Patch Name: PHNE_15594 Patch Description: s700_800 10.10 2.39 ACC HDLC NRM Protocol Patch Creation Date: 98/01/30 Post Date: 98/07/09 Hardware Platforms - OS Releases: s700: 10.10 s800: 10.10 Products: Z7416AA APX Filesets: ACC-HDLCNRM.ACC-HDLCNRM-FW Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHNE_15594 Symptoms: PHNE_15594: SR 4701391862 / DTS TPO0h01966 No current method to determine hardware revision PHNE_14054: SR None / DTS TPO0h01833 8-channel NIO card crashes, with the use of the frame protocol and hdlcabm protocol together on the same port. SR None / DTS TPO0h01640 2 channel ACC card transmits a bad frame at the beginning of link setup. Defect Description: PHNE_15594: SR 4701391862 / DTS TPO0h01966 Enhancement to detect hardware revisions of ACC cards. A standard interface has been defined to identify hardware revisions of all ACC cards. The 'mx' command of zmntr has been enhanced to include the display of the hardware revision. PHNE_14054: SR None / DTS TPO0h01833 Firmware failures with FRAME and HDLCABM concurrently in use. SR None / DTS TPO0h01640 2ch card transmits bad frame on link startup SR: 4701380642 4701391862 Patch Files: /opt/acc/z7200a/hdlcnrm.zabs /opt/acc/z7200a/hdlcnrm.zmap /opt/acc/z7350a/hdlcnrm.zabs /opt/acc/z7350a/hdlcnrm.zmap /opt/acc/z7400a/hdlcnrm.zabs /opt/acc/z7400a/hdlcnrm.zmap what(1) Output: /opt/acc/z7200a/hdlcnrm.zabs: ZCOM System Firmware (ROM) Rev 04.B 921106.1200 ACC Rel B.02.39 for B.10.10 PHNE_14054 z7200_snp.z8 0 ZCOM System Software (WMUX1) ACC Rel B.02.39 for B.10.10 PHNE_14054 wmux1.z80 ZCOM System Software (WMUX3) ACC Rel B.02.39 for B.10.10 PHNE_14054 wmux3.z80 CPU clock 16MHz ZCOM System Software (WMUX4) ACC Rel B.02.39 for B.10.10 PHNE_14054 wmux4.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.39 for B.10.10 PHNE_14054 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.39 for B.10.10 PHNE_14054 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.39 for B.10.10 PHNE_14054 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 pmenttab.z80 ZCOM System Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 umuxent.z80 /opt/acc/z7200a/hdlcnrm.zmap: ZCOM System Firmware (ROM) Rev 04.B 921106.1200 ACC Rel B.02.39 for B.10.10 PHNE_14054 z7200_snp.z8 0 ZCOM System Software (WMUX1) ACC Rel B.02.39 for B.10.10 PHNE_14054 wmux1.z80 ZCOM System Software (WMUX3) ACC Rel B.02.39 for B.10.10 PHNE_14054 wmux3.z80 CPU clock 16MHz ZCOM System Software (WMUX4) ACC Rel B.02.39 for B.10.10 PHNE_14054 wmux4.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.39 for B.10.10 PHNE_14054 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.39 for B.10.10 PHNE_14054 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.39 for B.10.10 PHNE_14054 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 pmenttab.z80 ZCOM System Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 umuxent.z80 /opt/acc/z7350a/hdlcnrm.zabs: ZCOM System Firmware (ROM) Rev 01.T5 ACC Rel B.02.39 for B.10.10 PHNE_14054 z7350_rom.z8 0 ZCOM Z7350A System Software ACC Rel B.02.39 for B.10.10 PHNE_14054 z7350_fw.z80 CPU clock 32MHz ZCOM LEVEL1 Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.39 for B.10.10 PHNE_14054 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.39 for B.10.10 PHNE_14054 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.39 for B.10.10 PHNE_14054 testprot_ius c.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 pmenttab.z80 /opt/acc/z7350a/hdlcnrm.zmap: ZCOM System Firmware (ROM) Rev 01.T5 ACC Rel B.02.39 for B.10.10 PHNE_14054 z7350_rom.z8 0 ZCOM Z7350A System Software ACC Rel B.02.39 for B.10.10 PHNE_14054 z7350_fw.z80 CPU clock 32MHz ZCOM LEVEL1 Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.39 for B.10.10 PHNE_14054 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.39 for B.10.10 PHNE_14054 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.39 for B.10.10 PHNE_14054 testprot_ius c.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 pmenttab.z80 /opt/acc/z7400a/hdlcnrm.zmap: ZCOM System Firmware (ROM) Rev 01.B5 ACC Rel B.02.39 for B.10.10 PHNE_14054 z7400_rom.z8 0 ZCOM Z7400A System Software ACC Rel B.02.39 for B.10.10 PHNE_14054 z7400_fw.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.39 for B.10.10 PHNE_14054 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.39 for B.10.10 PHNE_14054 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.39 for B.10.10 PHNE_14054 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.39 for B.10.10 PHNE_14054 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_14054 pmenttab.z80 /opt/acc/z7400a/hdlcnrm.zabs: ZCOM System Firmware (ROM) Rev 01.B5 ACC Rel B.02.39 for B.10.10 PHNE_15594 z7400_rom.z8 0 ZCOM Z7400A System Software ACC Rel B.02.39 for B.10.10 PHNE_15594 z7400_fw.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.39 for B.10.10 PHNE_15594 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.39 for B.10.10 PHNE_15594 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.39 for B.10.10 PHNE_15594 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.39 for B.10.10 PHNE_15594 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.39 for B.10.10 PHNE_15594 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.39 for B.10.10 PHNE_15594 pmenttab.z80 cksum(1) Output: 3623819959 25154 /opt/acc/z7200a/hdlcnrm.zabs 3072918543 19539 /opt/acc/z7200a/hdlcnrm.zmap 939427972 24434 /opt/acc/z7350a/hdlcnrm.zabs 3679642282 18368 /opt/acc/z7350a/hdlcnrm.zmap 2900820970 18217 /opt/acc/z7400a/hdlcnrm.zmap 2076694536 25202 /opt/acc/z7400a/hdlcnrm.zabs Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: PHNE_14054 Equivalent Patches: None Patch Package Size: 200 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_15594 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_15594.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_15594.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_15594. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_15594.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_15594.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT After installing this patch, the ACC subsystem must then be stopped and restarted using zmasterd in order to download the new firmware.