Patch Name: PHNE_15938 Patch Description: s700_800 10.20 R6.10.20 SNAplus2 Common patch Creation Date: 98/07/24 Post Date: 99/01/13 Hardware Platforms - OS Releases: s700: 10.20 s800: 10.20 Products: SNAplus2-Common R6.10.20 Filesets: SNAplus2-Common.SNAP2-CORE SNAplus2-Common.SNAP2-ASCIIADM SNAplus2-Common.SNAP2-ADMIN Automatic Reboot?: Yes Status: General Superseded Critical: Yes PHNE_15938: ABORT Path Name: /hp-ux_patches/s700_800/10.X/PHNE_15938 Symptoms: PHNE_15938: (1) 5003406991 APING Verb does not allow you to enter securty type as 'NONE', 'SAME' or 'PGM' (and also 'PGM_STRONG' with R6) - you can only use 'NO'. (2) 4701396440 If you run snapmigrate, any RJE workstation definitions are migrated with an extension of '.RJE' and must be renamed before use. (3) 4701396382 Multiple symptoms in complext R5/R6 client server test. Core dump from snapslim process. (4) 4701396374 Node fails to start if TN Client configured with unrecognised hostname. (5) 4701396366 back level config program (xsnapconfig) help screens corrupted. (6) 4701391508 Any API application using DCE threads finds that each verb takes 0.2 seconds to complete. (7) 1653260620 Ascii Admin coredumps when expanding a port if any LS on the port has more than 200 LU type 0-3's. PHNE_14393: (1) 4701386326 Asserts logged in sna.err when using mixed architecture client server network ( ie mixture of 32 /64 bit servers) (2) 4701386318 Unable to read environment variables out of sna_tps file with ' in them. (3) 4701386300 R6 admin problems in mixed R5/R6 client server configuration (4) 4701386235 R6 snap2adm configuration errors in LS and Node Defect Description: PHNE_15938: (1) 5003406991 Code change to allow all of the 'NONE', 'SAME' or 'PGM' values on the aping verb. Note that the apingd daemon provided by SNAplus2 does not support securty - so if you are using aping to ping a SNAplus2 node, then only 'NONE' will give a successful response. (2) 4701396440 snapmigrate code changed to correctly migrate RJE workstation definitions with an extension of '.sty' instead of '.RJE' . (3) 4701396382 Problems with core dump in snapslim process and asserts errors logged. Code changed to ensure handling of Master / Backup handover allows for failing to contact new master. (4) 4701396374 Code changed to allow the node to start if it finds a TN Client configured with unrecognised hostname, but generates an error log which tells the user of the failure. (5) 4701396366 Code change correct corruption in help files for back level config program xsnapconfig. (6) 4701391508 The problem is due to a flaw in the design of the way DCE implements the 'poll()' call. Code changed to work around this problem in DCE by using 'select()'. (7) 1653260620 Code changed to allow up to 255 LU type 0-3's per LS. Also increment max number of LU0-3 per node from 2000 to 10000 and max number of LUs in a pool from 1000 to 2000. PHNE_14393: (1) 4701386326 Code change made to ensure client/server messages for sna.net indications are include in the codex component which handles 32/64 bit alignment conversion. (2) 4701386318 Code change to Correct tokenizer in parsing engine to handle sna_tps file contents correctly. (3) 4701386300 Code changes made to snapcfgdae to fix R5/R6 mixed environment problems. (4) 4701386235 Code changes made in snap2adm to fix configuration errors. SR: 5003406991 4701396440 4701396382 4701396374 4701396366 4701391508 4701386326 4701386318 4701386300 4701386235 1653260620 Patch Files: /opt/sna/lib/nls/msg/sna_log.msg /opt/sna/bin/X11/xsnapconfig /opt/sna/bin/snapcfgdae /opt/sna/bin/snapslim /opt/sna/bin/snap2adm /opt/sna/bin/snapmigrate2 /opt/sna/lib/libmgrdce.1 /opt/sna/lib/libpe.1 /opt/sna/lib/libxp.1 what(1) Output: /opt/sna/lib/libmgrdce.1: ]R6.10.20.003 SNAplus2 R6 Multi-threaded Path Manage r and support libraries, User Space ] (PHNE_15938 : 98/05/22 13:29:06) ] /opt/sna/lib/libpe.1: ]R6.10.20.002 SNAplus2 R6 parsing engine ] (PHNE_15938 : 98/04/20 14:27:03) ] /opt/sna/lib/libxp.1: ]R6.10.20.001 SNAplus2 R6 XP Codex library ] (PHNE_14393 : 98/03/24 10:44:38) ] /opt/sna/lib/nls/msg/sna_log.msg: ]6.0.0-Mon_Jul_13_11:29:09_BST_1998_Message_file /opt/sna/bin/snapcfgdae: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ ]R6.10.20.002 SNAplus2 R6 Config Daemon ] (PHNE_14393 : 98/03/24 10:41:35) ] /opt/sna/bin/snapmigrate2: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ ]R6.10.20.001 SNAplus2 R6 Config file migration tool ] (PHNE_15938 : 98/07/01 14:43:33) ] /opt/sna/bin/snapslim: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ ]R6.10.20.002 SNAplus2 R6 Client Server SLIM ] (PHNE_15938 : 98/07/21 23:26:10) ] /opt/sna/bin/snap2adm: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ ]R6.10.20.002 SNAplus2 R6 ASCII Administration progr am ] (PHNE_15938 : 98/07/20 17:54:58) ] /opt/sna/bin/X11/xsnapconfig: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ ]R6.10.20.002 SNAplus2 R6 V4 Configurator - Motif ] (PHNE_15938 : 98/07/01 15:12:01) ] cksum(1) Output: 1473216472 319488 /opt/sna/lib/libmgrdce.1 1595042790 880640 /opt/sna/lib/libpe.1 2473028927 434176 /opt/sna/lib/libxp.1 2403252442 686592 /opt/sna/lib/nls/msg/sna_log.msg 4015514983 802432 /opt/sna/bin/snapcfgdae 2637972145 167552 /opt/sna/bin/snapmigrate2 397118113 241280 /opt/sna/bin/snapslim 1958318253 1326720 /opt/sna/bin/snap2adm 1944660009 937600 /opt/sna/bin/X11/xsnapconfig Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: PHNE_14393 Equivalent Patches: None Patch Package Size: 5730 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_15938 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_15938.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_15938.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_15938. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_15938.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_15938.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: Stop SNA daemon before installing patch (snap stop). After installing the patch start the SNA daemon (snap start).