Patch Name: PHSS_21734

Patch Description: s700_800 10.X OV OB3.10 patch - SSEA packet

Creation Date: 00/06/06

Post Date:  00/07/06

Hardware Platforms - OS Releases:
	s700: 10.00 10.01 10.10 10.20
	s800: 10.00 10.01 10.10 10.20

Products:
	OmniBackII A.03.10

Filesets:
	OMNIBACK-II.OMNI-CORE-IS

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_21734

Symptoms:
	PHSS_21734:
	Id = NSMex03058
	    Raw disk backup on SSE XP256 BC/1 Configuration fails
	    with the error message:

	      "Internal error: Unknown option -bc1".

	PHSS_19525:
	Id = HSLco16368
	    HP SureStoreE Disk Array XP256 is not supported by
	    OmniBack II to perform a split mirror backup. This
	    patch does not fix any other problem.

Defect Description:
	PHSS_21734:
	Id = NSMex03058
	    The option '-bc1' is not recognized by the SSEA agent.

	Resolution:
	    The SSEA agent has been improved to recognize the
	    '-bc1' option, which results in starting a backup
	    of disk pairs.

	PHSS_19525:
	Id = HSLco16368
	    Currently OmniBack II only supports the Split Mirror
	    Backup concept with EMC Symmetrix. After the
	    introduction of the new HP SureStoreE Disk Array
	    XP256, it was requested that OmniBack II also
	    supports this disk array with the split mirror backup
	    concept.  This requires to support Oracle 8.0.x and
	    SAP R/3 in this concept as well. In addition a new
	    manual is needed.

	Resolution:
	    The SureStoreE Agent (SSEA) was developed for
	    HP-UX to control the SureStoreE disk array.
	    The Backup Session Manager, INET on HP-UX,
	    and the NT GUI were enhanced and in addition
	    Oracle 8.0.x and SAP integrations are
	    supported. Also the manual "HP OpenView
	    OmniBack II HP SureStore E Disk Array XP256
	    Configuration Guide" will be released.

SR:
	0000000000

Patch Files:
	/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-1020/A.03.10/
		packet.Z
	/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-1020/A.03.10/
		require.dat

what(1) Output:
	/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-1020/A.03.10/
		packet.Z:
		None
	/opt/omni/databases/vendor/ssea/hp/s800/hp-ux-1020/A.03.10/
		require.dat:
		None

cksum(1) Output:
	3002982931 480793 /opt/omni/databases/vendor/ssea/hp/s800/
		hp-ux-1020/A.03.10/packet.Z
	2484855657 23 /opt/omni/databases/vendor/ssea/hp/s800/
		hp-ux-1020/A.03.10/require.dat

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
	PHSS_19525

Equivalent Patches:
	PHSS_21735:
	s700: 11.00
	s800: 11.00

Patch Package Size: 530 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_21734

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_21734.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_21734.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_21734.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_21734.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_21734:
	NOTE!
	This patch fixes a problem on systems with HP SureStore E
	Disk Array XP 256 integration. If this functionality is
	not required, the patch should not be installed.

	NOTE!
	This patch must be installed on the Installation Server
	host.

	The patch PHSS_19525 introduced new client SSEA that is
	only visible in the Windows NT "Install" user interface.
	In order to support the SureStoreE Agent changes this
	agent must be installed on the appropriate systems. Refer
	to the "HP OpenView OmniBack II HP SureStore E Disk Array
	XP 256 Configuration Guide" for more details on the
	installation.

	NOTE!
	Only the OmniBackII graphical user interface on
	Windows NT supports the installation of the SSEA.

	In order to enable the HP SurStoreE Agent (SSEA)
	functionality, a license-to-use (B7023AA) must be
	installed. In addition, at least the following OB2
	patches are required:

	   PHSS_21650/PHSS_21651 - Cell Server patch
	   PHSS_20111/PHSS_20112 - Oracle8 integration patch
	   PHSS_21770/PHSS_21771 - Core patch
	   PHSS_21732/PHSS_21733 - SAP integration patch
	   OMNIBACK_00012        - Windows NT

	Some of these above mentioned patches may be superseded
	by a newer patch.  Please check the  HP Electronic
	Support Center web page for latest and the most up
	to date patch status.

	For more information regarding the installation procedure
	refer to the "HP OpenView OmniBack II HP SureStore E Disk
	Array XP256 Configuration Guide"



	Patch includes the following Site Specific Patches:
	   SSPUX310_012