Patch Name: PHSS_20113

Patch Description: s700_800 10.X OV OB3.10 patch - INFORMIX packet

Creation Date: 99/10/26

Post Date:  99/10/29

Hardware Platforms - OS Releases:
	s700: 10.00 10.01 10.10 10.20
	s800: 10.00 10.01 10.10 10.20

Products:
	OmniBackII A.03.10

Filesets:
	OMNIBACK-II.OMNI-INF-P

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_20113

Symptoms:
	PHSS_20113:
	Id = HSLco17396
	    Requirement to support Informix XPS 8.21 FD4 (64 bit)
	    within the OmniBack II/Informix integration package.

Defect Description:
	PHSS_20113:
	Id = HSLco17396
	    OmniBack II/INFORMIX integration does not support
	    Informix XPS 8.21 FD4 (64 bit).

	Resolution:
	    Informix XPS 8.21 FD4 (64 bit) is now supported within
	    Informix integration package. See special installation
	    instructions for additional information.

SR:
	0000000000

Patch Files:
	/opt/omni/databases/vendor/informix/hp/s800/hp-ux-1020/
		A.03.10/packet.Z

what(1) Output:
	/opt/omni/databases/vendor/informix/hp/s800/hp-ux-1020/
		A.03.10/packet.Z:
		None

cksum(1) Output:
	2532257353 891321 /opt/omni/databases/vendor/informix/hp/
		s800/hp-ux-1020/A.03.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHSS_20114:
	s700: 11.00
	s800: 11.00

Patch Package Size: 930 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_20113

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_20113.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_20113.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_20113.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_20113.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_20113:
	NOTE!
	The patch has to be installed on the Installation Server
	host.

	After the installation, the Informix packet must be
	redistributed to the Informix clients using the OB2
	GUI to get the fixes into effect.


	NOTE!
	This general release patch introduces support for Informix
	XPS 8.21 FD4 (64 bit) within the OmniBack II/Informix
	integration.

	Some onbar utilities are not supported with XPS server and
	therefore not available within OmniBack II/Informix
	integration. These are:

	   -Test backup
	   -Whole backup
	   -Whole restore
	   -Backup of current logical log

	Backup of current logical log is supported from the GUI.
	When user specifies any of these options, OmniBack II
	first switches logical logs (using command xctl onmode -l)
	and then starts backup of logical logs (onbar -l).