Patch Name: PHCO_22268

Patch Description: s700_800 10.20 Cumulative SAM/ObAM Patch

Creation Date: 01/03/26

Post Date:  01/05/07

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products: N/A

Filesets:
	InternetSrvcs.INETSVCS-BOOT SystemAdmin.OBAM-RUN
	SystemAdmin.SAM SystemAdmin.SAM-HELP

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHCO_22268

Symptoms:
	PHCO_22268:
	JAGac68864) Due to the switch in HP-UX from the JetDirect
	            printer utility to its replacement, JetAdmin,
	            the following error will appear:
	            Error : The HP JetDirect printer software is
	            not installed is not installed on your system
	            (neither the command "/opt/hpnp/admin/jetadmin"
	            nor the command "/usr/lib/hpnp/admin/hpnpcfg"
	            exist).
	JAGab32068) SAM does not allow a modem to be added with
	            hardware flow control.
	JAGac86890) When creating or extending a volume group,
		    if the default Physical extent size is
		    changed to a smaller value and the size
		    of the LUN is very large, SAM core dumps.
	JAGab75189) If you try to extend a logical volume in SAM
		    and the extend fails (for example, if
		    contiguous disk space is not available),
		    the file system associated with the logical
		    volume is left unmounted.
	JAGad03158) With SAM patch PHCO_19047 installed, SAM
		    reports "firmware does not support
		    identification of continuous access and
		    business copy usage" when accessing a
		    filesystem on an XP256 array.
	JAGad09989) Backup messages from fbackup are not being
		    mailed to the user.
	JAGac77749) A SAM utility writes to a public r/w/x file.
	JAGad16290) Whenever a kernel was built and installed
		    from the Kernel Configuration area, the
		    /stand/system and /stand/system.prev files
		    were created with the current umask, which
		    could be 0, leaving these files with an 0666
		    protection mask.
	JAGad14377) SAM -> Accounts for Users & Groups ->
	            Users -> <Select a user> -> Actions ->
	            Modify Group Membership
	            The groups listed for that user include groups
	            from other users.  This occurs when you have
	            multiple user names ending with the same
	            substring (ex: jane, maryjane).
	JAGad02387) The Backup and Recovery area does not show
		    the A4853A Tape Library as being available
		    for backups.
	JAGad13959) The Backup and Recovery area does not show
		    the HP C7200 Tape Library as being available
		    for backups.
	JAGad08284) If a C5687A or C5683A 40GB DDS Data
		    Compression Tape Drive is present on the
		    system, the Backup and Recovery area of SAM
		    may produce an error of the form:
	            SAM internal error:
	            The error handler has gotten the error code
		    1 of type NOTE with the associated strings:
		    16/5.3.0 HP C5683A
	JAGad26125) SAM -> Performance Monitors -> System Properties
	            does not display the correct CPU Version.
	JAGad26171) The C5683A and C7369A Ultrium 1 tape drives are
	            not recognized by SAM.  SAM does not let the
	            user create a custom device file with DDS3 or
	            DDS4 formats.
	JAGad32499) The following DLT libraries are misrepresented
	            as Magneto-Optical AutoChangers within SAM's
	            Disk Devices area.  They should not appear at
	            all in the Disk Devices area since they are
	            tape libraries.
	            C6280
	            C5153
	            A4846A
	            A4845A
	            A5617A
	            A6697A
	            A5713A
	            SAM also does not fully support the IBM
	            03590B11, C5713A, STK 9840, and Benchmark
	            DLT1 tape drives.
	JAGad29347) When either the HP SureStore E Disk System
		    FC60 or SC10 is connected to a system using
		    both of the system's SCSI ports, the "Disks
		    and File Systems" area of SAM lists the
		    available disks twice.
	JAGad25510) SAM will not allow the user to create a
		    file system larger than 128GB.
	JAGaa62283) While querying AutoRAID devices, temporary
		    device files are created in /var/tmp and
		    /var/sam.  They are not being cleaned up
		    after use.
	JAGad03367) SAM does not present a mount option for the HP
	            DVD-ROM.
	JAGaa61090) If a user/group is removed from the system and
	            has restricted SAM privileges, the privileges
	            are not removed.  If a new user/group is added
	            with the same name, the new user/group may
	            inadvertently receive the previous
	            user's/group's privileges.
	JAGab77793) SAM -> Performance Monitors -> System Properties
	            -> Networking In this screen, SAM should display
	            information about the primary LAN card (the one
	            mapped to the host's IP address).  Instead, it
	            may display information about another card.
	JAGaa61232) /var/sam/lock should not be world-writable.
	JAGad45070) SAM -> Disks and File Systems ->
	            Disk Devices/File Systems/Swap produces the
	            following messages:
	            =================================
	            UNEXPECTED EXIT: process LANG=C LC_ALL=C
	            /usr/sam/lbin/samx -C -p 3265 -s fs_sa_disk
	            /usr/sam/lib//fs.ui exited with a non-zero
	            exit status.
	            cpp: "/usr/sam/lib/C/pd.com.ui", line 71:
	            error 4068: Missing comma seperator between
	            parameters in macro "PD_ADD_TD".
	            cpp: "/usr/sam/lib/C/fs_ice.h", line 152:
	            error 4068: Missing comma seperator between
	            parameters in macro "PB_TEXT".
	            cpp: "/usr/sam/lib/C/fs_ice.h", line 166:
	            error 4068: Missing comma seperator between
	            parameters in macro "PB_TEXT2".
	            sam: Error: The cpp(1) command failed on file:
	            /usr/sam/lib/C/fs.ui.
	            =================================
	JAGad48165) The following model is not recognized in the
	            SAM System Properties area:
	            9000/785/B2600
	            As a result, messages like the following are
	            produced:
	            -------------------------------
	            Model B2600 not found in the models database
	            /usr/sam/lib/mo/sched.models or the file was
	            missing.
	            -------------------------------
	            and
	            -------------------------------
	            Previous messages indicate that one or more
	            errors occured in an attempt to retrieve
	            mo_sv_proc_sg information.
	            -------------------------------
	JAGad50027) When a user that is not root and does not have
	            Restricted SAM privileges tries to enter SAM,
	            a confusing message is presented:
	            -----------------------------------
	            The file "/var/sam/lock/lock_0" could not be
	            opened (errno = 13, "Permission denied").  This
	            file must be opened so this SAM session can be
	            locked.  Otherwise, other SAM sessions won't be
	            able to detect that this SAM session is running
	            on the system.
	JAGad48314) Support for the DLT8000 drive is not available
		    in 10.20.
	JAGad38933) SAM does not recognize the HP C7145/C7146
	            Autochangers as tape devices.  Instead, SAM
	            incorrectly identifies them as Magneto-Optical
	            disk autochangers on the list of available
	            backup devices.
	JAGad38934) SAM does not recognize the HP Surestore SDLT
	            220 tape drive on the list of available backup
	            devices.
	JAGad51168) Under SAM->Kernel Configuration->Configurable
		    Parameters, the value of 0x7fffffff is not
		    allowed as a valid value for shmmax, because
		    it is above the maximum value supported for
		    this tunable.  However, this is a "special"
		    value which causes shmmax to operate
		    automatically, and SAM needs to support it.

	PHCO_21844:
	JAGaa32724) SAM does not allow a network route to be
		    added.

	JAGac00100) When SAM is run on an NIS master server and
		    used to configure a slave server, several
		    problems result:
	            1.  ypservers map is built incorrectly - master
		        server is removed.
	            2.  ypservers map is built incorrectly - not
		        using key-value pairs.
	            3.  Count of Slave Servers Configured is
		        incorrect.

	JAGac42549) When using SAM to change the default route,
	            SAM is adding the resolved name instead of
		    the IP address into netconf .. also if the
		    name server is on a remote segment the DNS
		    name of the default route will be unresolvable
		    and then all name resolutions hang because the
		    default route cannot be added back in with SAM
		    and you can no longer reach the DNS name server.

	JAGac95556) No help is available in SAM for Gigabit network
	            cards.

	JAGad02687) When SAM writes the MAC address of a 100BT card
	            to the config file it can result in problems
		    like loss of connectivity.

	JAGad07730) If the tunable kernel parameter STRMSGSZ is less
	            than 4096, SAM's laninfo utility may exceed this
		    limit and produce the error message:
		    putmsg: Get PPA's failed:Result too large
		    (errno = 34)

	JAGad10885) SAM displays inverse values for the intr and
	            dev attributes of an NFS mount.

	JAGad14835) If the commented lines in the file /etc/ntp.conf
	            are removed, the NTP area of SAM eventually
		    produces the error:
	            ch_xntp:cannot mallock 280 byte;no change was
		    made: not enough space (errno=12)

	JAGad30269) In the GUI version of the "Configure LAN card"
	            screen, there are several blank fields present,
		    and it is not apparent that the user has to
		    scroll down to see fields at the bottom.  If
		    the user doesn't notice these fields and
		    selects "OK", an error message will appear:
		    The field "Internet Address:" is a required
		    field.  You must input valid information in
		    this field prior to performing the task.

	JAGad31673) SAM -> Networking and Communications ->
		    Network Interface Cards.  Select lan0 and
		    choose the "Disable" action.  Change the IP
		    address of lan0 via "Configure".  Incorrect
		    routing information referencing to the old
		    IP address remains.

	JAGad44753) 1) Enter SAM->Networking and Communications->
	               Network Interface Cards
	            2) Select a PCI Token Ring Card
	            3) From the Action Menu select Configure
	            4) Change the Autosense to OFF and Speed to
		       Half and click on OK
	            5) After coming back to the Main screen
		       again select the PCI Token Ring Card
	            6) From the Action Menu select Configure
	            7) The value of Autosense and speed does
		       not show the previously set values.

	PHCO_21186:
	1)  SAM does not support the PCI token ring interface card.
	2)  The user cannot configure the settings for Gigabit LAN
	    cards.
	3)  After using SAM to add an indirect automount to an
	    existing one and exiting SAM, both the new and previous
	    automounts become inaccessible when a SIGUSR1 signal is
	    sent to the automount daemon.
	4)  The Network Interface Cards configuration screen may
	    produce the message "ERROR: Invalid Duplex value for
	    interface" if the latest 100 Base T driver patches are
	    not installed.

	PHCO_19990:
	1)  SAM does not support PCI MUX product J3592A.
	2)  When adding diskless clients, SAM displays an error
	    when looking for the machine hpmcosfa.fc.hp.com.
	3)  SAM erases audit log records when audit log file
	    characteristics are changed.
	4)  When trying to add a printer to the SuperIO Parallel
	    interface, SAM does not see the parallel interface.
	    Sam displays a message "no parallel interface can be
	    found on the system".
	5)  There are several new kernel tunables and drivers
	    which SAM does not recognize.  These are listed in
	    the applicable screens as being "unknown".
	6)  When a new tape is used for backup, the backup succeeds
	    but fbackup returns a return code of 4.  SAM does not
	    currently recognize that as a success, and reports that
	    the backup failed.  Actually, it succeeded.
	7)  The maximum value that SAM enforces for the kernel
	    parameter semmns is wrong.  This needs to be corrected
	    to 32767.
	8)  When manually entering the baud rate for a new
	    terminal/modem, SAM core dumps.
	9)  SAM does not currently support the HP SureStore Disk
	    Array XP256.
	10) The disk list presented when adding a dump device from
	    the kernel configuration area shows disks which are
	    part of volume groups not named vg00.
	11) Filtering in the "Disks and File Systems" area doesn't
	    work as expected. Values are being filtered and sorted
	    alphabetically rather than numerically.

	PHCO_19046:
	- The postremove control script of the previous patch
	  (PHCO_18217) fails under certain circumstances when
	  the patch is part of a bundle being removed.
	- If PCI 100BT LAN cards are installed on the system,
	  the Network Interface Cards area may incorrectly
	  show some extra entries with obviously incorrect
	  fields (e.g. empty fields for "Card Type" and
	  "Card Name").  The actual cards present on the system
	  may be selected and operated on normally, although the
	  "Autoneg" and "Duplex Mode" fields in the Configure
	  action may not reflect the actual state of the card.
	- SAM lacks support for the HP SureStore E FC60 disk array.
	  It is identified only as "A5277A" on the list of disk
	  devices.
	- SAM doesn't recognize IDE floppy drives.
	- SAM doesn't recognize Mitsumi CD-ROM drives.

	PHCO_18217:
	- SAM does not have the capability to detect or configure
	  the 100BaseTx speed and duplex value for most 100BaseTx
	  drivers.
	- Audited events and system calls in SAM are not in sync
	  with what can actually be audited in HP-UX.
	- SAM doesn't know descriptions of some new kernel drivers.
	- SAM maintains its list of kernel driver dependencies in
	  a static text file, rather than parsing the master files
	  provided with the driver.
	- SAM catches min/max violations of tunable parameters and
	  fixes them to be in range automatically.  However,
	  currently SAM fixes both the current and planned values,
	  which causes these changes to be lost when a kernel is
	  rebuilt, and also keeps users from being able to modify
	  other parameters while this situation exists.
	- Problems may be encountered when applying the etw.tun and
	  otw.tun tuned parameter sets in SAM's kernel configuration
	  area.
	- SAM Disk Devices core dumps if it encounters a EMC array
	  with more than 2 hardware paths to a used LUN.
	- Some new models are not properly identified in SAM's
	  System Properties area.
	- When some non-core SAM filesets (such as
	  ATMSAM.ATMSAM-RUN and SX25-HPerf.SX25-HPERF-SAM)
	  are installed, previous SAM patches could leave WARNINGs
	  in the swagent.log file when being configured.

	PHCO_17871:
	- In the previous SAM patch, incorrect messages were
	  displayed in the Users and Groups area.
	- When Cold-Installing a bundle containing previous SAM
	  patches, the SAM patch configure script issued WARNING
	  messages.

	PHCO_17528:
	- SAM may print a new user's encrypted password to the
	  standard output.
	- Some Hitachi, Teac, and Panasonic CD-ROM drives may be
	  mis-identified by SAM's peripheral devices area.
	- SAM's System Properties area may report that your system
	  is not present in /usr/lib/sched.models.

	PHCO_16577:
	- SAM does not provide the proper tape densities for
	  DLT tape devices.
	- SAM Does Not Allow Input Of Variable Length Subnet Masks.
	- When removing a user, SAM does not remove files with names
	  containing special characters.
	- SAM treats the C1557A tape autochanger like a disk.
	- SAM backup and recovery enters an infinite loop when
	  encountering a C5177 DLT library.
	- SAM does not treat the Pioneer DVD-ROM as a disk device.
	- SAM allows use of a single LUN twice on AutoRAID devices
	  connected via a FibreChannel/SCSI Multiplexor.
	- SAM does not support the 4-port 100BaseT card.
	- A previous SAM patch, PHCO_13251, removed a fix introduced
	  in PHCO_12833 that prevented SAM from corrupting the
	  HP_BASET_DUPLEX field in /etc/rc.config.d/hpbasetconf

	PHCO_16344:
	- In some screens, SAM does not accept a full 15 characters
	  for IP addresses.
	- SAM can dump core when scanning ATM interfaces.
	- SAM users and groups area core dumps when PHCO_15465 is
	  installed.
	- SAM does not allow the character '-' in user and group
	  names.
	- SAM does not support the A5236A disk enclosure.
	- SAM's fiber channel driver definitions are inaccurate.
	- After installing PHCO_15785, SAM would abort when
	  attempting to configure SNAplus2.

	PHCO_15785:
	- When attmpting to install PHCO_15783, an error message
	  similar to the following is reported:
	  ERROR:   chown "root.-993"
	           "/var/tmp/AAAa18175/catalog/INDEX" failed.
	           Invalid argument (22).
	  ERROR:   The INDEX file on the source did not exist or
	           could not be read.
	  ERROR:   The target "/depots/patch/tmp/PHCO_15783.depot"
	           could not be opened. pid=18175 07/27/98
	           14:07:59 PDT

	PHCO_15783:
	- The samagent program does not work correctly.
	- SAM does not allow creation, modification, or removal of
	  users with names with a particular character.
	- Password change option is modified to change the user
	  password change  frequency.
	- SAM enforces an upper limit of 5 for the kernel tunable
	  'num_tachyon_adapters'
	- Support for the Icicle Kicker was added
	- When saving restricted privileges for users or groups,
	  selection of multiple users is disabled.
	- When setting the time to a year after 2037, an incorrect
	  error message is displayed.
	- SAM becomes very slow when manipulating large numbers of
	  HP DPS printers.

	PHCO_14888:
	- The trusted systems and networking areas of SAM are not
	  Year 2000 safe.
	- The SAM log viewer is not Year 2000 safe.

	PHCO_14639:
	- correct incorrect display of drive-side SCSI channel and
	  ID on CLARiiON arrays.
	- alternate device files were not created before a vgextend
	- anonymous FTP listed files with times one hour off
	- when the host is connected to only one controller in a
	  CLARiiON array with two working controllers SAM crashes
	  when trying to create a volume group
	- SAM will crash, hang, display incorrect info, or possibly,
	  work correctly when selecting C3400 disk array controller
	  on the Disk Devices OLE, choosing View More Info, and
	  then selecting the View Array Status button.
	- The FS area of SAM crashes when scanning for devices
	  after View More Info on a C3400 array (and other times,
	  too) on certain systems.
	- Running SAM on a Monochrome X-terminal results in selected
	  text areas being displayed as white-on-white or
	  black-on-black.

	PHCO_13251:
	- add complete parameter range-checking at all places where
	  a kernel parameter value can change
	- Modification of tuned parameter set application such that
	  device files are created when nstrpty and/or npty are
	  changed.
	- add AutoFS support.

	PHCO_12833:
	- SAM's kernel configuration area currently limits the
	  maximum value assignable to the kernel tunable "maxtsiz"
	  to 0x7B033000.  This patch modifies SAM to check all
	  values of maxtsiz against the correct maximum value
	  of 0x40000000.
	- SAM's kernel configuration area currently enforces a
	  maximum value of 1024 for the kernel tunable "shmmni".
	  This patch corrects SAM's handling of "shmmni" such
	  that it no longer enforces a maximum value.
	- Setting IP address with SAM corrupted HP_BASET_DUPLEX.
	- SAM fails to remove a user with large UID.

	PHCO_11982:
	- The Disks and File Systems and the Printers and Plotters
	  areas of SAM are incorrectly writing temporary files to
	  /var/tmp and /tmp.
	- SAM removes the tftp arguments in /etc/inetd.conf when
	  told to disable the boot server.
	- SAM's DHCP screens are unusable if prior 10.20 SAM patches
	  are installed.
	- Enabling the bootp server fails every other try.
	- The Kernel Configuration area of SAM cannot be used to add
	  a dump device with earlier SAM 10.20 patches installed.
	- SAM does not recognize the following devices for use as
	  backup mediums: C1537A, C1557A
	- Using SAM to configure the appropriate drivers for a
	  C1100G optical jukebox can result in a kernel that will
	  panic on D-class (and perhaps K-class) systems.
	- The Disks and File Systems area may show an inconsistent
	  number of paths to a device.
	- Add multipath support for FibreChannel EMC arrays.
	- SAM incorrectly reports that an LVM disk is using software
	  disk striping.

	PHCO_11824:
	- Problems with RAID3 binds and unbinds on C3400 disk array.

	PHCO_11740:
	- Some EMC luns are not correctly displayed in the devices
	  list.
	- The wrong number of paths to HP AutoRAID luns are
	  displayed.

	PHCO_11490:
	- Add support for C3400 disk array.

	PHCO_11361:
	- SAM does not see all networking cards.

	PHCO_10753:
	- The btlan3 lan driver name is not recognized.

	PHCO_9993:
	- SAM FAL does not properly display icons when in non-C
	  locale.
	- Memory leak:  As SAM executes tasks, it consumes more
	  memory.
	- Problems with sendmail site-hiding on NFS diskless
	  clients.
	- Assigning a local or physical HPDPS printer to a different
	  queue is sometimes incorrectly denied by SAM.
	- HPDPS spoolers, supervisors, and client are not started by
	  SAM in the user's locale.
	- SAM cannot be used to modify multi-valued attributes of
	  HPDPS objects.
	- SAM forces you to provide a value for an HPDPS printer
	  model value that is labelled as optional.
	- SAM creates multiple copies of the HPDPS system startup
	  file /etc/rc.config.d/pd.
	- Allow the following remote HPDPS actions when initiated
	  from a 10.30 system: add a physical printer, create a
	  spooler or supervisor, and start a previously stopped
	  spooler or supervisor.
	- SAM produces the following error when attempting to
	  configure remote logins: UNEXPECTED EXIT: process
	  /usr/sam/lbin/sam -C -p 3882 -s remote_login
	  /usr/sam/lib/security.ui exited with a non-zero exit
	  status.
	- SAM does not allow the entering of domain names with "."
	  in the screen Additional Boot Parameters.
	- SAM is not able to properly identify the NIS domain name
	  if it is enclosed in double quotes.
	- SAM shows duplicate filesets for the automounter.
	- SAM acts on commented lines in /etc/hosts.
	- SAM removes custom tftp entry from inetd.conf file when
	  enabling DHCP.
	- Primary swap information is missing in the status area.
	- SAM can't detect RAID level when multiple SCSI cascades
	  with differing numbers of LUNS are used.
	- SAM only allows HP AutoRAID disks in a Not Included state
	  to be listed.  The user is unable to view disks in a
	  Downed, Failed, Previously Used, Unsupported, or
	  Initialization Failed state.
	- Interactivate backups fail.
	- SAM has problems handling modems on trusted systems.
	- SAM was erroneously resetting a year in the range 2000-
	  2069 to a year in the range 1900-1969 in the Auditing and
	  Security Area.
	- SAM shows incomplete hardware paths for Fibre Channel.
	- Add SAM support for Fibre Channel.
	- Immediately after converting a system to trusted status,
	  it is impossible for a user to modify authorized users for
	  terminals and modems that were already configured when the
	  conversion occurred.
	- SAM was incorrectly writing temporary files to /var/tmp.
	- SAM displays the incorrect time during the first hour of
	  the day.
	- Add support for T600 systems.

	PHCO_9895:
	- Update of fs help for HP AutoRAID devices.
	- Functional changes to support HP AutoRAID devices.
	- A lan driver name is not recognized.

	PHCO_8133:
	- Certain parts of the Auditing and Security area are not
	  2000-safe.
	- The SAM Functional Area Launcher does not properly display
	  icons when in non-C locale.
	- An attempt to disable access for the user 'nobody' doesn't
	  result in the expected changes to /etc/exports.
	- Under Networking and Communications->NIS->Actions->Modify,
	  the "If Server Unavailable" box always comes up with the
	  "Wait for NIS Server" button activated even though the
	  /etc/rc.config.d/namesvrs file has the environment
	  variable WAIT_FOR_NIS_SERVER set to FALSE. The "Boot
	  Without NIS" button should be highlighted instead.
	- Restricted SAM user can change root's password.
	- When adding a terminal to an eisa mux, SAM calls mksf
	  with improper arguments, causing mksf to fail.
	- When adding a remote printer, SAM replaces an alias
	  entered for the remote system with the system's
	  fully-qualified domain name.
	- New lan cards btlan3, btlan4, btlan5 are not supported.

	PHCO_7814:
	- Driver spt0 is not supported.  The kernel config area of
	  SAM needs to recognize the spt0 driver for NIO SCSI
	  pass-through.
	- SAM tries to add floppy device files as LVM alternate
	  links for non-floppy devices on s800.
	- rmterm.sh sets permissions on /etc/inittab improperly.
	- Authorized login times strings can cause data corruption
	  on a trusted system.
	- SAM can hang when a user is removed from a trusted system.
	- When large portions of a cluster are down, cluster-wide
	  tasks fail and take forever.  Samagent hangs.
	- SAM does not detect printers that are already setup.
	- SAM reports the rebuild priority of an Edison array
	  incorrectly.
	- The password for user sam_exec (used for remote SAM admin)
	  can be discovered by unscrupulous users.
	- Binding RAID LUNs fail.
	- Regular expression handling is broken in all but the C
	  locale.
	- When running in a non-C locale and something was input
	  into a field that used the '|' symbol in the format, the
	  standard format error is displayed, even if the entered
	  data is valid.
	- /usr/sam/lbin/dns_make_cache relies on /bin -> /usr/bin
	  transition link.
	- NTP server configuration ignores aliases.
	- Support for GSC 100 Base TX & GSC 100 Base T4 is not
	  available.
	- ioparser.sh fix.
	- SAM has problems adding certain printers because it
	  calls mksf ambiguously.
	- The functional area launcher doesn't set localization
	  properly for the functional areas.
	- When adding a remote printer, SAM expands remote hostname
	  to a fully-qualified domain name which- causes problems.
	- SAM FAL does not properly display icons when in non-C
	  locale.
	- When building NIS maps, SAM terminates.
	- An attempt to disable access for the user 'nobody' doesn't
	  result in the expected changes to /etc/exports.
	- SAM doesn't parse quoted NIS_DOMAIN entries in
	  /etc/rc.config.d/namesvrs properly.
	- Logging of customized tasks overwrite the same log file.
	- Temporary files are written to a public-writable
	  directory.

	PHCO_7672:
	SAM coredumps when the SNA area of SAM is entered.

Defect Description:
	PHCO_22268:
	JAGac68864) SAM tries to use the path to the old
	            JetDirect utility.
	Resolution: SAM now uses the path to the new JetAdmin
	            utility.
	JAGab32068) SAM was always creating a modem with software
	            flow control.
	Resolution: SAM now has a toggle on the add modem screen
	            that allows for hardware flow control.
	JAGac86890) SAM was not properly handling the calculation
		    of the maximum number of physical extents.
	Resolution: Modified the calculation of the maximum number
		    of physical extents.  A note dialog appears
		    stating that the Maximum Number of Extents
		    and the Extent Size are incompatible, and
		    that SAM will adjust the values appropriately.
	JAGab75189) The code that handles a failure to extend
		    an LVM volume didn't do a remount of the
		    file system.
	Resolution: Modified SAM to remount the file system
		    if an error occurs while trying to extend
		    the file system.
	JAGad03158) If an HP SureStore Disk Array XP256 does not
	            have a firmware revision of at least
		    52-43-12, SAM displays an error message
		    for each XP256 LUN.
	Resolution: SAM now displays a more elaborate and
		    descriptive message when the firmware needs
		    to be updated in order to support Continuous
		    Access and Business Copy operations. Also,
		    SAM will only display the message once and
		    continue to populate the Disk Devices List
		    with the information that is available.
	JAGad09989) When SAM was converted from using temp files
		    in /usr/tmp, to /var/tmp, the emailing
		    mechanism was inadvertantly broken.
	Resolution: It has been fixed to behave as intended.
	JAGac77749) SAM utility was writing to a public r/w/x
		    file.
	Resolution: The file mode has been changed so only
		    the root user has r/w/x access.
	JAGad16290) The files were simply created without regard
		    for the current umask setting.
	Resolution: SAM has been modified to use the user's umask,
		    ORed with 0022.
	JAGad14377) SAM was using a logically incorrect search
	            string expression to search for usernames
	            in the  /etc/group file.
	Resolution: SAM now searches the for usernames in the
	            /etc/group file using a correct "egrep"
	            string. The new expression only finds exact
	            matches to the username and not substring
		    matches.
	JAGad02387) The new A4853A DLT Library is incorrectly
		    identified as an MO autochanger by default
		    (due to the schgr driver).  As a result,
		    the component DLT tapes within it are not
		    shown.
	Resolution: Added an entry for the A4853A to SAM's
		    pd_devinfo.tx file.
	JAGad13959) The HP C7200 DLT Library is incorrectly
		    identified as an MO autochanger by default
		    (due to the schgr driver).  As a result,
		    the component DLT tapes within it are not
		    shown.
	Resolution: Added an entry for the HP C7200 to SAM's
		    pd_devinfo.tx file.
	JAGad08284) SAM does not have entries in its devices
		    database for the C5683A or C5687A.
	Resolution: Added entries for the C5683A and C5687A
		    to pd_devinfo.tx.
	JAGad26125) SAM was using the uname(2) call to identify the
	            system model and processor type.  The returned
	            data is no longer unique for all systems.
	Resolution: SAM now uses information returned from the
	            model(1) command to identify the CPU Version.
	JAGad26171) SAM did not support the C5683A and C7369A
	            Ultrium 1 tape drives because they
	            are new devices introduced after 10.20.
	Resolution: SAM now allows the user to create a device
	            file with the DDS3 or DDS4 density formats
	            to support the C5683A tape drive.  SAM now
	            supports the C7369A Ultrium tape drive
	            through changes to both the Peripheral Devices
	            and Backup And Recovery areas.
	JAGad32499) These new tape devices were introduced after the
	            10.20 release of SAM.
	Resolution: Entries have been made in SAM's pd_devinfo.tx,
	            ioparser.sh, and tape_densities files to support
	            these devices.
	JAGad29347) When a disk device was connected to a host
		    using both host SCSI ports, SAM did not
		    properly "collapse" the two ioscan hardware
		    paths, instead listing each disk unit twice,
		    once for each SCSI port.
	Resolution: SAM lists each disk unit once for each hardware
		    path.
	JAGad25510) SAM was applying a limit of 128 GB on file
		    system size for both HFS and VxFS file systems.
	Resolution: SAM now enforces the correct limits for file
		    system size, 256 GB for HFS and 1024 GB for
		    VxFS.
	JAGaa62283) All AutoRAID routines in SAM were creating
		    device files but not unlinking them before
	            exit.
	Resolution: SAM now removes temporary device files after
		    they've been used.
	JAGad03367) SAM did not support the HP DVD-ROM because it
	            was introduced after 10.20.
	Resolution: An entry has been made in the pd_devinfo.tx to
	            support this device.
	JAGaa61090) When removing a user, SAM was not removing
	            the file containing the user's restricted-SAM
	            privileges.
	Resolution: SAM now removes /etc/sam/custom/<username>.cf
	            when a user is removed or
	            /etc/sam/custom/<groupname>.gp when a group
	            is removed.
	JAGab77793) In the System Properties area, the information
	            being displayed was for the last card listed by
	            the utility laninfo.  This card may not be
	            currently active when multiple cards are
	            present.
	Resolution: SAM now gets the IP address with gethostbyname()
	            and uses that information to match the output
	            of laninfo to obtain the station address.
	JAGaa61232) SAM allows non-root changes in /var/sam/lock,
	            which may affect SAM's behavior.
	Resolution: The directory mode has been changed to 755.
	JAGad45070) SAM was using cpp to expand a macro in which
	            one argument included a space.
	Resolution: SAM has eliminated the use of spaces in cpp
	            macro arguments.
	JAGad48165) This is a new model introduced after 10.20.
	Resolution: An entry for this model has been added to
	            SAM's sched.models file.
	JAGad50027) This is a result of the permissions of
	            /var/sam/lock being changed to 755 to address
	            the defect JAGaa61232.  This change caused
	            SAM to display the confusing message and
	            exit before encountering the former, less
	            confusing exit message.
	Resolution: An ID check has been added earlier in the
	            SAM start-up process.  If the user is neither
	            root nor has restricted SAM privileges, the
	            following message is displayed:
	            ----------------------------------------
	            Sorry, you must have superuser (root)
	            privilege to enter SAM.
	            ----------------------------------------
	JAGad48314) The DLT8000 tape drive did not exist when
		    10.20 was released.
	Resolution: Added an entry for the DLT8000 tape drive
		    in the pd_devinfo.tx file.
	JAGad38933) The C7145/C7146 Autochangers are new models
		    introduced after 10.20.
	Resolution: Entries for these autochangers have been
		    added to SAM's pd_devinfo.tx file.
	JAGad38934) The Surestore SDLT 220 is a new model
		    introduced after 10.20.
	Resolution: An entry for this tape drive has been added
		    to SAM's pd_devinfo.tx file.  In addition,
		    the new tape density that can be supported
		    by this device has been added to SAM's
		    tape_densities file.
	JAGad51168) SAM enforces the maximum value for shmmax,
		    precluding the use of the 0x7fffffff value.
	Resolution: Raise the maximum value for shmmax to
		    include 0x7fffffff.

	PHCO_21844:
	JAGaa32724) A string was not being initialized, causing the
	            route command to use a bad value when setting
		    network routes.
	Resolution: The string variable is being initialized.

	JAGac00100) The current hostname was not being used when
	            building the new map.
	Resolution: 1) The current hostname is no longer excluded
		       when building the ypservers map.
	            2) Both the key and the hostname are printed
		       to the ypservers.pag file.
	            3) The count of slave servers was changed
		       from "wc -w ypservers.pag" to "wc -l
		       ypservers.pag".

	JAGac42549) 1) If the user enters a hostname, SAM does
	               not check its validity before invoking
		       the route command.
		    2) SAM deletes the existing default gateway
		       before adding the new one.
	Resolution: 1) SAM makes sure the hostname is resolvable
	               to an IP address before invoking the route
		       command.
		    2) SAM now adds the new gateway before deleting
		       the old one.

	JAGac95556) When code support was added for Gigabit network
	            cards, the help entries for Gigabit
		    configuration options were not added.
	Resolution: The configuration options for Gigabit cards
	            is now available.

	JAGad02687) SAM writes the MAC address to the config file
	            regardless of whether the MAC address is being
		    changed.
	Resolution: SAM now queries the card to get both the current
	            and factory MAC addresses.  The config file will
		    be written only if the user-specified address is
		    different from the factory MAC address.

	JAGad07730) The dataptr argument to putmsg is exceeding
		    STRMSGSZ.
	Resolution: There is no reason to use the dataptr argument,
		    so it is now set to null.

	JAGad10885) Internal variables are being interpreted
	            incorrectly.
	Resolution: The interpretation of the intr and dev variables
	            is now fixed.

	JAGad14835) A termination condition in a while loop was
	            never being reached.
	Resolution: The while loop was fixed to ensure proper
	            termination.

	JAGad30269) The configurable options for all LAN cards was
	            placed into a single screen, causing empty space
		    to appear in the place of options for absent
		    cards.
	Resolution: The "Configure LAN Card" dialog has been
		    replicated so that no screen real estate need
		    be wasted on irrelevant options.

	JAGad31673) When an interface is disabled and reconfigured,
		    the old references are not being removed.
	Resolution: SAM now removes the references to the old IP
	            addresses.

	JAGad44753) SAM is calling the wrong init script and is
		    not updating the configuration file for the
		    PCI Token Ring card.
	Resolution: SAM's mapping of driver name to init script
		    name is now correct.

	PHCO_21186:
	1)  The PCI token ring interface card is a new product.
	Resolution:
	    Support has been added to SAM for configuring the
	    speed, duplex, and autosense settings for PCI
	    Token Ring cards.

	2)  Gigabit LAN is new hardware for which support did
	    not previously exist.
	Resolution:
	    SAM now provides support for displaying and setting
	    parameters like Speed, Duplex, Autoneg, Flow
	    control, MTU, Send Coalesce Ticks, Receive Coalesce
	    Ticks, Send Max Buffers, Receive Max Buffers and
	    Encapsulation for 1000BaseT and 1000BaseSX cards.

	3)  SAM was trying to retrieve an uninitialized data
	    structure.
	Resolution:
	    The data structure is now initialized before being
	    accessed.

	4)  SAM expects 100BaseT configuration scripts and the
	    driver-specific configuration files to be the
	    latest ones and sometimes generates error messages
	    which are confusing in certain cases.  This happens
	    when the driver support is incomplete.
	Resolution:
	    Before SAM configures the 100BaseT card, it checks
	    whether the driver-specific configuration file in
	    /etc/rc.config.d is the latest one.  Then it checks
	    whether the configuration script in /usr/sbin is
	    the latest one.  It gives appropriate error
	    messages if any one of these two is out of date.

	PHCO_19990:
	1)  While the PCI MUX card was supported in HP-UX 10.20,
	    SAM had not been modified to display it.
	2)  A local test machine name was inadvertently left in the
	    source code.
	3)  The previous behavior of the auditing commands required
	    that SAM remove the audit log files each time the audit
	    parameters were changed.  The auditing commands are now
	    able to continue writing into existing log files, but
	    SAM is still removing them, resulting in the loss of
	    the logs.
	4)  The SuperIO interface didn't exist when 10.20 SAM was
	    released.
	5)  These drivers and parameters are new.
	6)  The exit codes for fbackup have changed recently.
	7)  The definition for the maximum value of semmns was
	    changed.
	8)  SAM was calling the isspace() function in libc
	    incorrectly.  The old version of libc masked this,
	    but the new version does not.
	9)  The HP SureStore Disk Array XP256 was introduced
	    after the release of 10.20.
	10) A data structure describing the available disk sections
	    was being incorrectly initialized.
	11) A number of fields were using the default field type
	    definition in the user interface files, which is not
	    appropriate for numeric types.

	Resolution:
	1)  The appropriate source and configuration files have
	    been modified to allow SAM to manage the PCI MUX card.
	2)  The local test machine name has been removed from the
	    code.
	3)  SAM no longer removes the audit logs whenever the audit
	    parameters are changed.
	4)  SAM has been modified to recognize the SuperIO
	    interface.
	5)  The entries for the drivers asyncdsk_included, bpn,
	    fcp_cdio, lan0, lan1, onyxe, timi, and vme have been
	    added or updated.  The entries for the parameters
	    fcp_large_config, km_disable, ncsize, semmns, vx_ninode,
	    and vx_noifree have been added or updated.  Help for
	    these parameters will be provided in a future patch.
	6)  The script br_backup now handles fbackup's exit codes
	    properly.
	7)  The maximum value of semmns has been corrected to 32767
	    in params.tx.
	8)  SAM no longer relies on the old, tolerant interface to
	    the isspace() function in libc.
	9)  SAM has been modified to recognize and manage the HP
	    SureStore Disk Array XP256.
	10) The data structure describing the available disk
	    sections is now being reinitialized for this task.
	11) The field type for these numeric fields is now
	    explicitly defined as numeric so that filtering and
	    sorting is done properly.

	PHCO_19046:
	- Invalid assumptions about SD Installed Product
	  Database functions used in control scripts.
	Resolution:
	  Simplified control scripts.
	- Extraneous print statement was left in code.
	Resolution:
	  Removal of extraneous print statement.
	- The HP SureStore E FC60 disk array is a new device.
	Resolution:
	  Added support for the HP SureStore E FC60 disk array.
	- IDE drives are new devices.
	Resolution:
	  IDE drives are now recognized and mapped to the sioflop
	  driver.
	- Mitsumi CD-ROM drives are new devices.
	Resolution:
	  Mitsumi CD-ROM drives are now recognized and mapped to the
	  sdisk and disk3 drivers.

	PHCO_18217:
	- Setting speed and duplex values for 100BaseTx is new
	  functionality.
	Resolution:
	  enhancement
	- New functionality was added to HP-UX to get a list of
	  auditable events at run-time.  SAM has been enhanced to
	  use this functionality in audevent(1M) if available.
	Resolution:
	  enhancement
	- SAM's list of driver descriptions must be updated when
	  new drivers are introduced.
	Resolution:
	  Update /usr/sam/lib/kc/drivers.tx with descriptions of
	  new drivers.
	- SAM has been maintaining a static list of driver
	  dependencies.  This list was out of sync with the changing
	  kernel drivers.
	Resolution:
	  Modify SAM to obtain device driver dependency information
	  from the kernel master files.
	- Coding error.
	Resolution:
	  Modify SAM's behavious when paramater values are out of
	  range.
	- An error was introduced in previous versions of the
	  otw.tun and etw.tun files.
	Resolution:
	  Deliver corrected versions of otw.tun and etw.tun.
	- SAM assumed that no more than 2 hardware paths would ever
	  exist to a single used LUN.
	Resolution:
	  SAM was modified to no longer a maximum of two hardware
	  paths to a used LUN.
	- SAM's list of machine models must be updated when new
	  systems are introduced.
	Resolution:
	  Updated /usr/sam/lib/mo/sched.models
	- The patch configure script would incorrectly try to
	  register all .tm and .da files under /usr/sam/lib.
	Resolution:
	  The patch configure and postremove scripts has been
	  modified to register only files that belong to the
	  SystemAdmin.SAM fileset and then register directories that
	  are listed in /etc/sam/reg_dirs.db.

	PHCO_17871:
	- An error occured in build for the previous patch.
	Resolution:
	  Deliver the correct version of the ug.cat file.
	- A corner case only possible during a Cold-Install was not
	  correctly handled in the patch configure script.
	Resolution:
	  Remove /var/sam/boot.config in the configure script (if it
	  exists) rather than run getkinfo

	PHCO_17528:
	- Coding error.
	Resolution:
	  removed debuging code from effected source file.

	- New IDE interface CD-ROM drives.
	Resolution:
	  added descriptions for these devices to SAM's peripheral
	  devices hardware description files.

	- Enhancement.
	Resolution:
	  This patch includes a SAM-private version of the
	  sched.models file.

	PHCO_16577:
	- Coding errors.
	- Enhancements.
	- A source file was checked in using an incorrect tag for
	  PHCO_11982.

	PHCO_16344:
	- Coding errors.
	- Transformer support is new functionality.
	- The previous SAM patch was built incorrectly.

	PHCO_15785:
	- 10.20 SD cannot read depots which have catalog files with
	  gids of 171 (at least, possibly problems with anything
	  other than 3).  Depots with this characteristic can be
	  created with 11.00 SD when swpackage is run as root.

	PHCO_15783:
	- A corrupted /usr/sam/lbin/samagent executable was
	  delivered in PHCO_11982.
	- The '-' character was removed from the list of characters
	  allowed in user names
	- SAM sets the 'password last modified' date to the user's
	  creation date.
	- Information in the FCMS master file is incorrect.
	- Icicle Kicker support is a new feature
	- Coding error
	- The error message for setting an incorrect date was not
	  changed when the code verifying the date range was changed
	- An error in ioparser.sh was corrected.
	- The code implementing the DPS support in SAM poorly
	  handled large lists.

	PHCO_14888:
	- coding errors

	PHCO_14639:
	- workaround for effective C3400 firmware
	- coding errors

	PHCO_13251:
	- this patch adds new functionality only.

	PHCO_12833:
	- various coding errors.
	- SAM does not support duplex mode for the 100BaseT
	  interface.
	- incorrect files delivered in PHCO_7815.

	PHCO_11982:
	- insufficient testing on D-class systems.
	- incorrect source files were used in building earlier
	  10.20 patches.
	- features were obsoleted in 10.x but were not removed from
	  SAM.
	- various coding errors.

	PHCO_11824:
	- The sequencing and timing of RAID3 operations was being
	  handled incorrectly by SAM.

	PHCO_11740:
	- There was a problem porting functionality from 10.30
	  into 10.20.

	PHCO_11490:
	- C3400 disk array was not available when 10.20 was
	  originally released.

	PHCO_11361:
	- Files included in patch PHCO_10753 were erroneously not
	  included in PHCO_9993.

	PHCO_10753:
	- The btlan3 driver did not exist when 10.20 was released.

	PHCO_9993:
	- Client sendmail.cf files were created during diskless
	  client installation.
	- SAM was not using the default (LANG=C) files if no files
	  existed for the given setting of $LANG.
	- SAM was not releasing memory for objects when they were no
	  longer referenced.
	- SAM was not accounting for the case where an HPDPS spooler
	  has two queues and one is removed.
	- SAM was invoking the DPS daemon and supervisor with LANG=C
	  rather than with the user's current value of $LANG.
	- SAM was enclosing multi-valued attributes in single quotes
	- SAM was invoking the pdcreate command incorrectly when no
	  printer model was specified.
	- Remote HPDPS tasks were not supported when 10.20 released.
	- SAM was referencing a pointer to an object that was not
	  properly initialized.
	- A format statement was disallowing entry of ".".
	- SAM was not modified to account for a change in the way
	  the kernel reports swap information.
	- SAM configuration file did not contain entries for tape
	  drives DLT4000 and DLT7000.
	- SAM was not adding configured terminals to the Terminal
	  Control Database when a system was converted to trusted
	  status.
	- Incorrect handling of years beyond 1999.
	- Fibre Channel products were not available when 10.20 was
	  released.
	- T600 systems were not available when 10.20 was released.

	PHCO_9895:
	- The HP AutoRaid products became available after the
	  release of 10.20.

	PHCO_8133:
	- Various coding errors.
	- New lan cards btlan3, btlan4, btlan5 were added since the
	  previous patch.

	PHCO_7814:
	- Support for the spt0 driver was inadvertently left out.
	- SAM was using all the device files it found as alternate
	  paths to a device.
	- On a trusted system, the UG area of SAM allows you to
	  specify a sequence of days and times when the user is
	  allowed to log in to the system.  This sequence of days
	  and times is encoded and passed as a parameter to the
	  to the modprpw command.  Only 50 characters have been
	  allocated to store this string by the modprpw command
	  but the command does not check to make sure the parameter
	  passed in is valid.  Passing a string longer than 50
	  characters can result in data corruption.  It is possible
	  to select days and times in SAM (e.g.  if you select to
	  allow logging in during a different time period on each
	  of the seven days of the week) that create an encoded
	  string of more than 50 characters. SAM should disallow
	  any combination of days and times that results in a
	  string over 50 characters.
	- When removing a user on a trusted system, SAM's upusrfiles
	  command depended on the su command, which on a trusted
	  system would ask for a password, causing SAM to hang.
	- The incorrect use of pthread_mutex_lock() in a signal
	  handler caused a deadlock in a process.
	- SAM fails to initialize all variables and printers that
	  for a new printer, causing lpadmin to return only some
	  of the information on such printers.
	- The meaning of the rebuild priority on an Edison array
	  was incorrectly understood.
	- The password field for sam_exec should be changed so it
	  is not possible to log in as sam_exec.
	- In 10.20, the option of binding a Raid3 LUN was removed
	  from the menu because Raid3 is unsupported.  Not all
	  remnants of Raid3 code were removed.  There existed an
	  enumerated type which contained a RAID3 value.  This
	  caused all options which followed it to be off by one.
	  This is a problem for binding LUN's and associated error
	  reporting.
	- The significance of the '|' symbol in non-C locales was
	  overlooked.
	- A dependence on transition links was remained in the code.
	- Qualifying domain names interfered with the use of
	  aliases.
	- Support for GSC 100 Base TX & GSC 100 Base T4 was added
	  after the 10.20 release.
	- When building NIS maps, a SIGTERM is normally produced,
	  causing SAM to terminate.  This was fixed by adding
	  SIGTERM to a list of signals that are ignored while
	  commands are executing.
	- Customized task history is lost when the log file is
	  overwritten.

	PHCO_7672:
	The calling convention of one of SAM's partner APIs was
	not fully tested.  When called in a certain manner,
	SAM coredumps.

SR:
	4701379206 1653231613 1653183301 1653199950 5003362749
	1653189266 1653198390 5003337881 5003310169 5003337071
	5000716050 5003381467 5003385583 1653229237 1653192179
	5003397240 1653257196 5003409896 5003415208 5003421784
	4701395970 1653192179 5003397968 5003421289 5003436154
	1653255851 5003426288 5003439000 5003420257 1653279075
	5003441550 5003445395 1653294736 8606106139 5003462135
	8606128154 8606113469 8606125670 8606130666 8606133542
	8606138520 8606141522 8606145499 8606160950 8606162357
	8606175513 8606101834 8606102664 5003426460 8606101714
	5003461806 8606101281 8606108699 1653263095 8606104583
	8606103785 8606105201 8606106504 1653233411 5003421578
	5003387126 8606106237 8606107538 8606127318 8606127464
	8606129344 8606133242 8606134018 8606134227 8606139021
	8606140630 8606144619 8606145039 8606146947 8606156199
	8606156791 8606156837 8606160021 8606163183 8606169658
	8606169659 8606175830 8606178940 8606179089 8606180806
	8606181952

Patch Files:
	/usr/sbin/setup_bootp
	/usr/sbin/setup_tftp
	/usr/obam/lib/libobam.1
	/usr/newconfig/etc/sam/reg_da.db
	/usr/newconfig/etc/sam/reg_files.db
	/usr/newconfig/etc/sam/reg_tm.db
	/usr/sam/bin/chdhcptab
	/usr/sam/bin/cladd
	/usr/sam/bin/reconcile
	/usr/sam/bin/samlog_viewer
	/usr/sam/bin/samreg
	/usr/sam/lbin/autoopt
	/usr/sam/lbin/br_backup
	/usr/sam/lbin/br_is_backup
	/usr/sam/lbin/br_recover
	/usr/sam/lbin/ch_hostip
	/usr/sam/lbin/ch_rhosts
	/usr/sam/lbin/ch_xntp
	/usr/sam/lbin/chuidacl
	/usr/sam/lbin/cron_change
	/usr/sam/lbin/dareg
	/usr/sam/lbin/dg_bind
	/usr/sam/lbin/dg_chg_caching
	/usr/sam/lbin/dg_cont_info
	/usr/sam/lbin/dg_status
	/usr/sam/lbin/dg_unbind
	/usr/sam/lbin/dmconnect
	/usr/sam/lbin/dns_make_cache
	/usr/sam/lbin/get_C3586A_info
	/usr/sam/lbin/get_gr_mems
	/usr/sam/lbin/get_op_info
	/usr/sam/lbin/get_ttydevs
	/usr/sam/lbin/getkinfo
	/usr/sam/lbin/inittab
	/usr/sam/lbin/ioparser.sh
	/usr/sam/lbin/ipconn_load
	/usr/sam/lbin/kc_get_deps
	/usr/sam/lbin/laninfo
	/usr/sam/lbin/lpmgr
	/usr/sam/lbin/mkterm.sh
	/usr/sam/lbin/parse_dgconf
	/usr/sam/lbin/pd_ups_parse
	/usr/sam/lbin/rmfiles
	/usr/sam/lbin/rmterm.sh
	/usr/sam/lbin/rsam
	/usr/sam/lbin/samagent
	/usr/sam/lbin/samx
	/usr/sam/lbin/task_customize
	/usr/sam/lbin/tmgrx
	/usr/sam/lbin/tmreg
	/usr/sam/lbin/ug_area_vis
	/usr/sam/lbin/upgrpfiles
	/usr/sam/lbin/upusrfiles
	/usr/sam/lbin/xntp_val_key
	/usr/sam/lib/C/arch.cat
	/usr/sam/lib/C/boot.ui
	/usr/sam/lib/C/br.cat
	/usr/sam/lib/C/br_scr.cat
	/usr/sam/lib/C/chbootptab.cat
	/usr/sam/lib/C/com.cat
	/usr/sam/lib/C/com_scr.cat
	/usr/sam/lib/C/fal.cat
	/usr/sam/lib/C/fal.ui
	/usr/sam/lib/C/fal_custom.ui
	/usr/sam/lib/C/fal_scr.cat
	/usr/sam/lib/C/fs.cat
	/usr/sam/lib/C/fs.ui
	/usr/sam/lib/C/fs_addlvm.ui
	/usr/sam/lib/C/fs_df_defs.h
	/usr/sam/lib/C/fs_dg.ui
	/usr/sam/lib/C/fs_disk.h
	/usr/sam/lib/C/fs_ice.h
	/usr/sam/lib/C/fs_ice.ui
	/usr/sam/lib/C/fs_lv.h
	/usr/sam/lib/C/fs_mfs_sa.ui
	/usr/sam/lib/C/fs_op.ui
	/usr/sam/lib/C/fs_transformer.ui
	/usr/sam/lib/C/fs_vg.h
	/usr/sam/lib/C/kc.cat
	/usr/sam/lib/C/kc.ui
	/usr/sam/lib/C/kc_scr.cat
	/usr/sam/lib/C/mo.cat
	/usr/sam/lib/C/mo_scr.cat
	/usr/sam/lib/C/nia.ui
	/usr/sam/lib/C/pd.cat
	/usr/sam/lib/C/pd.com.ui
	/usr/sam/lib/C/pd_devinfo.tx
	/usr/sam/lib/C/pd_dfinfo.tx
	/usr/sam/lib/C/pd_scr.cat
	/usr/sam/lib/C/pm.cat
	/usr/sam/lib/C/pm_scr.cat
	/usr/sam/lib/C/rt.cat
	/usr/sam/lib/C/sam.lp.cat
	/usr/sam/lib/C/sam.ui
	/usr/sam/lib/C/sp.cat
	/usr/sam/lib/C/tm_ui1.h
	/usr/sam/lib/C/ts.cat
	/usr/sam/lib/C/ts.ui
	/usr/sam/lib/C/ug.cat
	/usr/sam/lib/C/ug.ui
	/usr/sam/lib/C/ug.ut.ui
	/usr/sam/lib/C/ug_scr.cat
	/usr/sam/lib/br/br.sl
	/usr/sam/lib/br/br.tm
	/usr/sam/lib/cluster/cl.tm
	/usr/sam/lib/diskless_def
	/usr/sam/lib/dps/com_tasks.tcl
	/usr/sam/lib/dps/dps.sl
	/usr/sam/lib/dps/dps.tm
	/usr/sam/lib/dps/interface.tcl
	/usr/sam/lib/dps/lookup_mgr.tcl
	/usr/sam/lib/dps/messages.tcl
	/usr/sam/lib/dps/pp_tasks.tcl
	/usr/sam/lib/dps/screen.tcl
	/usr/sam/lib/dps/servers.tcl
	/usr/sam/lib/dps/svr_tasks.tcl
	/usr/sam/lib/dps/tclIndex
	/usr/sam/lib/dps/ts_modify.tcl
	/usr/sam/lib/dps/ts_utils.tcl
	/usr/sam/lib/dps/util.tcl
	/usr/sam/lib/fal/fal.sl
	/usr/sam/lib/fal/fal.tm
	/usr/sam/lib/fs/fs.da
	/usr/sam/lib/fs/fs.sl
	/usr/sam/lib/fs/fs.tm
	/usr/sam/lib/fs/fs_com.sl
	/usr/sam/lib/kc/drivers.tx
	/usr/sam/lib/kc/kc.da
	/usr/sam/lib/kc/kc.sl
	/usr/sam/lib/kc/kc.tm
	/usr/sam/lib/kc/kc_com.sl
	/usr/sam/lib/kc/params.tx
	/usr/sam/lib/kc/subsys.tx
	/usr/sam/lib/kc/tuned/etw.tun
	/usr/sam/lib/kc/tuned/oltp_cli.tun
	/usr/sam/lib/kc/tuned/oltp_sa.tun
	/usr/sam/lib/kc/tuned/oltp_ser.tun
	/usr/sam/lib/kc/tuned/otw.tun
	/usr/sam/lib/libdb.sl
	/usr/sam/lib/libdm.sl
	/usr/sam/lib/libdmtask.sl
	/usr/sam/lib/librx.sl
	/usr/sam/lib/libsam.sl
	/usr/sam/lib/lp/lp.sl
	/usr/sam/lib/lp/lp.tm
	/usr/sam/lib/mo/mo.da
	/usr/sam/lib/mo/mo.sl
	/usr/sam/lib/mo/mo.tm
	/usr/sam/lib/mo/sched.models
	/usr/sam/lib/nnc/boot.sl
	/usr/sam/lib/nnc/nnc.da
	/usr/sam/lib/nnc/nnc.sl
	/usr/sam/lib/nnc/nnc.tm
	/usr/sam/lib/nnc/nnc_da_com.sl
	/usr/sam/lib/pd/pd.da
	/usr/sam/lib/pd/pd.sl
	/usr/sam/lib/pd/pd.tm
	/usr/sam/lib/pd/pd_comlib.sl
	/usr/sam/lib/pd/tape_densities
	/usr/sam/lib/pm/pm.tm
	/usr/sam/lib/ra/ra.sl
	/usr/sam/lib/ra/ra.tm
	/usr/sam/lib/rt/rt.tm
	/usr/sam/lib/sp/sp.sl
	/usr/sam/lib/tm/tm.da
	/usr/sam/lib/tm/tm.tm
	/usr/sam/lib/tm/tm_comlib.sl
	/usr/sam/lib/ts/ts.sl
	/usr/sam/lib/ts/ts.tm
	/usr/sam/lib/ug/ug.sl
	/usr/sam/lib/ug/ug.tm
	/usr/sam/lib/ug/ug_comlib.sl
	/usr/sbin/sam
	/usr/sam/help/C/FSactions.DisksOptArrays.hv
	/usr/sam/help/C/FSactions.DisksOptArrays.hvk
	/usr/sam/help/C/FSactions.DisksOptArrays00.ht
	/usr/sam/help/C/FStd.AddOptimuHotSpareDisk.hv
	/usr/sam/help/C/FStd.AddOptimuHotSpareDisk.hvk
	/usr/sam/help/C/FStd.AddOptimuHotSpareDisk00.ht
	/usr/sam/help/C/FStd.AllDisksStatus.hv
	/usr/sam/help/C/FStd.AllDisksStatus.hvk
	/usr/sam/help/C/FStd.AllDisksStatus00.ht
	/usr/sam/help/C/FStd.AnnotateDevice.hv
	/usr/sam/help/C/FStd.AnnotateDevice.hvk
	/usr/sam/help/C/FStd.AnnotateDevice00.ht
	/usr/sam/help/C/FStd.ArrayEnclosureStatus.hv
	/usr/sam/help/C/FStd.ArrayEnclosureStatus.hvk
	/usr/sam/help/C/FStd.ArrayEnclosureStatus00.ht
	/usr/sam/help/C/FStd.BindOptimusLUN.hv
	/usr/sam/help/C/FStd.BindOptimusLUN.hvk
	/usr/sam/help/C/FStd.BindOptimusLUN00.ht
	/usr/sam/help/C/FStd.ConfiguredOptimusLUNs.hv
	/usr/sam/help/C/FStd.ConfiguredOptimusLUNs.hvk
	/usr/sam/help/C/FStd.ConfiguredOptimusLUNs00.ht
	/usr/sam/help/C/FStd.DiskEnclosureStatus.hv
	/usr/sam/help/C/FStd.DiskEnclosureStatus.hvk
	/usr/sam/help/C/FStd.DiskEnclosureStatus00.ht
	/usr/sam/help/C/FStd.IdentifyDrives.hv
	/usr/sam/help/C/FStd.IdentifyDrives.hvk
	/usr/sam/help/C/FStd.IdentifyDrives00.ht
	/usr/sam/help/C/FStd.ModifyArrayAlias.hv
	/usr/sam/help/C/FStd.ModifyArrayAlias.hvk
	/usr/sam/help/C/FStd.ModifyArrayAlias00.ht
	/usr/sam/help/C/FStd.RemOptimuHotSpareDisk.hv
	/usr/sam/help/C/FStd.RemOptimuHotSpareDisk.hvk
	/usr/sam/help/C/FStd.RemOptimuHotSpareDisk00.ht
	/usr/sam/help/C/FStd.ReplaceLUN.hv
	/usr/sam/help/C/FStd.ReplaceLUN.hvk
	/usr/sam/help/C/FStd.ReplaceLUN00.ht
	/usr/sam/help/C/FStd.ViewEnclosureStatus.hv
	/usr/sam/help/C/FStd.ViewEnclosureStatus.hvk
	/usr/sam/help/C/FStd.ViewEnclosureStatus00.ht
	/usr/sam/help/C/FStd.ViewOptimusArrayStatus.hv
	/usr/sam/help/C/FStd.ViewOptimusArrayStatus.hvk
	/usr/sam/help/C/FStd.ViewOptimusArrayStatus00.ht
	/usr/sam/help/C/fs/fs.hv
	/usr/sam/help/C/fs/fs.hvk
	/usr/sam/help/C/fs/fs00.ht
	/usr/sam/help/C/fs/fs01.ht
	/usr/sam/help/C/graphics/bluecheck.pm.Z
	/usr/sam/help/C/graphics/bluelite.pm.Z
	/usr/sam/help/C/graphics/checklite.pm.Z
	/usr/sam/help/C/graphics/greencheck.pm.Z
	/usr/sam/help/C/graphics/greenlite.pm.Z
	/usr/sam/help/C/graphics/redcheck.pm.Z
	/usr/sam/help/C/graphics/redlite.pm.Z
	/usr/sam/help/C/graphics/transparent.pm.Z
	/usr/sam/help/C/graphics/whitelite.pm.Z
	/usr/sam/help/C/graphics/yellowlite.pm.Z
	/usr/sam/help/C/lp/lp.hv
	/usr/sam/help/C/lp/lp.hvk
	/usr/sam/help/C/lp/lp00.ht
	/usr/sam/help/C/lp/lp01.ht
	/usr/sam/help/C/nnc/nnc.hv
	/usr/sam/help/C/nnc/nnc.hvk
	/usr/sam/help/C/nnc/nnc00.ht

what(1) Output:
	/usr/sbin/setup_bootp:
		$Revision: 72.2 $
		SAM file editing library $Revision: 72.2 $
	/usr/sbin/setup_tftp:
		$Revision: 72.4.2.2 $
		SAM file editing library $Revision: 72.2 $
	/usr/obam/lib/libobam.1:
		Dialog Manager IDMuser.h Version 2.18i
		ObAM Version 4.1.8 OBAM4_1_8 product SysV.4 (build d
			ate: Thu Apr 23 17:19:03 MDT 1998)
	/usr/newconfig/etc/sam/reg_da.db:
		None
	/usr/newconfig/etc/sam/reg_files.db:
		$Header: /samsrc/fs/data/fs.tm 72.167.1.7 1999-11-01
			 06:05:40-07 hmgr Exp $
		$Revision: 72.10 $
	/usr/newconfig/etc/sam/reg_tm.db:
		None
	/usr/sam/bin/chdhcptab:
		$Revision: 72.1 $
	/usr/sam/bin/cladd:
		$Revision: 72.38.1.4 $
	/usr/sam/bin/reconcile:
		reconcile $Revision: 72.11 $
		SAM Infrastructure Version 2.0
	/usr/sam/bin/samlog_viewer:
		samlog_viewer $Revision: 72.22 $
		SAM Infrastructure Version 2.0 - 04/17/98 12:35:46
	/usr/sam/bin/samreg:
		samreg $Revision: 72.16.1.1 $
		SAM Infrastructure Version 2.0
	/usr/sam/lbin/autoopt:
		$Revision: 72.24.1.2 $
		SAM Infrastructure Version 2.0 - 04/17/98 12:35:46
		SAM file editing library $Revision: 72.2 $
	/usr/sam/lbin/br_backup:
		$Revision: 72.14.1.5 $
	/usr/sam/lbin/br_is_backup:
		$Header: /samsrc/br/execs/br_is_backup 72.3.1.1 2000
			-06-15 09:37:19-06 gates Exp $
	/usr/sam/lbin/br_recover:
		$Revision: 72.9.1.5 $
	/usr/sam/lbin/ch_hostip:
		$Revision: 72.7.1.1 $
		SAM file editing library $Revision: 72.2 $
	/usr/sam/lbin/ch_rhosts:
		$Revision: 72.7 $
	/usr/sam/lbin/ch_xntp:
		$Revision: 72.11.1.1 $
		SAM file editing library $Revision: 72.2 $
	/usr/sam/lbin/chuidacl:
		$Revision: 72.2 $
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lbin/cron_change:
		$Header: /samsrc/br/execs/cron_change 72.8.1.1 2000-
			06-15 09:38:42-06 gates Exp $
	/usr/sam/lbin/dareg:
		dareg $Revision: 72.6 $
		SAM Infrastructure Version 2.0 - 05/20/97 13:14:45
	/usr/sam/lbin/dg_bind:
		None
	/usr/sam/lbin/dg_chg_caching:
		None
	/usr/sam/lbin/dg_cont_info:
		None
	/usr/sam/lbin/dg_status:
		None
	/usr/sam/lbin/dg_unbind:
		None
	/usr/sam/lbin/dmconnect:
		dmconnect $Revision: 72.6 $
		SAM Infrastructure Version 2.0
	/usr/sam/lbin/dns_make_cache:
		None
	/usr/sam/lbin/get_C3586A_info:
		None
	/usr/sam/lbin/get_gr_mems:
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lbin/get_op_info:
		None
	/usr/sam/lbin/get_ttydevs:
		None
	/usr/sam/lbin/getkinfo:
		SAM Kernel Discovery Tool: getkinfo $Revision: 72.7
			$
	/usr/sam/lbin/inittab:
		$Revision: 72.12 $
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lbin/ioparser.sh:
		$Header: /samsrc/pd/execs/ioparser.sh 72.54.1.15 200
			1-03-07 10:31:18-07 pgrubb Exp $
	/usr/sam/lbin/ipconn_load:
		SAM - NNC ipconn_load $Revision: 72.2 $
		SAM file editing library $Revision: 72.2 $
		SAM Infrastructure Version 2.0 - 05/20/97 13:14:45
	/usr/sam/lbin/kc_get_deps:
		None
	/usr/sam/lbin/laninfo:
		$Revision: 72.20.1.18 $
	/usr/sam/lbin/lpmgr:
		$Header: lpmgr,v 72.30.1.2 97/08/05 13:16:23 hmgr Ex
			p $
	/usr/sam/lbin/mkterm.sh:
		$Revision: 72.20.1.2 $
	/usr/sam/lbin/parse_dgconf:
		None
	/usr/sam/lbin/pd_ups_parse:
		SAM Infrastructure Version 2.0 - 05/20/97 13:14:45
	/usr/sam/lbin/rmfiles:
		$Revision: 72.10.1.1 $
	/usr/sam/lbin/rmterm.sh:
		$Revision: 72.18.1.1 $
	/usr/sam/lbin/rsam:
		SAM Infrastructure Version 2.0 - 04/17/98 12:35:46
	/usr/sam/lbin/samagent:
		SAM Infrastructure Version sam10D_ic12E (build date:
			 09/10/96 09:04:25  build flags: -g -DDEBUG
			-DNLS)
		SAM file editing library $Revision: 72.2 $
	/usr/sam/lbin/samx:
		SAM Infrastructure Version 2.0 - 04/17/98 12:35:46
		SAM file editing library $Revision: 72.2 $
	/usr/sam/lbin/task_customize:
		task_customize $Revision: 72.11 $
		SAM Infrastructure Version 2.0
	/usr/sam/lbin/tmgrx:
		tmgrx: $Revision: 72.16 $ $Date: 96/03/08 15:26:38 $
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
		SAM file editing library $Revision: 72.2 $
		HP C++ HPCPLUSPLUS  A.10.08
	/usr/sam/lbin/tmreg:
		tmreg $Revision: 72.12 $
		SAM Infrastructure Version 2.0 - 05/20/97 13:14:45
	/usr/sam/lbin/ug_area_vis:
		ug_area_vis $Revision: 72.1 $
	/usr/sam/lbin/upgrpfiles:
		$Revision: 72.8 $
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lbin/upusrfiles:
		$Revision: 72.16 $
		SAM Infrastructure Version 2.0 - 10/22/97 13:24:21
	/usr/sam/lbin/xntp_val_key:
		SAM file editing library $Revision: 72.2 $
	/usr/sam/lib/C/arch.cat:
		None
	/usr/sam/lib/C/boot.ui:
		None
	/usr/sam/lib/C/br.cat:
		None
	/usr/sam/lib/C/br_scr.cat:
		None
	/usr/sam/lib/C/chbootptab.cat:
		None
	/usr/sam/lib/C/com.cat:
		None
	/usr/sam/lib/C/com_scr.cat:
		None
	/usr/sam/lib/C/fal.cat:
		None
	/usr/sam/lib/C/fal.ui:
		None
	/usr/sam/lib/C/fal_custom.ui:
		None
	/usr/sam/lib/C/fal_scr.cat:
		None
	/usr/sam/lib/C/fs.cat:
		None
	/usr/sam/lib/C/fs.ui:
		$Header: /samsrc/fs/data/fs.ui 72.136.1.6 2000-01-14
			 11:21:15-07 anncook Exp $ */
	/usr/sam/lib/C/fs_addlvm.ui:
		$Header: /samsrc/fs/data/fs_addlvm.ui 72.57.1.2 2000
			-10-20 14:03:37-06 rlj Exp $ */
	/usr/sam/lib/C/fs_df_defs.h:
		$Header: /samsrc/fs/data/fs_df_defs.h 72.136.1.1 199
			7-04-08 02:46:22-06 hmgr Exp $ */
	/usr/sam/lib/C/fs_dg.ui:
		$Header: fs_dg.ui,v 72.25.1.6 97/07/23 16:12:53 hmgr
			 Exp $
	/usr/sam/lib/C/fs_disk.h:
		$Header: /samsrc/fs/data/fs_disk.h 72.81.1.1 1998-09
			-04 08:51:58-06 hmgr Exp $ */
	/usr/sam/lib/C/fs_ice.h:
		$Header: /samsrc/fs/data/fs_ice.h 72.18.1.4 1998-06-
			16 05:37:53-06 hmgr Exp $
	/usr/sam/lib/C/fs_ice.ui:
		$Header: fs_ice.ui,v 72.31.1.4 98/07/02 14:04:12 hmg
			r Exp $
	/usr/sam/lib/C/fs_lv.h:
		$Header: /samsrc/fs/data/fs_lv.h 72.32.1.1 1997-04-0
			8 02:46:31-06 hmgr Exp $ */
	/usr/sam/lib/C/fs_mfs_sa.ui:
		$Header: /samsrc/fs/data/fs_mfs_sa.ui 72.73.1.1 2000
			-01-14 11:21:18-07 anncook Exp $ */
	/usr/sam/lib/C/fs_op.ui:
		$Header: fs_op.ui,v 73.29.1.1 99/08/05 10:36:35 hmgr
			 Exp $
	/usr/sam/lib/C/fs_transformer.ui:
		$Header: fs_transformer.ui,v 73.4.1.1 98/09/09 11:29
			:16 hmgr Exp $
	/usr/sam/lib/C/fs_vg.h:
		$Header: /samsrc/fs/data/fs_vg.h 72.37.1.1 1997-04-0
			8 02:46:47-06 hmgr Exp $ */
	/usr/sam/lib/C/kc.cat:
		None
	/usr/sam/lib/C/kc.ui:
		$Revision: 72.23.1.1 $ */
	/usr/sam/lib/C/kc_scr.cat:
		None
	/usr/sam/lib/C/mo.cat:
		None
	/usr/sam/lib/C/mo_scr.cat:
		None
	/usr/sam/lib/C/nia.ui:
		None
	/usr/sam/lib/C/pd.cat:
		None
	/usr/sam/lib/C/pd.com.ui:
		None
	/usr/sam/lib/C/pd_devinfo.tx:
		None
	/usr/sam/lib/C/pd_dfinfo.tx:
		None
	/usr/sam/lib/C/pd_scr.cat:
		None
	/usr/sam/lib/C/pm.cat:
		None
	/usr/sam/lib/C/pm_scr.cat:
		None
	/usr/sam/lib/C/rt.cat:
		None
	/usr/sam/lib/C/sam.lp.cat:
		None
	/usr/sam/lib/C/sam.ui:
		SAM 10.20 Patch PHCO_22268 - $Date: 2001-03-26 10:15
			:49-07 $ - Tag PHCO_22268 */
	/usr/sam/lib/C/sp.cat:
		None
	/usr/sam/lib/C/tm_ui1.h:
		None
	/usr/sam/lib/C/ts.cat:
		None
	/usr/sam/lib/C/ts.ui:
		None
	/usr/sam/lib/C/ug.cat:
		None
	/usr/sam/lib/C/ug.ui:
		$Revision: 72.118.1.4 $ */
	/usr/sam/lib/C/ug.ut.ui:
		$Revision: 72.22.1.2 $ */
	/usr/sam/lib/C/ug_scr.cat:
		None
	/usr/sam/lib/br/br.sl:
		None
	/usr/sam/lib/br/br.tm:
		$Header: /samsrc/br/h/br_errors.h 72.3 1994-05-17 09
			:24:13-06 hmgr Exp $       */
	/usr/sam/lib/cluster/cl.tm:
		$Revision: 72.14 $ */
		$Revision: 72.6 $ */
		$Header: /samsrc/h/ar_errors.h 72.1 1994-01-13 09:44
			:03-07 hmgr Exp $        */
	/usr/sam/lib/diskless_def:
		$Revision: 72.14.1.1 $
	/usr/sam/lib/dps/com_tasks.tcl:
		None
	/usr/sam/lib/dps/dps.sl:
		None
	/usr/sam/lib/dps/dps.tm:
		$Revision: 72.3.1.4 $ */
	/usr/sam/lib/dps/interface.tcl:
		None
	/usr/sam/lib/dps/lookup_mgr.tcl:
		None
	/usr/sam/lib/dps/messages.tcl:
		None
	/usr/sam/lib/dps/pp_tasks.tcl:
		None
	/usr/sam/lib/dps/screen.tcl:
		None
	/usr/sam/lib/dps/servers.tcl:
		None
	/usr/sam/lib/dps/svr_tasks.tcl:
		None
	/usr/sam/lib/dps/tclIndex:
		None
	/usr/sam/lib/dps/ts_modify.tcl:
		None
	/usr/sam/lib/dps/ts_utils.tcl:
		None
	/usr/sam/lib/dps/util.tcl:
		None
	/usr/sam/lib/fal/fal.sl:
		None
	/usr/sam/lib/fal/fal.tm:
		$Header: /samsrc/fal/h/fal_errmsg.h 72.76 1996-01-29
			 06:36:03-07 hmgr Exp $        */
		$Header: /samsrc/fal/h/fal_errors.h 72.11 1995-04-10
			 12:18:08-06 hmgr Exp $    */
	/usr/sam/lib/fs/fs.da:
		None
	/usr/sam/lib/fs/fs.sl:
		None
	/usr/sam/lib/fs/fs.tm:
		$Header: /samsrc/fs/h/fs_errors.h 72.299.1.9 1999-12
			-22 17:29:36-07 anncook Exp $     */
		$Header: /samsrc/fs/data/fs.tm 72.167.1.7 1999-11-01
			 06:05:40-07 hmgr Exp $
	/usr/sam/lib/fs/fs_com.sl:
		None
	/usr/sam/lib/kc/drivers.tx:
		$Header: /samsrc/kc/data/drivers.tx 72.38.1.9 2000-0
			3-03 09:01:52-07 gates Exp $
	/usr/sam/lib/kc/kc.da:
		None
	/usr/sam/lib/kc/kc.sl:
		None
	/usr/sam/lib/kc/kc.tm:
		$Header: /samsrc/kc/h/kc_errors.h 72.12.1.1 1997-12-
			16 12:02:39-07 hmgr Exp $  */
		$Header: /samsrc/kc/h/kc_log.h 72.18.1.1 1997-12-16
			12:04:11-07 hmgr Exp $     */
	/usr/sam/lib/kc/kc_com.sl:
		None
	/usr/sam/lib/kc/params.tx:
		$Header: /samsrc/kc/data/params.tx 72.41.1.6 2001-02
			-27 10:12:16-07 gates Exp $
	/usr/sam/lib/kc/subsys.tx:
		$Header: subsys700.tx,v 72.10.1.1 98/09/08 10:42:10
			hmgr Exp $
	/usr/sam/lib/kc/tuned/etw.tun:
		None
	/usr/sam/lib/kc/tuned/oltp_cli.tun:
		None
	/usr/sam/lib/kc/tuned/oltp_sa.tun:
		None
	/usr/sam/lib/kc/tuned/oltp_ser.tun:
		None
	/usr/sam/lib/kc/tuned/otw.tun:
		None
	/usr/sam/lib/libdb.sl:
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lib/libdm.sl:
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lib/libdmtask.sl:
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lib/librx.sl:
		SAM Infrastructure Version 2.0 - 11/13/96 10:42:14
	/usr/sam/lib/libsam.sl:
		SAM Infrastructure Version 2.0 - 05/20/97 13:14:45
		SAM Infrastructure Version 2.0 - 05/20/97 13:14:45
	/usr/sam/lib/lp/lp.sl:
		None
	/usr/sam/lib/lp/lp.tm:
		$Header: /samsrc/lp/h/lp_defs.h 72.88.1.3 1999-07-21
			 03:12:11-06 hmgr Exp $    */
		$Header: /samsrc/lp/h/lp_err.h 72.21 1995-08-28 09:2
			8:49-06 hmgr Exp $         */
		$Header: /samsrc/h/ar_errors.h 72.1 1994-01-13 09:44
			:03-07 hmgr Exp $        */
	/usr/sam/lib/mo/mo.da:
		$Header: /samsrc/mo/data/mo.da 72.1 1995-12-07 04:56
			:49-07 hmgr Exp $ */
	/usr/sam/lib/mo/mo.sl:
		None
	/usr/sam/lib/mo/mo.tm:
		$Header: /samsrc/mo/data/mo_defs_tm.h 72.2.1.1 2000-
			08-24 12:57:20-06 tkopren Exp $ */
		$Header: /samsrc/mo/h/mo_errs.h 72.2.1.3 2001-01-09
			11:16:17-07 tkopren Exp $ */
	/usr/sam/lib/mo/sched.models:
		$Header: /samsrc/mo/data/sched.models 73.13.1.1 2001
			-01-30 16:16:12-07 tkopren Exp $ */
	/usr/sam/lib/nnc/boot.sl:
		None
	/usr/sam/lib/nnc/nnc.da:
		None
	/usr/sam/lib/nnc/nnc.sl:
		SAM - NNC $Revision: 72.2 $
	/usr/sam/lib/nnc/nnc.tm:
		$Header: /samsrc/nnc/h/nnc_msgs.h 72.51.2.9 2000-05-
			03 05:53:52-06 samiso Exp $
	/usr/sam/lib/nnc/nnc_da_com.sl:
		None
	/usr/sam/lib/pd/pd.da:
		None
	/usr/sam/lib/pd/pd.sl:
		None
	/usr/sam/lib/pd/pd.tm:
		$Header: /samsrc/pd/h/pd_err.h 72.9.1.2 1999-12-09 0
			8:13:26-07 hmgr Exp $ */
		$Header: /samsrc/h/ar_errors.h 72.1 1994-01-13 09:44
			:03-07 hmgr Exp $        */
	/usr/sam/lib/pd/pd_comlib.sl:
		None
	/usr/sam/lib/pd/tape_densities:
		None
	/usr/sam/lib/pm/pm.tm:
		None
	/usr/sam/lib/ra/ra.sl:
		None
	/usr/sam/lib/ra/ra.tm:
		$Header: /samsrc/ra/h/ra_errmsg.h 72.12 1994-10-07 0
			9:59:31-06 hmgr Exp $        */
		$Header: /samsrc/ra/h/ra_errors.h 72.4 1994-09-29 06
			:54:45-06 hmgr Exp $       */
	/usr/sam/lib/rt/rt.tm:
		None
	/usr/sam/lib/sp/sp.sl:
		None
	/usr/sam/lib/tm/tm.da:
		None
	/usr/sam/lib/tm/tm.tm:
		None
	/usr/sam/lib/tm/tm_comlib.sl:
		None
	/usr/sam/lib/ts/ts.sl:
		None
	/usr/sam/lib/ts/ts.tm:
		$Header: /samsrc/ts/h/ts_err.h 72.22 1994-10-21 10:5
			0:17-06 hmgr Exp $        */
	/usr/sam/lib/ug/ug.sl:
		None
	/usr/sam/lib/ug/ug.tm:
		$Header: /samsrc/ug/h/ug_errmsg.h 72.124.1.3 1996-12
			-05 05:02:17-07 hmgr Exp $         */
		$Header: /samsrc/ug/h/ug_errors.h 72.36 1996-04-12 0
			9:41:30-06 hmgr Exp $      */
	/usr/sam/lib/ug/ug_comlib.sl:
		None
	/usr/sbin/sam:
		$Revision: 72.42.1.1 $
	/usr/sam/help/C/FSactions.DisksOptArrays.hv:
		None
	/usr/sam/help/C/FSactions.DisksOptArrays.hvk:
		None
	/usr/sam/help/C/FSactions.DisksOptArrays00.ht:
		None
	/usr/sam/help/C/FStd.AddOptimuHotSpareDisk.hv:
		None
	/usr/sam/help/C/FStd.AddOptimuHotSpareDisk.hvk:
		None
	/usr/sam/help/C/FStd.AddOptimuHotSpareDisk00.ht:
		None
	/usr/sam/help/C/FStd.AllDisksStatus.hv:
		None
	/usr/sam/help/C/FStd.AllDisksStatus.hvk:
		None
	/usr/sam/help/C/FStd.AllDisksStatus00.ht:
		None
	/usr/sam/help/C/FStd.AnnotateDevice.hv:
		None
	/usr/sam/help/C/FStd.AnnotateDevice.hvk:
		None
	/usr/sam/help/C/FStd.AnnotateDevice00.ht:
		None
	/usr/sam/help/C/FStd.ArrayEnclosureStatus.hv:
		None
	/usr/sam/help/C/FStd.ArrayEnclosureStatus.hvk:
		None
	/usr/sam/help/C/FStd.ArrayEnclosureStatus00.ht:
		None
	/usr/sam/help/C/FStd.BindOptimusLUN.hv:
		None
	/usr/sam/help/C/FStd.BindOptimusLUN.hvk:
		None
	/usr/sam/help/C/FStd.BindOptimusLUN00.ht:
		None
	/usr/sam/help/C/FStd.ConfiguredOptimusLUNs.hv:
		None
	/usr/sam/help/C/FStd.ConfiguredOptimusLUNs.hvk:
		None
	/usr/sam/help/C/FStd.ConfiguredOptimusLUNs00.ht:
		None
	/usr/sam/help/C/FStd.DiskEnclosureStatus.hv:
		None
	/usr/sam/help/C/FStd.DiskEnclosureStatus.hvk:
		None
	/usr/sam/help/C/FStd.DiskEnclosureStatus00.ht:
		None
	/usr/sam/help/C/FStd.IdentifyDrives.hv:
		None
	/usr/sam/help/C/FStd.IdentifyDrives.hvk:
		None
	/usr/sam/help/C/FStd.IdentifyDrives00.ht:
		None
	/usr/sam/help/C/FStd.ModifyArrayAlias.hv:
		None
	/usr/sam/help/C/FStd.ModifyArrayAlias.hvk:
		None
	/usr/sam/help/C/FStd.ModifyArrayAlias00.ht:
		None
	/usr/sam/help/C/FStd.RemOptimuHotSpareDisk.hv:
		None
	/usr/sam/help/C/FStd.RemOptimuHotSpareDisk.hvk:
		None
	/usr/sam/help/C/FStd.RemOptimuHotSpareDisk00.ht:
		None
	/usr/sam/help/C/FStd.ReplaceLUN.hv:
		None
	/usr/sam/help/C/FStd.ReplaceLUN.hvk:
		None
	/usr/sam/help/C/FStd.ReplaceLUN00.ht:
		None
	/usr/sam/help/C/FStd.ViewEnclosureStatus.hv:
		None
	/usr/sam/help/C/FStd.ViewEnclosureStatus.hvk:
		None
	/usr/sam/help/C/FStd.ViewEnclosureStatus00.ht:
		None
	/usr/sam/help/C/FStd.ViewOptimusArrayStatus.hv:
		None
	/usr/sam/help/C/FStd.ViewOptimusArrayStatus.hvk:
		None
	/usr/sam/help/C/FStd.ViewOptimusArrayStatus00.ht:
		None
	/usr/sam/help/C/fs/fs.hv:
		None
	/usr/sam/help/C/fs/fs.hvk:
		None
	/usr/sam/help/C/fs/fs00.ht:
		None
	/usr/sam/help/C/fs/fs01.ht:
		None
	/usr/sam/help/C/graphics/bluecheck.pm.Z:
		None
	/usr/sam/help/C/graphics/bluelite.pm.Z:
		None
	/usr/sam/help/C/graphics/checklite.pm.Z:
		None
	/usr/sam/help/C/graphics/greencheck.pm.Z:
		None
	/usr/sam/help/C/graphics/greenlite.pm.Z:
		None
	/usr/sam/help/C/graphics/redcheck.pm.Z:
		None
	/usr/sam/help/C/graphics/redlite.pm.Z:
		None
	/usr/sam/help/C/graphics/transparent.pm.Z:
		None
	/usr/sam/help/C/graphics/whitelite.pm.Z:
		None
	/usr/sam/help/C/graphics/yellowlite.pm.Z:
		None
	/usr/sam/help/C/lp/lp.hv:
		None
	/usr/sam/help/C/lp/lp.hvk:
		None
	/usr/sam/help/C/lp/lp00.ht:
		None
	/usr/sam/help/C/lp/lp01.ht:
		None
	/usr/sam/help/C/nnc/nnc.hv:
		None
	/usr/sam/help/C/nnc/nnc.hvk:
		None
	/usr/sam/help/C/nnc/nnc00.ht:
		None

cksum(1) Output:
	625519944 36864 /usr/sbin/setup_bootp
	424552932 45056 /usr/sbin/setup_tftp
	3562175286 1081344 /usr/obam/lib/libobam.1
	3737885776 2387 /usr/newconfig/etc/sam/reg_da.db
	308602610 6431 /usr/newconfig/etc/sam/reg_files.db
	1326912145 29145 /usr/newconfig/etc/sam/reg_tm.db
	705530359 32768 /usr/sam/bin/chdhcptab
	3289338207 45863 /usr/sam/bin/cladd
	1474737521 2259 /usr/sam/bin/reconcile
	1530227182 53248 /usr/sam/bin/samlog_viewer
	1799562073 13446 /usr/sam/bin/samreg
	8650309 94208 /usr/sam/lbin/autoopt
	3567271409 16142 /usr/sam/lbin/br_backup
	1786726952 1435 /usr/sam/lbin/br_is_backup
	46801005 8464 /usr/sam/lbin/br_recover
	1086292140 45056 /usr/sam/lbin/ch_hostip
	3571693979 24576 /usr/sam/lbin/ch_rhosts
	378054619 61440 /usr/sam/lbin/ch_xntp
	2444468413 24576 /usr/sam/lbin/chuidacl
	843853875 8927 /usr/sam/lbin/cron_change
	4193048767 163840 /usr/sam/lbin/dareg
	4029784670 196608 /usr/sam/lbin/dg_bind
	4029784670 196608 /usr/sam/lbin/dg_chg_caching
	4029784670 196608 /usr/sam/lbin/dg_cont_info
	4029784670 196608 /usr/sam/lbin/dg_status
	4029784670 196608 /usr/sam/lbin/dg_unbind
	1547926944 7973 /usr/sam/lbin/dmconnect
	1274905607 874 /usr/sam/lbin/dns_make_cache
	3585138946 12708 /usr/sam/lbin/get_C3586A_info
	2842679758 32768 /usr/sam/lbin/get_gr_mems
	4071228719 3715 /usr/sam/lbin/get_op_info
	2362237463 16384 /usr/sam/lbin/get_ttydevs
	1544779024 262144 /usr/sam/lbin/getkinfo
	3458664089 24576 /usr/sam/lbin/inittab
	503026947 24670 /usr/sam/lbin/ioparser.sh
	1547575810 36864 /usr/sam/lbin/ipconn_load
	3442368843 16384 /usr/sam/lbin/kc_get_deps
	3911162312 24576 /usr/sam/lbin/laninfo
	733096008 145793 /usr/sam/lbin/lpmgr
	4012534207 9682 /usr/sam/lbin/mkterm.sh
	787406029 16384 /usr/sam/lbin/parse_dgconf
	3698026848 32768 /usr/sam/lbin/pd_ups_parse
	3023657225 1990 /usr/sam/lbin/rmfiles
	1252295352 2728 /usr/sam/lbin/rmterm.sh
	396887813 20480 /usr/sam/lbin/rsam
	3424563117 278528 /usr/sam/lbin/samagent
	2587487746 262144 /usr/sam/lbin/samx
	3664018817 5813 /usr/sam/lbin/task_customize
	3742846490 270336 /usr/sam/lbin/tmgrx
	1037641545 126976 /usr/sam/lbin/tmreg
	3071242336 200704 /usr/sam/lbin/ug_area_vis
	863328356 40960 /usr/sam/lbin/upgrpfiles
	2738219279 40960 /usr/sam/lbin/upusrfiles
	3738792123 28672 /usr/sam/lbin/xntp_val_key
	1081269703 32924 /usr/sam/lib/C/arch.cat
	2867714257 51922 /usr/sam/lib/C/boot.ui
	3420007892 12361 /usr/sam/lib/C/br.cat
	3303082427 4637 /usr/sam/lib/C/br_scr.cat
	1848188865 4376 /usr/sam/lib/C/chbootptab.cat
	3143360230 2391 /usr/sam/lib/C/com.cat
	1332896152 2123 /usr/sam/lib/C/com_scr.cat
	853542590 15870 /usr/sam/lib/C/fal.cat
	2666085236 15944 /usr/sam/lib/C/fal.ui
	1628019815 25114 /usr/sam/lib/C/fal_custom.ui
	2784299727 1801 /usr/sam/lib/C/fal_scr.cat
	726349581 102092 /usr/sam/lib/C/fs.cat
	1344628023 44929 /usr/sam/lib/C/fs.ui
	1803595095 21392 /usr/sam/lib/C/fs_addlvm.ui
	1586282976 72848 /usr/sam/lib/C/fs_df_defs.h
	874737758 136340 /usr/sam/lib/C/fs_dg.ui
	3871768997 31037 /usr/sam/lib/C/fs_disk.h
	688103417 11752 /usr/sam/lib/C/fs_ice.h
	2406195804 13819 /usr/sam/lib/C/fs_ice.ui
	3277551013 19555 /usr/sam/lib/C/fs_lv.h
	1187061537 13803 /usr/sam/lib/C/fs_mfs_sa.ui
	2338370732 59834 /usr/sam/lib/C/fs_op.ui
	2297555110 24160 /usr/sam/lib/C/fs_transformer.ui
	2720804314 28782 /usr/sam/lib/C/fs_vg.h
	1246925005 3069 /usr/sam/lib/C/kc.cat
	451937109 23634 /usr/sam/lib/C/kc.ui
	89417513 43 /usr/sam/lib/C/kc_scr.cat
	3666286658 1567 /usr/sam/lib/C/mo.cat
	1642021861 1633 /usr/sam/lib/C/mo_scr.cat
	4119253312 44047 /usr/sam/lib/C/nia.ui
	2463652803 28028 /usr/sam/lib/C/pd.cat
	3708815051 7907 /usr/sam/lib/C/pd.com.ui
	3391261762 26206 /usr/sam/lib/C/pd_devinfo.tx
	1416322642 21878 /usr/sam/lib/C/pd_dfinfo.tx
	3841483619 2730 /usr/sam/lib/C/pd_scr.cat
	1909608236 4849 /usr/sam/lib/C/pm.cat
	3805168775 330 /usr/sam/lib/C/pm_scr.cat
	563192762 9356 /usr/sam/lib/C/rt.cat
	497663120 25965 /usr/sam/lib/C/sam.lp.cat
	1987878951 1029 /usr/sam/lib/C/sam.ui
	2279674691 4518 /usr/sam/lib/C/sp.cat
	3783602089 7996 /usr/sam/lib/C/tm_ui1.h
	1697429777 14694 /usr/sam/lib/C/ts.cat
	1279984403 35932 /usr/sam/lib/C/ts.ui
	2214875735 57185 /usr/sam/lib/C/ug.cat
	2035454595 76353 /usr/sam/lib/C/ug.ui
	741771814 102326 /usr/sam/lib/C/ug.ut.ui
	3215728388 396 /usr/sam/lib/C/ug_scr.cat
	4254060570 135168 /usr/sam/lib/br/br.sl
	1604514609 8758 /usr/sam/lib/br/br.tm
	657558811 12008 /usr/sam/lib/cluster/cl.tm
	1664579683 1232 /usr/sam/lib/diskless_def
	1255951562 25996 /usr/sam/lib/dps/com_tasks.tcl
	689055489 32768 /usr/sam/lib/dps/dps.sl
	3378238809 17218 /usr/sam/lib/dps/dps.tm
	4051149920 7275 /usr/sam/lib/dps/interface.tcl
	1286180400 4437 /usr/sam/lib/dps/lookup_mgr.tcl
	3219756062 48711 /usr/sam/lib/dps/messages.tcl
	1076902926 47070 /usr/sam/lib/dps/pp_tasks.tcl
	3029666765 15848 /usr/sam/lib/dps/screen.tcl
	4119843818 2374 /usr/sam/lib/dps/servers.tcl
	1324981947 37448 /usr/sam/lib/dps/svr_tasks.tcl
	3565403542 30424 /usr/sam/lib/dps/tclIndex
	759160855 2041 /usr/sam/lib/dps/ts_modify.tcl
	290536338 10130 /usr/sam/lib/dps/ts_utils.tcl
	2249162869 16622 /usr/sam/lib/dps/util.tcl
	984829596 151552 /usr/sam/lib/fal/fal.sl
	593220561 18542 /usr/sam/lib/fal/fal.tm
	1039361201 20501 /usr/sam/lib/fs/fs.da
	638257067 802816 /usr/sam/lib/fs/fs.sl
	2499986751 202030 /usr/sam/lib/fs/fs.tm
	1928833087 425984 /usr/sam/lib/fs/fs_com.sl
	3807723194 13254 /usr/sam/lib/kc/drivers.tx
	3405475839 7128 /usr/sam/lib/kc/kc.da
	2563943818 73728 /usr/sam/lib/kc/kc.sl
	2106188809 36511 /usr/sam/lib/kc/kc.tm
	2078066939 126976 /usr/sam/lib/kc/kc_com.sl
	892873973 12459 /usr/sam/lib/kc/params.tx
	2030198594 1431 /usr/sam/lib/kc/subsys.tx
	1405076082 1499 /usr/sam/lib/kc/tuned/etw.tun
	1029628114 2687 /usr/sam/lib/kc/tuned/oltp_cli.tun
	550518192 2691 /usr/sam/lib/kc/tuned/oltp_sa.tun
	2832660966 2688 /usr/sam/lib/kc/tuned/oltp_ser.tun
	797547237 1535 /usr/sam/lib/kc/tuned/otw.tun
	3432066404 53248 /usr/sam/lib/libdb.sl
	3513446225 24576 /usr/sam/lib/libdm.sl
	3001183730 20480 /usr/sam/lib/libdmtask.sl
	109775064 69632 /usr/sam/lib/librx.sl
	3333818843 286720 /usr/sam/lib/libsam.sl
	752743766 159744 /usr/sam/lib/lp/lp.sl
	860204757 79401 /usr/sam/lib/lp/lp.tm
	1986612204 2994 /usr/sam/lib/mo/mo.da
	3732381390 40960 /usr/sam/lib/mo/mo.sl
	1585363032 6020 /usr/sam/lib/mo/mo.tm
	3734221987 3956 /usr/sam/lib/mo/sched.models
	2618049786 86016 /usr/sam/lib/nnc/boot.sl
	3026953405 22276 /usr/sam/lib/nnc/nnc.da
	3613441881 716800 /usr/sam/lib/nnc/nnc.sl
	2589064462 290644 /usr/sam/lib/nnc/nnc.tm
	3145583612 12288 /usr/sam/lib/nnc/nnc_da_com.sl
	4110203133 4325 /usr/sam/lib/pd/pd.da
	4111822981 81920 /usr/sam/lib/pd/pd.sl
	3306210198 27212 /usr/sam/lib/pd/pd.tm
	1336165544 139264 /usr/sam/lib/pd/pd_comlib.sl
	2447652353 1825 /usr/sam/lib/pd/tape_densities
	3774898343 17042 /usr/sam/lib/pm/pm.tm
	1900856199 28672 /usr/sam/lib/ra/ra.sl
	1430938881 9840 /usr/sam/lib/ra/ra.tm
	3775631308 21578 /usr/sam/lib/rt/rt.tm
	1310638285 24576 /usr/sam/lib/sp/sp.sl
	2710275266 1217 /usr/sam/lib/tm/tm.da
	670377839 15756 /usr/sam/lib/tm/tm.tm
	3847660040 81920 /usr/sam/lib/tm/tm_comlib.sl
	4197025736 131072 /usr/sam/lib/ts/ts.sl
	2387663875 60904 /usr/sam/lib/ts/ts.tm
	1294922382 479232 /usr/sam/lib/ug/ug.sl
	1670934736 145035 /usr/sam/lib/ug/ug.tm
	3821054603 81920 /usr/sam/lib/ug/ug_comlib.sl
	4153784398 6998 /usr/sbin/sam
	2871932670 660 /usr/sam/help/C/FSactions.DisksOptArrays.hv
	1562564889 38 /usr/sam/help/C/FSactions.DisksOptArrays.hvk
	3287407596 2251 /usr/sam/help/C/
		FSactions.DisksOptArrays00.ht
	4111653539 657 /usr/sam/help/C/FStd.AddOptimuHotSpareDisk.hv
	1562564889 38 /usr/sam/help/C/FStd.AddOptimuHotSpareDisk.hvk
	2966783855 2835 /usr/sam/help/C/
		FStd.AddOptimuHotSpareDisk00.ht
	64884601 1073 /usr/sam/help/C/FStd.AllDisksStatus.hv
	1562564889 38 /usr/sam/help/C/FStd.AllDisksStatus.hvk
	1297252133 5067 /usr/sam/help/C/FStd.AllDisksStatus00.ht
	2434386901 652 /usr/sam/help/C/FStd.AnnotateDevice.hv
	1562564889 38 /usr/sam/help/C/FStd.AnnotateDevice.hvk
	2855301152 1681 /usr/sam/help/C/FStd.AnnotateDevice00.ht
	909072596 1326 /usr/sam/help/C/FStd.ArrayEnclosureStatus.hv
	1562564889 38 /usr/sam/help/C/FStd.ArrayEnclosureStatus.hvk
	7677824 4450 /usr/sam/help/C/FStd.ArrayEnclosureStatus00.ht
	1476453828 1801 /usr/sam/help/C/FStd.BindOptimusLUN.hv
	1562564889 38 /usr/sam/help/C/FStd.BindOptimusLUN.hvk
	716534638 10160 /usr/sam/help/C/FStd.BindOptimusLUN00.ht
	4227090398 1065 /usr/sam/help/C/
		FStd.ConfiguredOptimusLUNs.hv
	1562564889 38 /usr/sam/help/C/FStd.ConfiguredOptimusLUNs.hvk
	1739019199 2723 /usr/sam/help/C/
		FStd.ConfiguredOptimusLUNs00.ht
	1823603810 1155 /usr/sam/help/C/FStd.DiskEnclosureStatus.hv
	1562564889 38 /usr/sam/help/C/FStd.DiskEnclosureStatus.hvk
	551906863 3663 /usr/sam/help/C/FStd.DiskEnclosureStatus00.ht
	3693025966 640 /usr/sam/help/C/FStd.IdentifyDrives.hv
	1562564889 38 /usr/sam/help/C/FStd.IdentifyDrives.hvk
	3777051854 2045 /usr/sam/help/C/FStd.IdentifyDrives00.ht
	2711858947 637 /usr/sam/help/C/FStd.ModifyArrayAlias.hv
	1562564889 38 /usr/sam/help/C/FStd.ModifyArrayAlias.hvk
	1956775087 1209 /usr/sam/help/C/FStd.ModifyArrayAlias00.ht
	4283983398 673 /usr/sam/help/C/FStd.RemOptimuHotSpareDisk.hv
	1562564889 38 /usr/sam/help/C/FStd.RemOptimuHotSpareDisk.hvk
	2698659970 2468 /usr/sam/help/C/
		FStd.RemOptimuHotSpareDisk00.ht
	4239030377 1447 /usr/sam/help/C/FStd.ReplaceLUN.hv
	1562564889 38 /usr/sam/help/C/FStd.ReplaceLUN.hvk
	2895368575 9471 /usr/sam/help/C/FStd.ReplaceLUN00.ht
	2561279811 1111 /usr/sam/help/C/FStd.ViewEnclosureStatus.hv
	1562564889 38 /usr/sam/help/C/FStd.ViewEnclosureStatus.hvk
	2292026789 3253 /usr/sam/help/C/
		FStd.ViewEnclosureStatus00.ht
	2602491872 1412 /usr/sam/help/C/
		FStd.ViewOptimusArrayStatus.hv
	1562564889 38 /usr/sam/help/C/
		FStd.ViewOptimusArrayStatus.hvk
	3247638131 3240 /usr/sam/help/C/
		FStd.ViewOptimusArrayStatus00.ht
	1338098886 63103 /usr/sam/help/C/fs/fs.hv
	1562564889 38 /usr/sam/help/C/fs/fs.hvk
	1604460282 298257 /usr/sam/help/C/fs/fs00.ht
	1466572261 5584 /usr/sam/help/C/fs/fs01.ht
	1070842562 259 /usr/sam/help/C/graphics/bluecheck.pm.Z
	2298566187 224 /usr/sam/help/C/graphics/bluelite.pm.Z
	2698172053 254 /usr/sam/help/C/graphics/checklite.pm.Z
	3848542690 237 /usr/sam/help/C/graphics/greencheck.pm.Z
	1852647042 227 /usr/sam/help/C/graphics/greenlite.pm.Z
	2261436312 260 /usr/sam/help/C/graphics/redcheck.pm.Z
	923041055 223 /usr/sam/help/C/graphics/redlite.pm.Z
	1294826390 197 /usr/sam/help/C/graphics/transparent.pm.Z
	1690726857 225 /usr/sam/help/C/graphics/whitelite.pm.Z
	783095878 225 /usr/sam/help/C/graphics/yellowlite.pm.Z
	972836522 24332 /usr/sam/help/C/lp/lp.hv
	1562564889 38 /usr/sam/help/C/lp/lp.hvk
	514285952 112442 /usr/sam/help/C/lp/lp00.ht
	1768625723 4331 /usr/sam/help/C/lp/lp01.ht
	3176683516 90301 /usr/sam/help/C/nnc/nnc.hv
	1562564889 38 /usr/sam/help/C/nnc/nnc.hvk
	1264173047 449616 /usr/sam/help/C/nnc/nnc00.ht

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	Since this is a SAM patch, filesets SystemAdmin.SAM and
	SystemAdmin.SAM-HELP should already exist on the system.
	('swlist -l fileset SystemAdmin' will tell you this.)

Supersedes:
	PHCO_7672 PHCO_7814 PHCO_8133 PHCO_9895 PHCO_9993 PHCO_10753
	PHCO_11361 PHCO_11490 PHCO_11740 PHCO_11824 PHCO_11982 PHCO_12833
	PHCO_13251 PHCO_14639 PHCO_14888 PHCO_15783 PHCO_15785 PHCO_16344
	PHCO_16577 PHCO_17528 PHCO_17871 PHCO_18217 PHCO_19046 PHCO_19990
	PHCO_21186 PHCO_21844

Equivalent Patches: None

Patch Package Size: 11950 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHCO_22268

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHCO_22268.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHCO_22268.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHCO_22268.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHCO_22268.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	Make sure SAM is not running before installing this patch.