Patch Name: PHNE_29321

Patch Description: s700_800 10.26 EISA 100BT cumulative patch

Creation Date: 03/08/12

Post Date: 03/08/15

Hardware Platforms - OS Releases:
	s700: 10.26
	s800: 10.26

Products:
	EISA100BT B.10.26

Filesets:
	100BT-EISA-KRN.100BT-KRN,B.10.26

Automatic Reboot?: Yes

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHNE_29321

Symptoms:
	PHNE_29321:
	Partial port of 10.20 patch PHNE_28635 to 10.26 (TOS).
	(PHNE_28635:)
	1. ( SR:8606294055 CR:JAGae57795 )
	   Inadequate frame padding.

Defect Description:
	PHNE_29321:
	Partial port of 10.20 patch PHNE_28635 to 10.26 (TOS).
	(PHNE_28635:)
	1. ( SR:8606294055 CR:JAGae57795 )
	   Inadequate frame padding.

	Resolution:
	   Adequate frame padding is done.

SR:
	8606294055

Patch Files:
	/usr/conf/lib/libbtlan0.a

what(1) Output:
	/usr/conf/lib/libbtlan0.a:
		03/06/23 100bteisa/Zone/hpux/bdm_hpux.c, hpux, hpux_
			10.26, ic5ic Revision 1.2 PATCH_10.26 (PHNE_
			29321) UNMODIFIED
		FILESET EISA100BT: lib btlan0:  Version: A.10.20- PH
			NE_11507

cksum(1) Output:
	1039172607 152952 /usr/conf/lib/libbtlan0.a

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches: None

Patch Package Size: 120 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHNE_29321

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHNE_29321.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHNE_29321.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHNE_29321.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHNE_29321.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None