Patch Name: PHSS_25988 Patch Description: s700_800 10.20 OV SAPSPI7.X Monitor bin.s A.07.23 Creation Date: 02/01/16 Post Date: 02/01/22 Hardware Platforms - OS Releases: s700: 10.20 s800: 10.20 Products: OpenView Smart PlugIn for SAP 7.1 Filesets: SPI-SAP-ITO.SAPSPI-SOL,A.07.10 SPI-SAP-ITO.SAPSPI-AIX,A.07.10 SPI-SAP-ITO.SAPSPI-HP-UX,A.07.10 SPI-SAP-ITO.SAPSPI-WINNT,A.07.10 SPI-SAP-ITO.SAPSPI-TRA,A.07.10 Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHSS_25988 Symptoms: PHSS_25988: - r3moncol coredumps on all supported platforms under certain configurations - importing A.07.22 transports into SAP 31I system does not work correctly Defect Description: PHSS_25988: - r3moncol coredumps with certain configurations. There are some combinations of messages that make r3moncol coredump. In SAP there is a SAP SPI table containing the actual message and a table containing message details. r3moncol assumes that for each message there are also message details and tries to read the message details table. But sometimes this is not the case. => r3moncol accesses a non-initialized pointer to a non-existent table entry. => coredump. - Function Module SAPLZSPB, Program LZSPB$18 The field "ZHPSPI30" is unknown, but there are the following fields with similar names: "ZHPSPI05", "ZHPSPI06A" and "ZHPSPI08L". This is the error during the transport. Resolution: - since the information in the details table is not used anymore,the function call to read the message details was removed. - Built delta transport which fixes this error. This transport is dependent on the A.07.22 transport. THIS TRANSPORT IS FOR SAP 31 ONLY!!! SR: B555012978 B555012858 Patch Files: /opt/hpitosap/install/C/EXECUTABLES/ibm/rs6000/aix/monitor/ r3moncol32.Z /opt/hpitosap/install/C/EXECUTABLES/ibm/rs6000/aix/monitor/ r3moncol64.Z /opt/hpitosap/install/C/EXECUTABLES/hp/s700/hp-ux10/monitor/ r3moncol.Z /opt/hpitosap/install/C/EXECUTABLES/hp/pa-risc/hp-ux11/ monitor/r3moncol32.Z /opt/hpitosap/install/C/EXECUTABLES/hp/pa-risc/hp-ux11/ monitor/r3moncol64.Z /opt/hpitosap/install/C/EXECUTABLES/sun/sparc/solaris/ monitor/r3moncol32.Z /opt/hpitosap/install/C/EXECUTABLES/sun/sparc/solaris/ monitor/r3moncol64.Z /opt/hpitosap/install/C/EXECUTABLES/ms/intel/nt/monitor/ r3moncol.exe /opt/hpitosap/install/C/EXECUTABLES/ms/intel/nt/monitor/ OvSpiASER3.dll /opt/hpitosap/trans/R3Trans.7.23.tar what(1) Output: /opt/hpitosap/install/C/EXECUTABLES/sun/sparc/solaris/ monitor/r3moncol32.Z: None /opt/hpitosap/install/C/EXECUTABLES/sun/sparc/solaris/ monitor/r3moncol64.Z: None /opt/hpitosap/install/C/EXECUTABLES/ibm/rs6000/aix/monitor/ r3moncol32.Z: None /opt/hpitosap/install/C/EXECUTABLES/ibm/rs6000/aix/monitor/ r3moncol64.Z: None /opt/hpitosap/install/C/EXECUTABLES/hp/s700/hp-ux10/monitor/ r3moncol.Z: None /opt/hpitosap/install/C/EXECUTABLES/hp/pa-risc/hp-ux11/ monitor/r3moncol32.Z: None /opt/hpitosap/install/C/EXECUTABLES/hp/pa-risc/hp-ux11/ monitor/r3moncol64.Z: None /opt/hpitosap/install/C/EXECUTABLES/ms/intel/nt/monitor/ r3moncol.exe: OvCTrace.h 0.27 (05 Jun 2000) Utilities OvMFCCString.h 0.11 (24 Feb 2000) Utilities /opt/hpitosap/install/C/EXECUTABLES/ms/intel/nt/monitor/ OvSpiASER3.dll: OvCTrace.h 0.27 (05 Jun 2000) Utilities OvMFCCString.h 0.11 (24 Feb 2000) Utilities /opt/hpitosap/trans/R3Trans.7.23.tar: None cksum(1) Output: 2636532024 1032347 /opt/hpitosap/install/C/EXECUTABLES/sun/ sparc/solaris/monitor/r3moncol32.Z 1226709311 1405741 /opt/hpitosap/install/C/EXECUTABLES/sun/ sparc/solaris/monitor/r3moncol64.Z 3289931806 939097 /opt/hpitosap/install/C/EXECUTABLES/ibm/ rs6000/aix/monitor/r3moncol32.Z 1342684360 989519 /opt/hpitosap/install/C/EXECUTABLES/ibm/ rs6000/aix/monitor/r3moncol64.Z 2088059672 1184977 /opt/hpitosap/install/C/EXECUTABLES/hp/ s700/hp-ux10/monitor/r3moncol.Z 2221868074 1212645 /opt/hpitosap/install/C/EXECUTABLES/hp/ pa-risc/hp-ux11/monitor/r3moncol32.Z 3156170396 1543599 /opt/hpitosap/install/C/EXECUTABLES/hp/ pa-risc/hp-ux11/monitor/r3moncol64.Z 3658298953 73728 /opt/hpitosap/install/C/EXECUTABLES/ms/ intel/nt/monitor/r3moncol.exe 997714394 139264 /opt/hpitosap/install/C/EXECUTABLES/ms/ intel/nt/monitor/OvSpiASER3.dll 3566547879 2201600 /opt/hpitosap/trans/R3Trans.7.23.tar Patch Conflicts: None Patch Dependencies: s700: 10.20: PHSS_25219 s800: 10.20: PHSS_25219 Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: ITOSOL_00134: sparcSOL: 2.6 2.7 2.8 PHSS_25989: s700: 11.00 s800: 11.00 Patch Package Size: 10540 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHSS_25988 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHSS_25988.depot By default swinstall will archive the original software in /var/adm/sw/patch/PHSS_25988. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. WARNING: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHSS_25988.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHSS_25988.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: Install the patch on the management server using SD. HOW TO INSTALL THE NEW BINARIES ON THE MANAGED NODES: 1) execute the following commands: cd /opt/hpitosap/install ./r3itoins r3itoins propmts you with "Do you want to upload the SAPSPI VPO UI integration (opccfgupld)? " Answer with n The patched binaries will be uploaded into the ITO distribution directory. 2) Redistribute ONLY the monitors to the managed node with the "Force Update" option enabeled. NOTE: Steps 2 & 3 are required ALSO after REMOVING the patch to put back the original binaries into the ITO distribution directories and to the managed nodes. 3) To import the transports refer to p. 67 in the Admin Ref Guide. Use the option U26 to import the transports unconditionally. To use the A.07.23 transports it is absolutely required to have the A.07.22 imported properly.