Patch Name: PHNE_11507

Patch Description: s700_800 10.20 EISA 100Base-T B.10.20.01 cumulative patch

Creation Date: 97/06/30

Post Date:  97/07/12

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products:
	B5497AA_APZ EISA 100bt B.10.20.01
	J2781AA_APZ EISA 100bt B.10.20.01

Filesets:
	100BT-EISA-KRN.100BT-KRN,B.10.20.01

Automatic Reboot?: Yes

Status: General Superseded

Critical:
	Yes
	PHNE_11507: OTHER
		MAC Address change results in card not working
	PHNE_10145: OTHER
		ServiceGuard fails over EISA 100bt

Path Name: /hp-ux_patches/s700_800/10.X/PHNE_11507

Symptoms:
	PHNE_11507:
	The following symptoms correspond to the descriptions in
	the defect descriptions fields for PHNE_11507:
	Changing the MAC address on EISA 100BT card prevents further
	correct operation of the card.

	PHNE_10145:
	The following symptoms correspond to the descriptions in
	the defect descriptions fields for PHNE_10145:
	Failover does not work correctly in ServiceGuard.

Defect Description:
	PHNE_11507:
	The following defect description is for PHNE_11507:
	Although the command for MAC address change completed
	successfully, the change was registered only in the
	software data-structures and not in the card (hardware).

	PHNE_10145:
	The following defect description is for PHNE_10145:
	When the primary cable is disconnected, the secondary
	does not reflect UP state in lanscan to indicate the
	successful Failover of ServiceGuard.

SR:
	1653219378 4701347781

Patch Files:
	/usr/conf/lib/libbtlan0.a

what(1) Output:
	/usr/conf/lib/libbtlan0.a:
		FILESET EISA100BT: lib btlan0:  Version: A.10.20- PH
			NE_11507

cksum(1) Output:
	650417092 153988 /usr/conf/lib/libbtlan0.a

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
	PHNE_10145

Equivalent Patches: None

Patch Package Size: 210 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHNE_11507

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHNE_11507.depot

	5b. For a homogeneous NFS Diskless cluster run swcluster on the
	    server to install the patch on the server and the clients:

		swcluster -i -b

	    This will invoke swcluster in the interactive mode and
	    force all clients to be shut down.

	    WARNING: All cluster clients must be shut down prior to the
		     patch installation.  Installing the patch while the
		     clients are booted is unsupported and can lead to
		     serious problems.

	    The swcluster command will invoke an swinstall session in which
	    you must specify:

		alternate root path  -  default is /export/shared_root/OS_700
		source depot path    -  /tmp/PHNE_11507.depot

	    To complete the installation, select the patch by choosing
	    "Actions -> Match What Target Has" and then "Actions -> Install"
	    from the Menubar.

	5c. For a heterogeneous NFS Diskless cluster:

		- run swinstall on the server as in step 5a to install
		  the patch on the cluster server.

		- run swcluster on the server as in step 5b to install
		  the patch on the cluster clients.

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHNE_11507.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	Warning: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHNE_11507.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHNE_11507.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None