Patch Name: PHNE_14011 Patch Description: s700_800 10.20 ACC 2.40 X.25 Protocol Product Patch Creation Date: 98/01/30 Post Date: 98/03/06 Hardware Platforms - OS Releases: s700: 10.20 s800: 10.20 Products: Z7404AA APZ Filesets: ACC-X25.ACC-X25-FW Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHNE_14011 Symptoms: PHNE_14011: SR NONE / DTS TPO0h01833 8-channel NIO card crashes, with the use of the frame protocol and hdlcabm protocol together on the same port. SR NONE / DTS TPO0h01640 The following trace shows that the 2-ch ACC card transmits a bad frame (search for BAD) at the beginning of link setup. 10:03:45/310.3 1- TD D1 FRAME len=0034 flg=0002 01 44 10 01 13 00 f1 01 59 01 3f 01 3f 01 3f 01 BAD! 3f 01 3f 01 3f 01 3f 01 3f 01 3f 01 3f 01 3f 01 01 3f 10:03:45/546.9 1- RD D1 FRAME len=0002 flg=9999 01 0f SR NONE / DTS TPO0h01755 This problem was spotted in dump files In addition to the incorrect REJ, the retry mechanism for the unsatisfied REJ is incorrect. SR NONE / DTS TPO0h01641 Trace shows unrecogised frame is received the response is a FRMR, as it should be (see BAD). 18:29:26/739.4 1- RD D1 FRAME len=0002 flg=9999 D2 (01) DISC P/F=0 18:29:26/739.8 1- TD D1 FRAME len=0005 flg=9999 D2 (03) FRMR P/F=0 cmd=43 vr=007 vs=000 c/r=1 wxyz=0000 BAD! 18:29:27/378.0 1- RD D1 FRAME len=0002 flg=9999 D2 (01) DM P/F=0 Defect Description: PHNE_14011: SR NONE / DTS TPO0h01833 Firmware failures with FRAME and HDLCABM concurrently in use SR NONE / DTS TPO0h01640 2ch card transmits bad frame on link startup SR NONE / DTS TPO0h01755 hdlcabm sends REJ on I-frame with duplicate N(s) SR NONE / DTS TPO0h01641 frame reject cause information is bad on unknown frame type SR: 4701380667 Patch Files: /opt/acc/protocol/zx25.zrel /opt/acc/protocol/hdlcabm.zrel /opt/acc/z7200a/x25.zabs /opt/acc/z7200a/x25.zmap /opt/acc/z7350a/x25.zabs /opt/acc/z7350a/x25.zmap /opt/acc/z7400a/x25.zabs /opt/acc/z7400a/x25.zmap what(1) Output: /opt/acc/protocol/zx25.zrel: ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc /opt/acc/protocol/hdlcabm.zrel: ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc /opt/acc/z7200a/x25.zabs: ZCOM System Firmware (ROM) Rev 04.B 921106.1200 ACC Rel B.02.40 for B.10.20 PHNE_14011 z7200_snp.z8 0 ZCOM System Software (WMUX1) ACC Rel B.02.40 for B.10.20 PHNE_14011 wmux1.z80 ZCOM System Software (WMUX3) ACC Rel B.02.40 for B.10.20 PHNE_14011 wmux3.z80 CPU clock 16MHz ZCOM System Software (WMUX4) ACC Rel B.02.40 for B.10.20 PHNE_14011 wmux4.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 level1.z80 ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14011 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14011 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 pmenttab.z80 ZCOM System Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 umuxent.z80 /opt/acc/z7200a/x25.zmap: ZCOM System Firmware (ROM) Rev 04.B 921106.1200 ACC Rel B.02.40 for B.10.20 PHNE_14011 z7200_snp.z8 0 ZCOM System Software (WMUX1) ACC Rel B.02.40 for B.10.20 PHNE_14011 wmux1.z80 ZCOM System Software (WMUX3) ACC Rel B.02.40 for B.10.20 PHNE_14011 wmux3.z80 CPU clock 16MHz ZCOM System Software (WMUX4) ACC Rel B.02.40 for B.10.20 PHNE_14011 wmux4.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 level1.z80 ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14011 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14011 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 pmenttab.z80 ZCOM System Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 umuxent.z80 /opt/acc/z7350a/x25.zabs: ZCOM System Firmware (ROM) Rev 01.T5 ACC Rel B.02.40 for B.10.20 PHNE_14011 z7350_rom.z8 0 ZCOM Z7350A System Software ACC Rel B.02.40 for B.10.20 PHNE_14011 z7350_fw.z80 CPU clock 32MHz ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 level1.z80 ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14011 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14011 testprot_ius c.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 pmenttab.z80 /opt/acc/z7350a/x25.zmap: ZCOM System Firmware (ROM) Rev 01.T5 ACC Rel B.02.40 for B.10.20 PHNE_14011 z7350_rom.z8 0 ZCOM Z7350A System Software ACC Rel B.02.40 for B.10.20 PHNE_14011 z7350_fw.z80 CPU clock 32MHz ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 level1.z80 ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14011 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14011 testprot_ius c.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 pmenttab.z80 /opt/acc/z7400a/x25.zabs: ZCOM System Firmware (ROM) Rev 01.B5 ACC Rel B.02.40 for B.10.20 PHNE_14011 z7400_rom.z8 0 ZCOM Z7400A System Software ACC Rel B.02.40 for B.10.20 PHNE_14011 z7400_fw.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 level1.z80 ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14011 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14011 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 pmenttab.z80 /opt/acc/z7400a/x25.zmap: ZCOM System Firmware (ROM) Rev 01.B5 ACC Rel B.02.40 for B.10.20 PHNE_14011 z7400_rom.z8 0 ZCOM Z7400A System Software ACC Rel B.02.40 for B.10.20 PHNE_14011 z7400_fw.z80 ZCOM LEVEL1 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 level1.z80 ZCOM X.25 Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 zx25.z80 ZCOM X.25 Level 2 ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM HDLC ABM Protocol ACC Rel B.02.40 for B.10.20 PHNE_14011 abm.cpp ZCOM HDLC ABM State Tables Rev:1.12 971128.1444 ACC Rel B.02.40 for B.10.20 PHNE_14011 abmfsmtab.zi nc ZCOM Monitor Module ACC Rel B.02.40 for B.10.20 PHNE_14011 monitor.z80 ZCOM Port Diagnostic Module ACC Rel B.02.40 for B.10.20 PHNE_14011 testprot.z80 ZCOM Protocol Module Entry Point Table ACC Rel B.02.40 for B.10.20 PHNE_14011 pmenttab.z80 cksum(1) Output: 3082190157 43614 /opt/acc/protocol/zx25.zrel 1981855059 27910 /opt/acc/protocol/hdlcabm.zrel 3338783874 37618 /opt/acc/z7200a/x25.zabs 1079169507 5528 /opt/acc/z7200a/x25.zmap 1175421792 36896 /opt/acc/z7350a/x25.zabs 2649387123 4651 /opt/acc/z7350a/x25.zmap 166281072 37634 /opt/acc/z7400a/x25.zabs 2653268025 4560 /opt/acc/z7400a/x25.zmap Patch Conflicts: None Patch Dependencies: s700: 10.20: PHNE_13990 s800: 10.20: PHNE_13990 Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: None Patch Package Size: 260 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_14011 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_14011.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_14011.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_14011. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_14011.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_14011.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT Before installing this patch, use the following command to shutdown the ACC subsystem and kill the ACC daemons. /opt/acc/bin/zmasterd kill The above command kills any of the ACC daemons that are still running, including zmasterd, zx25d, watch, zmlog, zmon, and znode. The kernel will be regenerated and the system will reboot automatically during the patch installation.