Patch Name: PHSS_20382 Patch Description: s700_800 10.X OV OB3.00 patch - packet CORE Creation Date: 99/11/24 Post Date: 99/12/17 Warning: 00/01/07 - This Non-Critical Warning has been issued by HP. - PHSS_20382 introduced a problem that can cause the update of agents on OmniBackII A.03.00 UNIX clients to abort with the error: Command execution on client failed! Once installed on the clients, the inet file delivered in PHSS_20382 no longer allows agents to be installed from the Installation Server. - HP recommends that PHSS_20382 be removed from all systems on which it is installed. In addition, each of the affected clients must have the problem inet file removed. The following steps should be followed to resolve the problem on the Installation Server and clients: 1. Remove PHSS_20382 from each Installation Server using swremove(1M). 2. Remove the inet file from each affected client. On HP-UX 10.X and 11.00 clients, the location of the file is /opt/omni/lbin/inet. On HP-UX 9.X and other UNIX clients the location of the file is /usr/omni/bin/inet. The following command can be executed on the Cell Server to list the complete list of clients and their platform: awk -F\" '{print $2,$4}' /etc/opt/omni/cell/cell_info 3. Update all clients with the disk agent in order to install an unaffected copy of inet to each of the clients. - The previous OmniBackII A.03.00 Core patch, PHSS_20085, does not exhibit this same problem. PHSS_20085 will be re-released until a replacement patch is available. To avoid the problem exhibited by PHSS_20382, but to insure that as many other known issues as possible are addressed, HP recommends that PHSS_20085 be installed after PHSS_20382 is removed. Please observe that PHSS_20382 must be removed before PHSS_20085 can be installed. However, if PHSS_20085 was installed prior to PHSS_20382, it will be restored when PHSS_20382 is removed. In this case, PHSS_20085 does not need to be reinstalled. - A replacement patch for PHSS_20382 should be available by the end of January. Hardware Platforms - OS Releases: s700: 10.00 10.01 10.10 10.20 s800: 10.00 10.01 10.10 10.20 Products: OmniBackII A.03.00 Filesets: OMNIBACK-II.OMNI-CORE-IS Automatic Reboot?: No Status: General Superseded With Warnings Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHSS_20382 Symptoms: PHSS_20382: Id = HSLco17608, HSLco17609 An user could obtain unauthorized access on an OmniBack II client host. PHSS_20085: Id = NSMex02773 Option '-change_objname' is obsolete, but is still explained in the usage and recognized by the omnidbutil executable. If used, the omnidbutil fails with the message: "Invalid old object name specified!" "Update failed!" PHSS_18680: Id = NSMex02181 The GUI licensing info shows wrong information when combined (e.g. product number B6951AA) licenses are installed. Id = HSLco14388 OmniBack II push installation to Irix 6.x fails with an error "Cannot uncompress". Id = NSMex02331 Eject fails, but no message is reported if the mailslot is full/empty during the eject/enter operation. PHSS_17307: Id = NSMex01657 If restore of large number of files is started via GUI, some files are not restored, although the session completed successfully. Id = HSLco12218 Installation of DA or MA module to SINIX system fails. Id = NSMex01820 Problem with Oracle database access. Id = HSLco12592 Installation of OB2 modules fails with the error message: "error: Unrecognized platform!" if root user uses csh as default shell after login. PHSS_16715: Id = HSLco11740 The disk Agent package can not be installed on IRIX 6.4 or on Irix 6.5. Defect Description: PHSS_20382: Id = HSLco17608, HSLco17609 An user could obtain unauthorized access on an OmniBack II client host. Resolution: The problem with unauthorized access has been fixed. PHSS_20085: Id = NSMex02773 The option '-change_objname' for the 'omnidbutil' command has been introduced with the SSPUX300_013. It modifies the object name in the OB2 internal database. This results in restore from the GUI not being possible for such object, but it can still be restored from the CLI command 'omnir'. Since the Cell Manager patch PHSS_18697, this option has been considered obsolete, but is still explained in the usage, and recognized by the command 'omnidbutil', although it doesn't change the object name anymore, and will fail instead. Resolution: The option '-change_objname' is removed from the usage and is not recognized by the 'omnidbutil' command anymore. PHSS_18680: Id = NSMex02181 xomniadmin GUI doesn't show combined licenses correctly (combined licenses are those, which contain two licenses, e.g. 1 'Cell Manager' + 1 'Single Drive' or 1 'Cell Manager' + 1 'Drive Server' licenses). Resolution: xomniadmin GUI now shows detailed list of licenses available, including the info for each password. Part of SSPUX300_050. Id = HSLco14388 If the OmniBack II is already installed on Irix 6.x then an upgrade or instalation to that system fails with the error: "Cannot uncompress". Resolution: Path for uncompress utility on Irix has been corrected. Id = NSMex02331 During eject/enter into/from full/empty mailslot on SCSI-II Library nothing happens for 10 minutes. There is no warning message that mailslot is full or empty and UMA is actually waiting for the operator to do the proper action (remove or enter the medium into the mailslot). Resolution: New message informs the operator that the medium should be removed or entered into the mailslot. PHSS_17307: Id = NSMex01657 The restore session passes a large number of parameters to the inet service. However only 1024 are accepted. As a result, the Disk Agent restores less files than it should. Because additional parameters are needed for each file, the number of successfully restored files is approximately 900 only. Resolution: Fix has been implemented in inet. Id = HSLco12218 Installation to SINIX systems fails because the 'uname -a' command on that systems reports "Reliant" instead of "SINIX". Part of: SSP30_16 Resolution: Fix has been implemented in util.sh and bmsetup. Id = NSMex01820 Access problem with OBII database integration scripts. Id = HSLco12592 If user administrator (root) uses csh as default shell after login to a system, installation of OmniBack II modules to that system will fail. OB2 implies ksh as the shell to be used. Resolution: Bmsetup now wraps the installation remote commands into sh shell. PHSS_16715: Id = HSLco11740 Installation of the Disk Agent on IRIX 6.4 or IRIX 6.5 is not supported. Support will now be added. SR: 5003461590 5003455857 5003441337 Patch Files: /opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-10/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/ A.03.00/packet.Z /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/sgi/mips/irix/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/siemens/r400/sinix/ A.03.00/packet.Z /opt/omni/databases/vendor/omnicf/sun/sparc/solaris/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/sun/sparc/sunos/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.03.00/ packet.Z /opt/omni/databases/vendor/omnicf/sequent/i386/dynix/ A.03.00/packet.Z /opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar /opt/omni/databases/utils/hp/s800/hp-ux/utils.tar /opt/omni/databases/utils/hp/s800/hp-ux-10/utils.tar /opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar /opt/omni/databases/utils/ibm/rs6000/aix/utils.tar /opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar /opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar /opt/omni/databases/utils/sco/i386/sco_sv/utils.tar /opt/omni/databases/utils/sequent/i386/dynix/utils.tar /opt/omni/databases/utils/sgi/mips/irix/utils.tar /opt/omni/databases/utils/sgi/mips/irix-62/utils.tar /opt/omni/databases/utils/siemens/r400/sinix/utils.tar /opt/omni/databases/utils/sun/sparc/solaris/utils.tar /opt/omni/databases/utils/sun/sparc/sunos/utils.tar /opt/omni/databases/packet.Z /opt/omni/lbin/bmsetup what(1) Output: /opt/omni/databases/vendor/omnicf/dec/alpha/osf1-4/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-10/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/hp/s800/hp-ux-1020/ A.03.00/packet.Z: None /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/ibm/rs6000/aix-42/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/sco/i386/sco_sv/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/sgi/mips/irix/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/sgi/mips/irix-62/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/siemens/r400/sinix/ A.03.00/packet.Z: None /opt/omni/databases/vendor/omnicf/sun/sparc/solaris/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/sun/sparc/sunos/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/ncr/i386/mp-ras/A.03.00/ packet.Z: None /opt/omni/databases/vendor/omnicf/sequent/i386/dynix/ A.03.00/packet.Z: None /opt/omni/databases/utils/dec/alpha/osf1-4/utils.tar: None /opt/omni/databases/utils/hp/s800/hp-ux/utils.tar: None /opt/omni/databases/utils/hp/s800/hp-ux-10/utils.tar: None /opt/omni/databases/utils/hp/s800/hp-ux-1020/utils.tar: None /opt/omni/databases/utils/ibm/rs6000/aix/utils.tar: None /opt/omni/databases/utils/ibm/rs6000/aix-42/utils.tar: None /opt/omni/databases/utils/ncr/i386/mp-ras/utils.tar: None /opt/omni/databases/utils/sco/i386/sco_sv/utils.tar: None /opt/omni/databases/utils/sequent/i386/dynix/utils.tar: None /opt/omni/databases/utils/sgi/mips/irix/utils.tar: None /opt/omni/databases/utils/sgi/mips/irix-62/utils.tar: None /opt/omni/databases/utils/siemens/r400/sinix/utils.tar: None /opt/omni/databases/utils/sun/sparc/solaris/utils.tar: None /opt/omni/databases/utils/sun/sparc/sunos/utils.tar: None /opt/omni/databases/packet.Z: None /opt/omni/lbin/bmsetup: [TZ=GMT0 /opt/omni/lbin/bmsetup -version] HP OpenView OmniBack II A.03.00: BMSETUP, internal b uild 1025, built on Mon Jun 21 14:43:23 1999 cksum(1) Output: 3613286862 1136919 /opt/omni/databases/vendor/omnicf/dec/ alpha/osf1-4/A.03.00/packet.Z 1372795799 1025351 /opt/omni/databases/vendor/omnicf/hp/ s800/hp-ux/A.03.00/packet.Z 2678014448 1171753 /opt/omni/databases/vendor/omnicf/hp/ s800/hp-ux-10/A.03.00/packet.Z 966015524 1167843 /opt/omni/databases/vendor/omnicf/hp/s800/ hp-ux-1020/A.03.00/packet.Z 102588824 906875 /opt/omni/databases/vendor/omnicf/ibm/ rs6000/aix/A.03.00/packet.Z 1368792584 908186 /opt/omni/databases/vendor/omnicf/ibm/ rs6000/aix-42/A.03.00/packet.Z 4209637349 940106 /opt/omni/databases/vendor/omnicf/sco/ i386/sco_sv/A.03.00/packet.Z 2000453837 1275827 /opt/omni/databases/vendor/omnicf/sgi/ mips/irix/A.03.00/packet.Z 3262475371 1308165 /opt/omni/databases/vendor/omnicf/sgi/ mips/irix-62/A.03.00/packet.Z 244359314 1110307 /opt/omni/databases/vendor/omnicf/siemens/ r400/sinix/A.03.00/packet.Z 2841955643 1048581 /opt/omni/databases/vendor/omnicf/sun/ sparc/solaris/A.03.00/packet.Z 1504420540 1859236 /opt/omni/databases/vendor/omnicf/sun/ sparc/sunos/A.03.00/packet.Z 3452312615 1003043 /opt/omni/databases/vendor/omnicf/ncr/ i386/mp-ras/A.03.00/packet.Z 1864670745 929481 /opt/omni/databases/vendor/omnicf/sequent/ i386/dynix/A.03.00/packet.Z 744760949 51200 /opt/omni/databases/utils/dec/alpha/osf1-4/ utils.tar 1252087630 71680 /opt/omni/databases/utils/hp/s800/hp-ux/ utils.tar 2679505380 40960 /opt/omni/databases/utils/hp/s800/hp-ux-10/ utils.tar 1617317179 40960 /opt/omni/databases/utils/hp/s800/ hp-ux-1020/utils.tar 3212660362 51200 /opt/omni/databases/utils/ibm/rs6000/aix/ utils.tar 1545449434 51200 /opt/omni/databases/utils/ibm/rs6000/ aix-42/utils.tar 3048689611 51200 /opt/omni/databases/utils/ncr/i386/mp-ras/ utils.tar 1688238726 51200 /opt/omni/databases/utils/sco/i386/sco_sv/ utils.tar 1178479359 51200 /opt/omni/databases/utils/sequent/i386/ dynix/utils.tar 2373959964 51200 /opt/omni/databases/utils/sgi/mips/irix/ utils.tar 2746700404 51200 /opt/omni/databases/utils/sgi/mips/irix-62/ utils.tar 3354851970 51200 /opt/omni/databases/utils/siemens/r400/ sinix/utils.tar 3540523275 51200 /opt/omni/databases/utils/sun/sparc/ solaris/utils.tar 891361597 51200 /opt/omni/databases/utils/sun/sparc/sunos/ utils.tar 3452312615 1003043 /opt/omni/databases/packet.Z 3124370133 415638 /opt/omni/lbin/bmsetup Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: PHSS_16715 PHSS_17307 PHSS_18680 PHSS_20085 Equivalent Patches: PHSS_20383: s700: 11.00 s800: 11.00 Patch Package Size: 17600 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHSS_20382 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHSS_20382.depot By default swinstall will archive the original software in /var/adm/sw/patch/PHSS_20382. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. WARNING: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHSS_20382.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHSS_20382.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: PHSS_20382: NOTE! Patch has to be installed on all Installation server hosts. NOTE! For complete resolution of the problems NSMex02773, NSMex01657, NSMex01890 and NSMex02181 the OmniBack II 3.00 Cell Manager patch PHSS_20083/PHSS_20084 or later must be installed on the Cell Manager system, and one of the client modules (Disk Agent, Media Agent or Cell Console) must be reinstalled on the Cell Manager system in order to update the CORE fileset there. In order for this patch to become effective any OB2 push packet (DA, MA, CC, SAP, Oracle, etc) has to be distributed to OB2 clients. Patch includes the following Site Specific Patches: SSPUX300_016 SSPUX300_050