Patch Name: PHNE_12189

Patch Description: s700_800 10.30 Mux and Pty Cumulative Patch

Creation Date: 97/08/18

Post Date:  97/09/03

Hardware Platforms - OS Releases:
	s700: 10.30
	s800: 10.30

Products: N/A

Filesets:
	OS-Core.CORE-KRN OS-Core.UX-CORE

Automatic Reboot?: Yes

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHNE_12189

Symptoms:
	PHNE_12189:
	1 VTIME parameter is not working correctly when asynchronous
	I/O is enabled - SIGIO is not being generated.

	2 Zmuxdiag does not support A2096A mux card.

Defect Description:
	PHNE_12189:
	1 VTIME parameter is not working correctly when asynchronous
	I/O is enabled - SIGIO is not being generated.
	Equivalent patches available with this fix:
	  PHNE_10601:
	  s700: 10.20
	  s800: 10.20

	  PHNE_10585:
	  s700: 10.10
	  s800: 10.10

	2 Enhanced zmuxdiag to support A2096A mux card.
	No equivalent patches currently available with this fix.

SR:
	1653207795

Patch Files:
	/usr/conf/lib/libhp-ux.a(hptt0.o)
	/usr/bin/zmuxdiag

what(1) Output:
	/usr/conf/lib/libhp-ux.a(hptt0.o):
		PATCH_10.30: hptt0.o  1.11.116.16  97/08/18  PHNE_12
			189
	/usr/bin/zmuxdiag:
		HP-PB/CIO async mux loopback diagnostic utility $Rev
			ision: 1.8.117.2 $

cksum(1) Output:
	2577970758 42520 /usr/conf/lib/libhp-ux.a(hptt0.o)
	3988660975 32768 /usr/bin/zmuxdiag

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches: None

Patch Package Size: 130 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHNE_12189

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHNE_12189.depot

	5b. For a homogeneous NFS Diskless cluster run swcluster on the
	    server to install the patch on the server and the clients:

		swcluster -i -b

	    This will invoke swcluster in the interactive mode and
	    force all clients to be shut down.

	    WARNING: All cluster clients must be shut down prior to the
		     patch installation.  Installing the patch while the
		     clients are booted is unsupported and can lead to
		     serious problems.

	    The swcluster command will invoke an swinstall session in which
	    you must specify:

		alternate root path  -  default is /export/shared_root/OS_700
		source depot path    -  /tmp/PHNE_12189.depot

	    To complete the installation, select the patch by choosing
	    "Actions -> Match What Target Has" and then "Actions -> Install"
	    from the Menubar.

	5c. For a heterogeneous NFS Diskless cluster:

		- run swinstall on the server as in step 5a to install
		  the patch on the cluster server.

		- run swcluster on the server as in step 5b to install
		  the patch on the cluster clients.

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHNE_12189.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	Warning: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHNE_12189.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHNE_12189.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None