Patch Name: PHSS_22693

Patch Description: s700_800 10.20 OV ITO6.0X Intermediate Server Patch A.06.02

Creation Date: 00/11/17

Post Date:  00/11/23

Repost: 01/04/05
	Superseding patch PHSS_22761 introduces behavior that can
	cause communication failures in firewall environments for
	VPO's communications that need to go through the firewall.
	This is the result of source (client) port restrictions
	being ignored.  Observe that destination (server) port
	restrictions are correctly handled.  PHSS_22693 does not
	exhibit this same problem and is being re-released until
	replacement patch PHSS_23603 becomes available.  PHSS_23603
	is expected to be released by April 13, 2001.

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	OpenView IT/Operations 6.0

Filesets:
	OVOPC-ORA.OVOPC-UX-ORAA

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_22693

Symptoms:
	PHSS_22693:
	- Problems during bulk transfer: The ovoareqsdr process
	  dies when transferring a file upon request of opctranm.

Defect Description:
	PHSS_22693:
	check the list of the symptoms
	Resolution:
	check the list of the symptoms

SR:
	B555008884

Patch Files:
	/opt/OV/bin/OpC/ovoareqsdr

what(1) Output:
	/opt/OV/bin/OpC/ovoareqsdr:
		HP OpenView VantagePoint A.06.02 PHSS_22693 (11/17/0
			0)

cksum(1) Output:
	2304386973 184862 /opt/OV/bin/OpC/ovoareqsdr

Patch Conflicts: None

Patch Dependencies:
	s700: 10.20: PHSS_22014
	s800: 10.20: PHSS_22014

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHSS_22694:
	s700: 11.00
	s800: 11.00

Patch Package Size: 240 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_22693

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_22693.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_22693.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_22693.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_22693.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	BEFORE LOADING THIS PATCH...

	    o You may use this patch with the following patched
	      VPO release: A.06.01
	      (which is VPO A.06.00 with phss_22014 or phss_22015)

	    o DO NOT use this patch with older releases of VPO,
	      for example versions A.04.X or A.05.X
	      Do not use it with an unpatched VPO A.06.00 system.

	(A) Patch Installation Instructions
	    -------------------------------
	(A1)  Stop all VPO processes on your Management Server;
	      this includes manager processes, communication
	      processes and user-interface processes on the
	      machine.

	       - Stop all the VPO GUIs that are running, by using
	         the "File:Exit"  menubar item

	       - If you are running VPO in a MC/ServiceGuard
	         installation, put the VPO MC/SG package into
	         maintenance mode:

	         # touch /tmp/maint_NNM

	       - Stop the VPO Manager processes:

	         # ovstop opc ovoacomm

	         If any VPO process is still running, kill it
		 manually:

		 # kill -9 <pid-of-orphaned-process>


	      If you are running VPO in a MC/ServiceGuard
	      installation:

	       - Apply this patch to all MC/SG cluster nodes

	(A2)  Install the patch, following the standard installation
	      instructions (see above).

	(A3)  After installing PHSS_22693, restart the VPO processes
	      on your Management Server system:

	       - Restart the VPO Manager processes, and check that
	         the processes are running:

	         # /opt/OV/bin/OpC/opcsv -start
	         # /opt/OV/bin/OpC/opcsv -status

	       - If you are running VPO in a MC/ServiceGuard
	         installation, remove the maintenance mode flag:

	         # rm /tmp/maint_NNM

	(B) Patch Deinstallation Instructions
	    ---------------------------------
	(B1)  To deinstall the patch PHSS_22693 run swremove:

	      NOTE: Before removing the patch, stop all
		    VPO server processes, as described in
		    the Patch Installation Instructions (A1).

	      # swremove PHSS_22693