Patch Name: PHNE_10778 Patch Description: s700_800 10.01-[12]0 2.2X ACC Base FW (EISA) Patch Creation Date: 97/04/28 Post Date: 97/06/06 Hardware Platforms - OS Releases: s700: 10.01 10.10 10.20 s800: 10.01 10.10 10.20 Products: Z7401A 2.21 2.22 2.23; Z7402A 2.21 2.22 2.23 Filesets: ACC.ACC-FW,B.02.21,B.02.22,B.02.23 Automatic Reboot?: No Status: General Superseded Critical: Yes PHNE_10778: PANIC PHNE_9285: PANIC Path Name: /hp-ux_patches/s700_800/10.X/PHNE_10778 Symptoms: PHNE_10778: SR 4701349928 / DTS TPO0h01198: System panic or DMA timeout occurs occasionally during ACC start up while downloading EISA ACC card. PHNE_9288: No ACC Base FW (EISA) related symptoms for this patch. PHNE_9285: SR 4701344473 / DTS TPO0h00994: DMA timeouts and system panics can occur when the EISA ACC is used and the onboard LAN interface is busy on some D-class and C-class systems. PHNE_9284: No ACC Base FW (EISA) related symptoms for this patch. PHNE_9283: No ACC Base FW (EISA) related symptoms for this patch. PHNE_8991: No ACC Base FW (EISA) related symptoms for this patch. PHNE_8833: No ACC Base FW (EISA) related symptoms for this patch. Defect Description: PHNE_10778: SR 4701349928 / DTS TPO0h01198: The EISA ACC firmware was not checking for an empty fifo condition while using programmed I/O to read an immediate mode command from the hp-ux host. PHNE_9288: No ACC Base FW (EISA) related defects were fixed in this patch. PHNE_9285: SR 4701344473 / DTS TPO0h00994: The ACC firmware was not correctly setting up the logic which controls the data transfers from the EISA bus into the ACC card memory for host to card transfers. The logic would fail to stop writing to the ACC card memory when the data transfer over the EISA bus was paused. When the onboard LAN was busy, the transfers to the EISA ACC card could be slowed causing the problem to appear. PHNE_9284: No ACC Base FW (EISA) related defects were fixed in this patch. PHNE_9283: No ACC Base FW (EISA) related defects were fixed in this patch. PHNE_8991: No ACC Base FW (EISA) related defects were fixed in this patch. PHNE_8833: No ACC Base FW (EISA) related defects were fixed in this patch. SR: 4701349928 4701344473 Patch Files: /opt/acc/sys/z7400_fw.zrel /opt/acc/z7400a/loopback.zabs /opt/acc/z7400a/loopback.zmap what(1) Output: /opt/acc/sys/z7400_fw.zrel: ZCOM Z7400A System Software Rev 01.B 970428.0000 /opt/acc/z7400a/loopback.zabs: ZCOM System Firmware (ROM) Rev 01.B5 970416.1600 ZCOM Z7400A System Software Rev 01.B 970428.0000 ZCOM LEVEL1 protocol Rev 0.02 950207.0000 ZCOM Monitor module Rev 3.0 940706.1800 ZCOM Port diagnostic module Rev 2.2 950808.1200 ZCOM Protocol module entry point table 870406.1041 /opt/acc/z7400a/loopback.zmap: ZCOM System Firmware (ROM) Rev 01.B5 970416.1600 ZCOM Z7400A System Software Rev 01.B 970428.0000 ZCOM LEVEL1 protocol Rev 0.02 950207.0000 ZCOM Monitor module Rev 3.0 940706.1800 ZCOM Port diagnostic module Rev 2.2 950808.1200 ZCOM Protocol module entry point table 870406.1041 cksum(1) Output: 3328442204 39342 /opt/acc/sys/z7400_fw.zrel 3365689705 16620 /opt/acc/z7400a/loopback.zabs 287390384 1593 /opt/acc/z7400a/loopback.zmap Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: The EEPROM on the EISA ACC card must be updated according to the service note Z7400A-01 when this patch is installed. The download firmware provided in this patch can only be used with the updated version of the ACC EISA Boot Rom, part number Z7400-80011. Supersedes: PHNE_8833 PHNE_8991 PHNE_9283 PHNE_9284 PHNE_9285 PHNE_9288 Equivalent Patches: None Patch Package Size: 120 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_10778 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_10778.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_10778.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_10778. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_10778.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_10778.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT After installing this patch relink any custom firmware download files (.zabs) that have been created. The ACC subsystem must then be stopped and restarted using zmasterd in order to download the new firmware. IMPORTANT NOTE Patches PHNE_9284 and PHNE_9288 are being superseded by 5 patches and 4 patches respectively. PHNE_10778, PHNE_10814, PHNE_10910, PHNE_10911 and PHNE_10912 for PHNE_9284 2.21/10.01 ACC X.25 Bundle (EISA). PHNE_10778, PHNE_10814, PHNE_10815 and PHNE_10816 for PHNE_9288. 2.22/10.20 ACC X.25 Bundle (EISA). These new patches can be used together for the ACC X.25 Bundled Product (EISA) or they can be used individually as applicable for other ACC products. +---- | 10910 (Base Software) 2.21/10.01 PHNE_9284 ---+ 10911 (X.25 Protocol) (X.25 Bundle) | 10912 (X.25/9000 Support) | +-- | | 10778 (Base firmware) | | 10814 (X.25 firmware) +---- | 10815 (Base Software) 2.22/10.10 PHNE_9288 -----+ 10816 (X.25/9000 Support) (X.25 Bundle) +--