Patch Name: PHSS_19594

Patch Description: s700_800 10.X OV OB3.10 patch - SAP packet

Creation Date: 99/10/21

Post Date:  99/10/31

Hardware Platforms - OS Releases:
	s700: 10.00 10.01 10.10 10.20
	s800: 10.00 10.01 10.10 10.20

Products:
	OmniBackII A.03.10

Filesets:
	OMNIBACK-II.OMNI-SAP-P

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHSS_19594

Symptoms:
	PHSS_19594:
	Id = HSLco16368
	     HP SureStoreE Disk Array XP256 is not supported by
	     OmniBack II to perform a split mirror backup. This
	     patch does not fix any other problem.

Defect Description:
	PHSS_19594:
	Id = HSLco16368
	     Currently OmniBack II only supports the Split Mirror
	     Backup concept with EMC Symmetrix. After the
	     introduction of the new HP SureStoreE Disk Array
	     XP256, it was requested that OmniBack II also
	     supports this disk array with the split mirror backup
	     concept.  This requires to support Oracle 8.0.x and
	     SAP R/3 in this concept as well and in addition a new
	     manual is needed.

	Resolution:
	     The SureStoreE Agent (SSEA) was developed for
	     HP-UX to controll the SureStoreE disk array.
	     The Backup Session Manager, INET on HP-UX,
	     and the NT GUI were enhanced and in addition
	     Oracle 8.0.x and SAP integrations are
	     supported. Also the manual "HP OpenView
	     OmniBack II HP SureStore E Disk Array XP256
	     Configuration Guide" will be released.

SR:
	0000000000

Patch Files:
	/opt/omni/databases/vendor/sap/hp/s800/hp-ux-1020/A.03.10/
		packet.Z

what(1) Output:
	/opt/omni/databases/vendor/sap/hp/s800/hp-ux-1020/A.03.10/
		packet.Z:
		None

cksum(1) Output:
	2562462811 1111167 /opt/omni/databases/vendor/sap/hp/s800/
		hp-ux-1020/A.03.10/packet.Z

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHSS_19595:
	s700: 11.00
	s800: 11.00

Patch Package Size: 1140 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHSS_19594

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHSS_19594.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHSS_19594.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHSS_19594.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHSS_19594.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	PHSS_19594:
	NOTE!
	This patch does not fix any problems. It provides new
	functionality on top of OmniBack II A.03.10. If this
	functionality is not required, the patch should not be
	installed.

	NOTE!
	This patch must be installed on the Installation Server
	host.

	The OB2 SAP agent  must be redistributed to the SAP
	client system(s) after the installation of the patch
	in order to get the fixes into effect.

	For distribution of the SAP agent, refer to
	the OmnibackII Installation guide.

	In order to enable the HP SurStoreE Agent (SSEA)
	functionality, a license-to-use (B7023AA) must be
	installed. In addition, at least the following OB2
	patches are required:

	   PHSS_19519/PHSS_19520 - Cell Server patch
	   PHSS_19521/PHSS_19522 - Oracle8 integration patch
	   PHSS_19525/PHSS_19526 - SSEA integration patch
	   PHSS_19523/PHSS_19524 - Core patch
	   OMNIBACK_00010        - Windows NT

	Some of these above mentioned patches may be superseded
	by a newer patch.  Please check the  HP Electronic
	Support Center web page for latest and the most up
	to date patch status.

	For more information regarding the installation procedure
	refer to the "HP OpenView OmniBack II HP SureStore E Disk
	Array XP256 Configuration Guide"