	    situation.

	Resolution:
	    If OmniBack II detects cleaning tape medium header is
	    not checked before unloading.

	    Part of SSPUX350_075.

	Id = HSLco34266
	    If 'InitOnLoosePolicy' is set to 0 and foreign tape
	    is loaded OmniBack II aborts backup session instead
	    of issuing a mount request.
	    When loading a tape medium header check is run. If the
	    medium is foreign or blank OmniBack II aborts backup
	    session.

	Resolution:
	    If loaded tape is foreign or blank OmniBack II does not
	    check medium header when closing device.

	Id = HSLco35178
	    Sometimes it is possible that eject operation fails
	    after the medium header verification.

	Resolution:
	    Additional medium rewind operation is added before the
	    offline operation.

	Id = HSLco35670
	    Message is implying that medium verification has been
	    done although only the medium header sanity check has
	    been performed.

	Resolution:
	    Message has been changed to:

	     "Medium header verification completed, 0 errors found."

	PHSS_25960:
	Id = HSLco30584
	    Medium header verification is not implemented.

	Resolution:
	    Environment variable OB2DISABLEHEADERCHECK is
	    introduced.
	    Medium header is checked by default. Setting the
	    variable to 1 in /opt/omni/.omnirc file turns the
	    functionality off.

	    Part of SSPUX350_061 and SSPUX350_068.

	Id = HSLco31293
	    Query operation hangs when performed on GRAU
	    libraries with more than 1000 tapes.

	Resolution:
	    Query operation can handle more than 1000 tapes
	    within GRAU library.

	Id = HSLco31403
	    If append fails during positioning, the tape is not
	    marked poor.

	Resolution:
	    Error handling is improved.

	    Part of SSPUX350_064.


	Id = HSLco31696
	    LTO drives are not supported with Omniback ACS
	    integration.

	Resolution:
	    Omniback ACS integration supports LTO drives.

	    Part of SSPUX350_067.


	Id = JAGad97976
	    Compaq DLT library is not added to device list.

	Resolution:
	    Compaq DLT device is added to device list.

	    Please see Special Installation Instructions.

	Id = HSLco29436
	    Media import uses a lot of search operations in
	    order to achieve better performance. In case of
	    bad quality of drives or tapes, it sometimes fails
	    with an I/O error.

	Resolution:
	    New OB2 environment variable is introduced:
	    OB2NOSEEKIMPORT.

	    If this variable is set to 1, Media Agent will read
	    through the complete tape and it will not use any
	    search operations.

	    This option reduces the chances of experiencing
	    I/O errors during media import, but its performance
	    is 3-4 times slower.

	    If OB2NOSEEKIMPORT is set and the tape contains
	    the "OB-crc" field, not only the tape is verified but
	    also the "OB-crc". Since a copied tape (omnimcopy)
	    will contain "OB-crc" field as well if the source tape
	    did contain "OB-crc" fields, importing such a tape
	    will also be "OB-crc" checked.

	    Part of SSPUX350_050.

	Id = HSLco30326
	    OmniBackII A.03.50 does not support HP VS80 and
	    Benchmark VS640 libraries.

	Resolution:
	    OmniBackII A.03.50 supports HP VS80 and Benchmark VS640
	    libraries on HP-UX, Linux and Sun Solairs systems.

	    Please see Special Installation Instructions.

	PHSS_24427:
	Id = HSLco27114, NSMex04434
	    Cleaning signal is incorrectly intercepted because of
	    two REQUEST SENSE.

	Resolution:
	    REQUEST SENSE is reduced from two to one.

	Id = NSMbb40166
	    If Media Agent is unable to unload the drive from a
	    STK library, Utility Media Agent (UMA) improperly
	    finishes and is restarted for 10 times.

	Resolution:
	    UMA properly finishes its actions in case of problems
	    with STK Library.

	Id = NSMbb40213
	    In OmniBack II - ACSLS environment it is possible
	    that a device is temporarily in use. Because of this
	    OmniBack II is not able to lock the drive and the
	    session is aborted.

	Resolution:
	    OmniBack II environment variables OB2STKRETRY and
	    OB2STKSLEEP are used in order to retry the drive
	    lock operation. Default values for the variables
	    are 40 retries and 5 seconds.

	    Part of SSPUX350_034.

	Id = NSMex03944
	    Media Agent runs into a loop and fills the debug.log
	    with error message if drive is bad.

	Resolution:
	    Loop is removed and exchanged with five
	    re-tries.

	Id = NSMex03967
	    Incorrect device name is used for barcode scan
	    operation if a library is connected to SAN.

	Resolution:
	    Correct device name is used for barcode scanning.

	Id = NSMex04021
	    OmniBack II does not check TapeAlert report
	    correctly, so it is not able to recognize that
	    drive needs cleaning.

	Resolution:
	    Media Agent is changed in order to check TapeAlert
	    report correctly.

	Id = NSMex04040
	    If "tape2" driver is used for tape control, "SIOC_IO"
	    fails with error "Invalid argument(22)".This is always
	    logged to debug.log file on Media Agent machine.

	Resolution:
	    New OB2 variable is introduced: OB2DEBUGLOGENTRY.
	    If this variable is set to "0", errors will not be
	    logged into debug.log file.

	Id = NSMex04115
	    Tape alert flag 32 for the picker is incorrectly
	    decoded.

	Resolution:
	    New message is added to the message catalog.

	Id = NSMex04252
	    If "-tty" option is used OB II is trying to close not
	    existing file descriptor.

	Resolution:
	    UMA is improved in order to check if file descriptor is
	    valid before closing.

	    Part of SSPUX350_036.

	Id = NSMex04390
	    TapeAnalyser does not work correctly with some new
	    device types.

	Resolution:
	    TapeAnalyser is improved in order to work correctly
	    with new device types.

	Id = NSMex04507
	    The device Ultrium is not supported.

	Resolution:
	    The device Ultrium is added to support list.

	    Please see Special Installation Instructions.

	    Part of SSPUX350_044

	Id = NSMex04534
	    Ultrium is not correctly recognized during the
	    configuration on Sun Solaris system.

	Resolution:
	    Configuration of Ultrium on Sun Solaris is improved.

	    Please see Special Installation Instructions.

	Id = JAGab70162
	    Media Agent does not exist for Linux clients.

	Resolution:
	    Media Agent for Linux clients is added.

	PHSS_22373:
	Id = JAGad15060
	    If any media management operation (scan or init, for
	    example) is started during a backup to STK Silo
	    Library, Media Management Agent fails and unlocks the
	    drive. When the backup is finished, Backup Media Agent
	    tries to unlock drive and fails as it is already
	    unlocked by Media Management Agent.

	Resolution:
	    Media Management Agent does not unlock the drive that
	    it failed to lock.

	Id = NSMbb36866
	    Incorrect conversion of object's backup type from
	    OmniBack II A.02.55 tape format causes GUI to display
	    senseless messages in "Backup type" field.

	Resolution:
	    Conversion of OmniBack II A.02.55 tape format improved.

	Id = NSMex03031
	    Incorrect positioning to a requested block position
	    causes restore failure.

	Resolution:
	    Repositioning is implemented in Restore Media Agent.

	Id = NSMex03297
	    sst driver does not work on 64-bit Sun Solaris system.

	Resolution:
	    New sst driver sst.64 is added to package.

	Id = NSMex03391
	    Backup to DLT8000 drives that are connected to HP-UX
	    systems class higher than L fails with an error:

	      "Can not open device, errno 6.".

	Resolution:
	    The problem can be solved by specifying environment
	    variable OB2DEVSLEEP in /opt/omni/.omnirc file as
	    follows:

	      OB2DEVSLEEP=<number of seconds>

	    where <number of seconds> value is between 5 and 20.

	Id = NSMex03613
	    OmniBack fails to calculate MO medium capacity for
	    MO devices connected to a HP-UX system with "HPPB" bus.

	Resolution:
	    Capacity calculating improved.

	Id = HSLco21988
	    OmniBack II ACS Integration is not supported on Sun
	    Solaris operating system.

	Resolution:
	    OmniBack II ACS Integration is supported on Sun
	    Solaris operating system.

	Id = HSLco22425
	    OmniBack II ACS Integration is not supported on IBM
	    AIX operating system.

	Resolution:
	    OmniBack II ACS Integration is supported on IBM AIX
	    operating system.

	Id = NSMex03519
	    Prior to closing connection to a Novell NetWare Media
	    Agent client the connection is flipped to asynchronous
	    mode which causes restore to hang.

	Resolution:
	    Setting the environment variable OB2ASYNCHCLOSE to 1
	    assures connection hang not to happen.

	Id = NSMex02763
	    SCSI Library can not unload DLT tape cartridge after
	    the tape rewind in case previous offline operation
	    failed.

	Resolution:
	    Media Agent now checks the offline operation exit
	    status before unloading the medium.

	Id = NSMex02816
	    If a rewind or offline operation fails after an I/O
	    error, the tape will get stuck in the drive.

	Resolution:
	    With setting OB2REWINDRETRY and OB2REWINDSLEEP
	    variables in the .omnirc file on the Media Agent host,
	    the rewind/offline will retry if it fails.

	Id = NSMex03792
	    STK9840 and DLT8000 are not correctly recognized during
	    the configuration on Sun Solaris system.

	Resolution:
	    STK9840 and DLT8000 can be properly configured on Sun
	    Solaris systems using OmniBack II 3.50.

	    Please see Special Installation Instructions.

	Id = NSMex03734, NSMex03897
	    If Media Agent is unable to read Medium Header ID,
	    it report new Medium ID which causes duplicates to
	    appear in the Media Management database.

	Resolution:
	    If Media Agent is unable to read Medium Header ID
	    then the buffer for ID is reset to 0.

SR:
	H555007739 H555008496 H555007798 H555003545 H555006734
	H555003458 H555008328 H555007663 H555006362 H555006885
	H555006608 H555006826 H555006798 8606228923 H555006666
	H555006003 H555005004 H555004450 H555006044 H555005353
	H555004912 H555004932 H555005385 H555005592 H555005836
	H555004864 H555005766 8606145724 H555004009 H555003757

Patch Files:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-10/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/sun/sparc/solaris/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.03.50/
		require.dat
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-10/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-10/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.03.50/
		require.dat
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.03.50/
		packet.Z
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.03.50/
		require.dat

what(1) Output:
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-10/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/hp/s800/hp-ux-11/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/ibm/rs6000/aix-42/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sco/i386/sco_sv/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sequent/i386/dynix/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/siemens/r400/sinix/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sun/sparc/solaris/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/sun/sparc/solaris-26/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/ma/gpl/i386/linux-60/A.03.50/
		require.dat:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-10/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/hp/s800/hp-ux-11/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/das/ibm/rs6000/aix-42/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-10/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/hp/s800/hp-ux-11/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/ibm/rs6000/aix-42/A.03.50/
		require.dat:
		None
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.03.50/
		packet.Z:
		None
	/opt/omni/databases/vendor/acs/sun/sparc/solaris-26/A.03.50/
		require.dat:
		None

cksum(1) Output:
	2747027504 1830845 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-10/A.03.50/packet.Z
	2688765935 1832767 /opt/omni/databases/vendor/ma/hp/s800/
		hp-ux-11/A.03.50/packet.Z
	2507107250 1535599 /opt/omni/databases/vendor/ma/ibm/rs6000/
		aix-42/A.03.50/packet.Z
	1610153556 1352147 /opt/omni/databases/vendor/ma/sco/i386/
		sco_sv/A.03.50/packet.Z
	493983269 1566297 /opt/omni/databases/vendor/ma/sequent/
		i386/dynix/A.03.50/packet.Z
	577297466 1845668 /opt/omni/databases/vendor/ma/siemens/
		r400/sinix/A.03.50/packet.Z
	63524380 1806205 /opt/omni/databases/vendor/ma/sun/sparc/
		solaris/A.03.50/packet.Z
	3679007713 1848482 /opt/omni/databases/vendor/ma/sun/sparc/
		solaris-26/A.03.50/packet.Z
	1591304978 2791149 /opt/omni/databases/vendor/ma/gpl/i386/
		linux-60/A.03.50/packet.Z
	1638117624 17 /opt/omni/databases/vendor/ma/gpl/i386/
		linux-60/A.03.50/require.dat
	1894046579 1901975 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-10/A.03.50/packet.Z
	1874723423 1901119 /opt/omni/databases/vendor/das/hp/s800/
		hp-ux-11/A.03.50/packet.Z
	379433704 1898105 /opt/omni/databases/vendor/das/ibm/rs6000/
		aix-42/A.03.50/packet.Z
	2000375657 2331211 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-10/A.03.50/packet.Z
	3641265121 2336513 /opt/omni/databases/vendor/acs/hp/s800/
		hp-ux-11/A.03.50/packet.Z
	853675906 1880707 /opt/omni/databases/vendor/acs/ibm/rs6000/
		aix-42/A.03.50/packet.Z
	3219547934 17 /opt/omni/databases/vendor/acs/ibm/rs6000/
		aix-42/A.03.50/require.dat
	1470853893 2155659 /opt/omni/databases/vendor/acs/sun/sparc/
		solaris-26/A.03.50/packet.Z
	3716607339 18 /opt/omni/databases/vendor/acs/sun/sparc/
		solaris-26/A.03.50/require.dat

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	PHSS_25819:
	Release date:Available
	Id = HSLco21988 SR:H555003458
	PHSS_25819 is required for this defect fix.
	Id = HSLco22425 SR:H555003545
	PHSS_25819 is required for this defect fix.

Supersedes:
	PHSS_22373 PHSS_24427 PHSS_25960

Equivalent Patches:
	PHSS_26882:
	s700: 11.00 11.11 11.20
	s800: 11.00 11.11 11.20

Patch Package Size: 30180 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_26881

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_26881.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_26881.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_26881.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_26881.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_26881:
	NOTE!
	This Patch has to be installed on the Installation
	Server host.

	The OB2 Media Agent must be redistributed to the Media
	Agent client system(s) after the installation of the patch
	in order to get the fixes into effect.

	For distribution of the Media Agent, refer to the
	OmniBackII Installation guide.


	NOTE!
	For connecting of LTO Ultrium, Benchmark DLT1 and
	SuperDLT modify "st.conf" file:

	tape-config-list=
	    "HP   Ultrium 1-SCSI", "HP Ultrium", "ULTRIUM",
	          "BNCHMARKDLT1", "Benchmark DLT1", "DLT1",
	          "QUANTUM SuperDLT1", "QUANTUM SuperDLT", "SDLT";

	ULTRIUM =  1,0x3b,0,0xd639,4,0x00,0x00,0x00,0x40,3;
	DLT1    =  1,0x3a,0,0x8639,4,0x40,0x86,0x87,0x89,3;
	SDLT    =  1,0x79,0,0x8639,4,0x90,0x91,0x90,0x91,3;


	For ULTRIUM number "0x3b" can be replaced with "0x7a".
	For Benchmark DLT1 number "0x3a" can be replaced
	with "0x38" or "0x77".

	The latest st (scsi tape) driver patch for Solaris must be
	installed on the system:

	    Solaris 6 Patch-ID# 105847-09 or later
	    Solaris 7 Patch-ID# 107460-10 or later
	    Solaris 8 Patch-ID# 108725-05 or later


	NOTE!
	For connecting of DLT8000 and STK9840, install following
	(or later) SCSI Tape Driver (ST) patches:

	 Solaris 6 : 105847-08
	 Solaris 7 : 107460-08
	 Solaris 8 : 108725-04

	In case that there is a Solaris 6 system with Media
	Agent and a DLT8000 connected to it, then add the
	following lines to the "tape-config-list" section of the
	/kernel/drv/st.conf file:

	tape-config-list=

	    "QUANTUM DLT8000",   "Quantum DLT8000",   "DLT8k-data",

	DLT8k-data = 1,0x38,0,0x1D639,4,0x84, 0x85, 0x88, 0x89, 3;

	For Solaris 7 and 8 no additional action is needed after
	the mentioned patches are installed.


	Patch includes the following Site Specific Patches:
	    SSPUX350_034
	    SSPUX350_036
	    SSPUX350_044
	    SSPUX350_050
	    SSPUX350_061
	    SSPUX350_064
	    SSPUX350_067
	    SSPUX350_068
	    SSPUX350_075