Patch Name: PHNE_18711 Patch Description: s700_800 10.10 2.39 ISDN-PRI ACC Accessory Product Patch Creation Date: 99/09/02 Post Date: 00/06/08 Hardware Platforms - OS Releases: s700: 10.10 s800: 10.10 Products: Z7426AA_APX 2.39 Filesets: ACC-ISDN.ACC-ISDN-PRG ACC-ISDN.ACC-ISDN-RUN ACC-ISDNSAM.ACC-ISDNSAM-RUN ACC-ISDN.ACC-ISDN-KRN Automatic Reboot?: Yes Status: General Release Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHNE_18711 Symptoms: PHNE_18711: SR None / DTS TPO0h01987 Enhancement request to implement the isdn_pcfg utility program to reconfigure the ISDN port. SR None / DTS TPO0h02248 When an ISDN B-link is shutdown, occaisonally the ZCOM ZLUs associated with the B-link are not deallocated. SR None / DTS TPO0h02422 ISDN incorrectly configures T1 timeslots SR None / DTS TPO0h02659 ISDN B Channel won't be closed after the DISC_IND is received. SR None / DTS TPO0h02763 Running x25check can sometimes cause the ISDN subsystem to shutdown. TPO0h02610: Add Q4 support for the 10.X release. PHNE_15592: SR None / DTS TPO0h02089 Unpredictable behaviour by the nacc driver. Write completion length mismatches reported and inconsistent information logged in the driver trace. SR None / DTS TPO0h01339 Port line_code/frame_format vs. line_type is not cross checked. SR None / DTS TPO0h01747 The range of the I-frame size is incorrect. SR 5003405142 / DTS TPO0h01916 ISDN/ACC performance problem (connection refused). SR 5003406892 / DTS TPO0h01940 ISDN/ACC Sam Configuration problem (ERROR:6442 while disabling a port). SR None / DTS TPO0h01991 ISDN subsystem doesn't work if port operator field is "att_5e5". PHNE_13998: SR None / DTS TPO0h01888 Redialing shall not be performed more than twice in 3 minutes. SR 5003402081 / DTS TPO0h01889 Can't perform "loopback" test for more than 6 ports (2 E1/T1 cards). SR 1653234476 / DTS TPO0h01652 ITU/T 1988 Throughput class support Defect Description: PHNE_18711: SR None / DTS TPO0h01987 Enhancement request to implement the isdn_pcfg utility program to put the ISDN port into a tristate( reconfigure the port pmode state). SR None / DTS TPO0h02248 This problem was caused by some of the VCs were not properly enabled before the link is shutdown. The fix of this problem is to wait for all VCs are enabled then disconnecting the link. SR None / DTS TPO0h02422 The ISDN software dynamically configures timeslots. It incorrectly configures T1 with 1 thru 31 timeslots (the E1 configuration). For T1 configuration, it should only configure 1 thru 24 timeslots. Configuration for E1 should remain as 1 thru 31 timeslots. SR None / DTS TPO0h02659 This problem was caused by the ISDN driver did not set the VC into a proper state while processing the disconnect. The VC would not be closed because of the wrong VC state. The ISDN driver was modified to not set the VC to IDLE state if VC was in CONNECTING state. This change will let the ISDN driver to notify the ISDN daemon to clear the VC and close the B Channel. This fix is already included in PHNE_15351 and PHNE_15592 patches. SR None / DTS TPO0h02763 The ISDN alert_in message was partically implemented when the r.02.40.01 ISDN product is built. When the ISDN alert_in message is sent to the application, it does not know how to handle it so it shutdowns the ISDN subsystem. TPO0h02610: There is a commitment to provide Q4 support for the ACC B.02.39 and B.02.40 releases. PHNE_15592: SR None / DTS TPO0h02089 The AXIN and ISDN drivers use a different spl() level to that used by the nacc driver. This allows the nacc driver to be incorrectly re-entered. SR None / DTS TPO0h01339 In an ISDN port record, line_code and frame_format have values which seem to be particular to either E1 or T1. Currently, there is no check whether these values are consistent with the line_type value (e1 or t1) the customer has specified. SR None / DTS TPO0h01747 The I-frame size is the maximum number of bytes of level 2 Information frame. In isdnconfd, it checks the I-frame size in bits not bytes, which is incorrect. SR 5003405142 / DTS TPO0h01916 When running ISDN test with 8 ports and 17 grouplinks configuration, there are many "connection refused" errors. SR 5003406892 / DTS TPO0h01940 SAM returns error on [Enabled port] action. We did [Action]->[Enable Port Entry] to a Disabled port in "Port Selection and Configuration" with SAM, but SAM returned the error(6442) after 30 seconds. SR None / DTS TPO0h01991 The ISDN/ACC subsystem does not work if the port configuration file operator field is configured to "att_5e5" (AT & T 5ESS5). PHNE_13998: SR None / DTS TPO0h01888 Continue sending SETUP message if there is no response. SR 5003402081 / DTS TPO0h01889 "loopback" test fails on 7th port. SR 1653234476 / DTS TPO0h01652 64K Throughput Class doesn't get accepted SR: 5003405142 5003406892 5003402081 Patch Files: /opt/acc/include/isdn/isdn_sys.h /usr/sam/lib/C/acc_isdn_td.ui /opt/acc/bin/isdnconfd /usr/lib/nls/C/isdn_acc.cat /opt/acc/lib/libcfdmsg.sl /opt/acc/lib/libifld.sl /opt/acc/cfg/isdn/cfg_sample/x25_profile.cfg /opt/acc/cfg/isdn/icheck/x25prof /opt/acc/bin/dbtool /opt/acc/bin/isdnconfd_tool /opt/acc/bin/isdnwrapper /usr/sam/lib/acc/libacc_isdn.sl /opt/acc/bin/isdncalld /opt/acc/bin/isdn_pcfg /opt/acc/share/man/man1.Z/isdn_pcfg.1 /usr/conf/master.d/zisdn /opt/acc/bin/isdnx25d /usr/conf/lib/libzisdn.a /usr/conf/lib/libzisdnsyms.o /opt/acc/.patch_build_info_PHNE_18711 what(1) Output: /opt/acc/include/isdn/isdn_sys.h: None /usr/sam/lib/C/acc_isdn_td.ui: None /opt/acc/bin/isdnconfd: ACC Rel B.02.39 for B.10.10 PHNE_15592 isdnconfd ACC Rel B.02.39 for B.10.10 PHNE_15592 libdbapi.a ACC Rel B.02.39 for B.10.10 PHNE_15592 libdbmgmt.a ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN libcfdmi sc.a /usr/lib/nls/C/isdn_acc.cat: None /opt/acc/lib/libcfdmsg.sl: ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN libcfdms g.sl /opt/acc/lib/libifld.sl: ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN libifld. sl /opt/acc/cfg/isdn/cfg_sample/x25_profile.cfg: None /opt/acc/cfg/isdn/icheck/x25prof: None /opt/acc/bin/dbtool: ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN dbtool ACC Rel B.02.39 for B.10.10 PHNE_15592 libdbmgmt.a ACC Rel B.02.39 for B.10.10 PHNE_15592 libdbapi.a /opt/acc/bin/isdnconfd_tool: ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN isdnconf d_tool /opt/acc/bin/isdnwrapper: ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN isdnwrap per ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN libcfdmi sc.a /usr/sam/lib/acc/libacc_isdn.sl: ACC Rel B.02.39 for B.10.10 PHNE_15592 ISDN libacc_i sdn.sl /opt/acc/bin/isdncalld: ACC Rel B.02.39-B.02.39.02 for B.10.10 PHNE_18711 IS DN isdncalld ACC Rel B.02.39-B.02.39.02 for B.10.10 PHNE_18711 li bdbapi.a /opt/acc/bin/isdn_pcfg: None /opt/acc/share/man/man1.Z/isdn_pcfg.1: None /usr/conf/master.d/zisdn: None /opt/acc/bin/isdnx25d: ACC Rel B.02.39-B.02.39.02 for B.10.10 PHNE_18711 IS DN isdnx25d ACC Rel B.02.39-B.02.39.02 for B.10.10 PHNE_18711 li bdbapi.a /usr/conf/lib/libzisdn.a: ACC Rel B.02.39-B.02.39.02 for B.10.10 PHNE_18711 li bzisdn.a /usr/conf/lib/libzisdnsyms.o: ACC Rel B.02.39-B.02.39.02 for B.10.10 PHNE_18711 li bzisdnsyms.o /opt/acc/.patch_build_info_PHNE_18711: None cksum(1) Output: 2158887617 3209 /opt/acc/include/isdn/isdn_sys.h 2748996411 38912 /usr/sam/lib/C/acc_isdn_td.ui 2106846870 180590 /opt/acc/bin/isdnconfd 152106020 36336 /usr/lib/nls/C/isdn_acc.cat 1350760244 65608 /opt/acc/lib/libcfdmsg.sl 1769250533 36927 /opt/acc/lib/libifld.sl 1486309659 1953 /opt/acc/cfg/isdn/cfg_sample/x25_profile.cfg 644883018 3677 /opt/acc/cfg/isdn/icheck/x25prof 645227502 155912 /opt/acc/bin/dbtool 237675083 16438 /opt/acc/bin/isdnconfd_tool 2138841569 36986 /opt/acc/bin/isdnwrapper 3417187083 156123 /usr/sam/lib/acc/libacc_isdn.sl 3355242225 1235779 /opt/acc/bin/isdncalld 1407165186 36956 /opt/acc/bin/isdn_pcfg 2040157929 1217 /opt/acc/share/man/man1.Z/isdn_pcfg.1 3448467703 3461 /usr/conf/master.d/zisdn 1656315521 114990 /opt/acc/bin/isdnx25d 1770448493 40812 /usr/conf/lib/libzisdn.a 1193781015 217404 /usr/conf/lib/libzisdnsyms.o 576615568 579 /opt/acc/.patch_build_info_PHNE_18711 Patch Conflicts: None Patch Dependencies: s700: 10.10: PHNE_18713 PHNE_18715 s800: 10.10: PHNE_18713 PHNE_18715 PHNE_18714 Hardware Dependencies: None Other Dependencies: None Supersedes: PHNE_13998 PHNE_15592 Equivalent Patches: None Patch Package Size: 2410 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_18711 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_18711.depot By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_18711. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. WARNING: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_18711.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_18711.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT After installing this patch, the ACC subsystem must then be stopped and restarted using zmasterd, the ISDN subsystem then can be restarted using isdnconfd.