Patch Name: PHNE_15351 Patch Description: s700_800 10.20 2.40 ISDN-PRI ACC Accessory Product Patch Creation Date: 98/06/01 Post Date: 98/07/15 Hardware Platforms - OS Releases: s700: 10.20 s800: 10.20 Products: Z7426AA APZ Filesets: ACC-ISDN.ACC-ISDN-PRG ACC-ISDN.ACC-ISDN-RUN ACC-ISDNSAM.ACC-ISDNSAM-RUN ACC-ISDN.ACC-ISDN-KRN Automatic Reboot?: Yes Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHNE_15351 Symptoms: PHNE_15351: SR None / DTS TPO0h02089 Unpredictable behaviour by the nacc driver. Write completion length mismatches reported and inconsistent information logged in the driver trace. SR None / DTS TPO0h01339 Port line_code/frame_format vs. line_type is not cross checked. SR None / DTS TPO0h01747 The range of the I-frame size is incorrect. SR 5003405142 / DTS TPO0h01916 ISDN/ACC performance problem (connection refused). SR 5003406892 / DTS TPO0h01940 ISDN/ACC Sam Configuration problem (ERROR:6442 while disabling a port). SR None / DTS TPO0h01991 ISDN subsystem doesn't work if port operator field is "att_5e5". PHNE_13999: SR None / DTS TPO0h01888 Redialing shall not be performed more than twice in 3 minutes. SR 5003402081 / DTS TPO0h01889 Can't perform "loopback" test for more than 6 ports (2 E1/T1 cards). Defect Description: PHNE_15351: SR None / DTS TPO0h02089 The AXIN and ISDN drivers use a different spl() level to that used by the nacc driver. This allows the nacc driver to be incorrectly re-entered. SR None / DTS TPO0h01339 In an ISDN port record, line_code and frame_format have values which seem to be particular to either E1 or T1. Currently, there is no check whether these values are consistent with the line_type value (e1 or t1) the customer has specified. SR None / DTS TPO0h01747 The I-frame size is the maximum number of bytes of level 2 Information frame. In isdnconfd, it checks the I-frame size in bits not bytes, which is incorrect. SR 5003405142 / DTS TPO0h01916 When running ISDN test with 8 ports and 17 grouplinks configuration, there are many "connection refused" errors. SR 5003406892 / DTS TPO0h01940 SAM returns error on [Enabled port] action. We did [Action]->[Enable Port Entry] to a Disabled port in "Port Selection and Configuration" with SAM, but SAM returned the error(6442) after 30 seconds. SR None / DTS TPO0h01991 The ISDN/ACC subsystem does not work if the port configuration file operator field is configured to "att_5e5" (AT & T 5ESS5). PHNE_13999: SR None / DTS TPO0h01888 Continue sending SETUP message if there is no response. SR 5003402081 / DTS TPO0h01889 "loopback" test fails on 7th port. SR: 5003405142 5003406892 5003402081 Patch Files: /opt/acc/include/isdn/isdn_sys.h /usr/sam/lib/C/acc_isdn_td.ui /opt/acc/bin/isdnconfd /usr/lib/nls/C/isdn_acc.cat /opt/acc/lib/libcfdmsg.sl /opt/acc/lib/libifld.sl /opt/acc/cfg/isdn/cfg_sample/x25_profile.cfg /opt/acc/cfg/isdn/icheck/x25prof /opt/acc/bin/dbtool /opt/acc/bin/isdnconfd_tool /opt/acc/bin/isdnwrapper /opt/acc/bin/isdnx25d /opt/acc/bin/isdncalld /usr/sam/lib/acc/libacc_isdn.sl /usr/conf/lib/libzisdn.a what(1) Output: /opt/acc/include/isdn/isdn_sys.h: None /usr/sam/lib/C/acc_isdn_td.ui: None /opt/acc/bin/isdncalld: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN isdncall d ACC Rel B.02.40 for B.10.20 PHNE_15351 libdbapi.a /usr/lib/nls/C/isdn_acc.cat: None /opt/acc/lib/libcfdmsg.sl: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN libcfdms g.sl /opt/acc/lib/libifld.sl: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN libifld. sl /opt/acc/cfg/isdn/cfg_sample/x25_profile.cfg: None /opt/acc/cfg/isdn/icheck/x25prof: None /opt/acc/bin/dbtool: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN dbtool ACC Rel B.02.40 for B.10.20 PHNE_15351 libdbmgmt.a ACC Rel B.02.40 for B.10.20 PHNE_15351 libdbapi.a /opt/acc/bin/isdnconfd_tool: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN isdnconf d_tool /opt/acc/bin/isdnwrapper: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN isdnwrap per ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN libcfdmi sc.a /opt/acc/bin/isdnx25d: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN isdnx25d ACC Rel B.02.40 for B.10.20 PHNE_15351 libdbapi.a /usr/sam/lib/acc/libacc_isdn.sl: ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN libacc_i sdn.sl /usr/conf/lib/libzisdn.a: ACC Rel B.02.40 for B.10.20 PHNE_15351 libzisdn.a /opt/acc/bin/isdnconfd: ACC Rel B.02.40 for B.10.20 PHNE_15351 isdnconfd ACC Rel B.02.40 for B.10.20 PHNE_15351 libdbapi.a ACC Rel B.02.40 for B.10.20 PHNE_15351 libdbmgmt.a ACC Rel B.02.40 for B.10.20 PHNE_15351 ISDN libcfdmi sc.a cksum(1) Output: 2960829305 3208 /opt/acc/include/isdn/isdn_sys.h 2748996411 38912 /usr/sam/lib/C/acc_isdn_td.ui 1876036223 1270099 /opt/acc/bin/isdncalld 152106020 36336 /usr/lib/nls/C/isdn_acc.cat 4192043113 65618 /opt/acc/lib/libcfdmsg.sl 3550487404 36946 /opt/acc/lib/libifld.sl 1486309659 1953 /opt/acc/cfg/isdn/cfg_sample/x25_profile.cfg 644883018 3677 /opt/acc/cfg/isdn/icheck/x25prof 369046768 160066 /opt/acc/bin/dbtool 1386307194 16444 /opt/acc/bin/isdnconfd_tool 131038822 37013 /opt/acc/bin/isdnwrapper 3460697397 123312 /opt/acc/bin/isdnx25d 996407888 180691 /opt/acc/bin/isdnconfd 3404302898 152222 /usr/sam/lib/acc/libacc_isdn.sl 1338696811 41312 /usr/conf/lib/libzisdn.a Patch Conflicts: None Patch Dependencies: s700: 10.20: PHNE_15354 PHNE_15363 s800: 10.20: PHNE_15354 PHNE_15363 PHNE_15364 Hardware Dependencies: None Other Dependencies: None Supersedes: PHNE_13999 Equivalent Patches: None Patch Package Size: 2190 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_15351 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_15351.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_15351.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_15351. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_15351.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_15351.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT After installing this patch, the ACC subsystem must then be stopped and restarted using zmasterd, the ISDN subsystem then can be restarted using isdnconfd.