Patch Name: PHNE_14055 Patch Description: s700_800 10.20 ACC 2.40 HDLC NRM Protocol Patch Creation Date: 98/01/30 Post Date: 98/03/06 Hardware Platforms - OS Releases: s700: 10.20 s800: 10.20 Products: Z7416AA APZ Filesets: ACC-HDLCNRM.ACC-HDLCNRM-FW Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHNE_14055 Symptoms: PHNE_14055: SR None / DTS TPO0h01833 8-channel NIO card crashes, with the use of the frame protocol and hdlcabm protocol together on the same port. SR None / DTS TPO0h01640 2 channel ACC card transmits a bad frame at the beginning of link setup. Defect Description: PHNE_14055: SR None / DTS TPO0h01833 Firmware failures with FRAME and HDLCABM concurrently in use. SR None / DTS TPO0h01640 2ch card transmits bad frame on link startup SR: 4701380642 Patch Files: /opt/acc/z7200a/hdlcnrm.zabs /opt/acc/z7200a/hdlcnrm.zmap /opt/acc/z7350a/hdlcnrm.zabs /opt/acc/z7350a/hdlcnrm.zmap /opt/acc/z7400a/hdlcnrm.zabs /opt/acc/z7400a/hdlcnrm.zmap what(1) Output: /opt/acc/z7200a/hdlcnrm.zabs: ZCOM System Firmware (ROM) Rev 04.B 921106.1200 ACC Rel B.02.40 for B.10.20 PHNE_14055 z7200_snp.z8 0 ZCOM System Software (WMUX1) ACC Rel B.02.40 for B.10.20 PHNE_14055 wmux1.z80 ZCOM System Software (WMUX3) ACC Rel B.02.40 for B.10.20 PHNE_14055 wmux3.z80 CPU clock 16MHz ZCOM System Software (WMUX4) ACC Rel B.02.40 for B.10.20 PHNE_14055 wmux4.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.40 for B.10.20 PHNE_14055 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14055 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14055 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 pmenttab.z80 ZCOM System Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 umuxent.z80 /opt/acc/z7200a/hdlcnrm.zmap: ZCOM System Firmware (ROM) Rev 04.B 921106.1200 ACC Rel B.02.40 for B.10.20 PHNE_14055 z7200_snp.z8 0 ZCOM System Software (WMUX1) ACC Rel B.02.40 for B.10.20 PHNE_14055 wmux1.z80 ZCOM System Software (WMUX3) ACC Rel B.02.40 for B.10.20 PHNE_14055 wmux3.z80 CPU clock 16MHz ZCOM System Software (WMUX4) ACC Rel B.02.40 for B.10.20 PHNE_14055 wmux4.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.40 for B.10.20 PHNE_14055 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14055 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14055 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 pmenttab.z80 ZCOM System Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 umuxent.z80 /opt/acc/z7350a/hdlcnrm.zabs: ZCOM System Firmware (ROM) Rev 01.T5 ACC Rel B.02.40 for B.10.20 PHNE_14055 z7350_rom.z8 0 ZCOM Z7350A System Software ACC Rel B.02.40 for B.10.20 PHNE_14055 z7350_fw.z80 CPU clock 32MHz ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.40 for B.10.20 PHNE_14055 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14055 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14055 testprot_ius c.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 pmenttab.z80 /opt/acc/z7350a/hdlcnrm.zmap: ZCOM System Firmware (ROM) Rev 01.T5 ACC Rel B.02.40 for B.10.20 PHNE_14055 z7350_rom.z8 0 ZCOM Z7350A System Software ACC Rel B.02.40 for B.10.20 PHNE_14055 z7350_fw.z80 CPU clock 32MHz ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.40 for B.10.20 PHNE_14055 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14055 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14055 testprot_ius c.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 pmenttab.z80 /opt/acc/z7400a/hdlcnrm.zabs: ZCOM System Firmware (ROM) Rev 01.B5 ACC Rel B.02.40 for B.10.20 PHNE_14055 z7400_rom.z8 0 ZCOM Z7400A System Software ACC Rel B.02.40 for B.10.20 PHNE_14055 z7400_fw.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.40 for B.10.20 PHNE_14055 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14055 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14055 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 pmenttab.z80 /opt/acc/z7400a/hdlcnrm.zmap: ZCOM System Firmware (ROM) Rev 01.B5 ACC Rel B.02.40 for B.10.20 PHNE_14055 z7400_rom.z8 0 ZCOM Z7400A System Software ACC Rel B.02.40 for B.10.20 PHNE_14055 z7400_fw.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 level1.z80 ZCOM HDLC NRM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14055 hdlcnrm.z80 ZCOM HDLC NRM State Tables ACC Rel B.02.40 for B.10.20 PHNE_14055 nrmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14055 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14055 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14055 pmenttab.z80 cksum(1) Output: 1938719720 25154 /opt/acc/z7200a/hdlcnrm.zabs 2122874989 19539 /opt/acc/z7200a/hdlcnrm.zmap 2080805862 24434 /opt/acc/z7350a/hdlcnrm.zabs 3833337014 18368 /opt/acc/z7350a/hdlcnrm.zmap 494340744 25186 /opt/acc/z7400a/hdlcnrm.zabs 4293876010 18217 /opt/acc/z7400a/hdlcnrm.zmap Patch Conflicts: None Patch Dependencies: s700: 10.20: PHNE_13990 s800: 10.20: PHNE_13990 Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: None Patch Package Size: 190 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_14055 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_14055.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_14055.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_14055. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_14055.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_14055.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT After installing this patch, the ACC subsystem must then be stopped and restarted using zmasterd in order to download the new firmware.