Patch Name: PHNE_15375

Patch Description: s700_800 10.01-[12]0 ACC 2.2X HDLC-NRM FW (EISA) Patch

Creation Date: 98/05/25

Post Date:  98/06/11

Hardware Platforms - OS Releases:
	s700: 10.01 10.10 10.20
	s800: 10.01 10.10 10.20

Products:
	Z7286A 2.22;
	Z7416AA 2.22 2.23

Filesets:
	ACC-HDLCNRM.ACC-HDLCNRM-FW

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHNE_15375

Symptoms:
	PHNE_15375:
	SR 4701391912 / DTS TPO0h01966:
	No current method to determine hardware revision

Defect Description:
	PHNE_15375:
	SR 4701391912 / DTS TPO0h01966:
	Enhancement to detect hardware revisions of ACC cards.
	A standard interface has been defined to identify hardware
	revisions of all ACC cards.  The 'mx' command of zmntr has
	been enhanced to include the display of the hardware
	revision.

SR:
	4701391912

Patch Files:
	/opt/acc/z7400a/hdlcnrm.zabs
	/opt/acc/z7400a/hdlcnrm.zmap

what(1) Output:
	/opt/acc/z7400a/hdlcnrm.zabs:
		ZCOM System Firmware (ROM)   Rev 01.B5  970416.1600
		ZCOM Z7400A System Software  Rev 01.C   970624.1601
		ZCOM LEVEL1 Protocol
		REV_STR level1.z80
		ZCOM HDLC NRM PROTOCOL Rev 03.03        960528.1711
		ZCOM HDLC NRM State Tables Rev:2.11     961129.1540
		ZCOM Monitor module Rev 3.0             940706.1800
		ZCOM Port diagnostic module Rev 2.2     950808.1200
		ZCOM Protocol module entry point table  870406.1041
	/opt/acc/z7400a/hdlcnrm.zmap:
		ZCOM System Firmware (ROM)   Rev 01.B5  970416.1600
		ZCOM Z7400A System Software  Rev 01.C   970624.1601
		ZCOM LEVEL1 Protocol
		REV_STR level1.z80
		ZCOM HDLC NRM PROTOCOL Rev 03.03        960528.1711
		ZCOM HDLC NRM State Tables Rev:2.11     961129.1540
		ZCOM Monitor module Rev 3.0             940706.1800
		ZCOM Port diagnostic module Rev 2.2     950808.1200
		ZCOM Protocol module entry point table  870406.1041

cksum(1) Output:
	3814576566 24508 /opt/acc/z7400a/hdlcnrm.zabs
	3818119078 17359 /opt/acc/z7400a/hdlcnrm.zmap

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches: None

Patch Package Size: 100 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHNE_15375

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHNE_15375.depot

	5b. For a homogeneous NFS Diskless cluster run swcluster on the
	    server to install the patch on the server and the clients:

		swcluster -i -b

	    This will invoke swcluster in the interactive mode and
	    force all clients to be shut down.

	    WARNING: All cluster clients must be shut down prior to the
		     patch installation.  Installing the patch while the
		     clients are booted is unsupported and can lead to
		     serious problems.

	    The swcluster command will invoke an swinstall session in which
	    you must specify:

		alternate root path  -  default is /export/shared_root/OS_700
		source depot path    -  /tmp/PHNE_15375.depot

	    To complete the installation, select the patch by choosing
	    "Actions -> Match What Target Has" and then "Actions -> Install"
	    from the Menubar.

	5c. For a heterogeneous NFS Diskless cluster:

		- run swinstall on the server as in step 5a to install
		  the patch on the cluster server.

		- run swcluster on the server as in step 5b to install
		  the patch on the cluster clients.

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHNE_15375.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	Warning: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHNE_15375.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHNE_15375.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	SUBSYSTEM_SHUT
	After installing this patch, the ACC subsystem must then be
	stopped and restarted using zmasterd in order to download
	the new firmware.