Patch Name: PHNE_8891 Patch Description: s700_800 10.01 SNAplusRJE R4.1/R4.2 job failure Creation Date: 96/10/15 Post Date: 96/12/23 Hardware Platforms - OS Releases: s700: 10.01 s800: 10.01 Products: SNAplusRJE R4.1/R4.2 Filesets: SNAP-RJE.SNAP-RJE Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHNE_8891 Symptoms: PHNE_8891: (1) 1653186825 When running R4.2 version of SNAPLUS RJE the following error is reported if more than 10 FCBs are configured under an RJE workstation: SNA2006 - Too many RJE Resources configured. (2) 1653150631 If a customer includes a large number of files by using control lines in the job (~50 or greater) the job submission will fail with an error message: SNApluRJE:9503 snaprjesend/rjesub cannot create temporary file. (3) 5003299420 If a customer configures more than 10 FCB's RJE will not start. The customer will see error SNA2006 - Too many RJE Resources configured. (4) 1653132886 With some machines (particularly emerald) SNAPLUSRJE console facility (snaprjecon) hangs the physical console session on exit. (5) 1653147389 If jobs are submitted close together, sometimes they get the same spool file name and a job may be lost. Defect Description: PHNE_8891: (1) 1653186825 RJE was limited to a maximum of 10 FCBs. (2) 1653150631 The RJE job spooler cannot handle jobs with a large number of include files (included by control lines in the job). The job spooler is failing to close temporary files created for these include files. (3) 5003299420 The RJE workstation would not start if more than 10 FCB's were configured. (4) 1653132886 The RJE console sometimes hangs. (5) 1653147389 If jobs are submitted close together, sometimes they get the same spool file name and a job may be lost. SR: 5003299420 1653186825 1653150631 1653147389 1653132886 Patch Files: /opt/sna/bin/rjesub /opt/sna/bin/snaprjecon /opt/sna/bin/snaprjestart what(1) Output: /opt/sna/bin/snaprjestart: A.10.01.101 SNAplus R4.2 RJE workstation (PHNE_8891: 96/10/09 17:05:57) A.10.01.000 SNAplus R4.1 Utility Library (DART_25: 95/08/29 19:54:41) /opt/sna/bin/rjesub: A.10.01.101 SNAplus R4.2 RJE job spooler (PHNE_8891: 96/10/09 17:32:16) A.10.01.000 SNAplus R4.1 Utility Library (DART_25: 95/08/29 19:54:41) /opt/sna/bin/snaprjecon: A.10.01.101 SNAplus R4.2 RJE console (PHNE_8891: 96/10/09 17:25:31) A.10.01.100 SNAplus R4.2 Character Windows Library (DART_26: 96/06/12 16:37:54) A.10.01.100 SNAplus R4.2 Help Engine Library (DART_26: 96/06/12 15:23:43) A.10.01.000 SNAplus R4.1 Utility Library (DART_25: 95/08/29 19:54:41) cksum(1) Output: 4114754733 532480 /opt/sna/bin/snaprjestart 2129698596 69632 /opt/sna/bin/rjesub 769901677 192512 /opt/sna/bin/snaprjecon Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: None Patch Package Size: 830 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_8891 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_8891.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_8891.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_8891. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_8891.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_8891.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: Stop all RJE workstations and RJE console program before installing this patch.