Patch Name: PHCO_19783 Patch Description: s700_800 10.20 mksf/insf(1M) cumulative patch (ACE 199912) Creation Date: 99/09/17 Post Date: 99/12/07 Hardware Platforms - OS Releases: s700: 10.20 s800: 10.20 Products: N/A Filesets: OS-Core.UX-CORE OS-Core.CORE-ENG-A-MAN Automatic Reboot?: No Status: General Release Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHCO_19783 Symptoms: PHCO_19783: This patch allows valid /dev/crt files to remain unchanged when device files are created for the framebuf pseudo driver. Existing configuration files which contain references to /dev/crt device files are less likely to have to change when a graphics card is added or moved. The (ACE 199912) release supports HP VISUALIZE-fxe graphics. PHCO_17633: This patch enables new functionality that is part of the 10.20 ACE (Additional Core Enhancements) Workstation bundle, which adds new I/O drivers to support the B1000, C3000, and J5000 systems. PHCO_15872: lssf does not know how to handle fcp/fcT1_cntl drivers. PHCO_13859: mksf(1M) does not support DLT4000 tape devices PHCO_13699: The pci_mux0 driver enhancement information is missing from the mksf(1M) man page. PHCO_13336: Support for pci_mux0 driver. PHCO_10788: Add ATM drivers "atmnio", "atmgsc", and "atm2gsc" PHCO_8746: s700_800 10.20 insf, mksf, lssf, and rmsf patch. Defect Description: PHCO_19783: If a graphics device is added or moved in a system, the relationship between /dev/crt special files and graphics devices is not preserved for those devices which are not changed. This applies to systems which have more than one graphics device. Resolution: Enhancement. PHCO_17633: New functionality to support the B1000, C3000, and J5000 systems on HP-UX 10.20 Resolution: Enhancement. PHCO_15872: The fcp and fcT1_cntl drivers did not have entries in look up table. So noop entries were created for these two drivers. PHCO_13859: DLT4000 tape device was not supported for stape driver in 10.20. Nor was tape1 and tape2 driver as the manpage for mksf(1M) specified. lssf(1M) will always output "unknown density" when the special file is installed or created by insf(1M) or mksf(1m). mksf(1m) must also be updated for stape to include the DLT4000 densities. PHCO_13699: The mksf(1M) man page was not updated to include information on the enhancement support for the the pci_mux0 driver. This information has now been added to the man page. PHCO_13336: Support for pci_mux0 driver. PHCO_10788: Add ATM drivers "atmnio", "atmgsc" and "atm2gsc" to insf(1M) PHCO_8746: the insf(1m), mksf(1m), lssf(1m), and rmsf(1m) commands do not have vglan0 in their recognized list of lan drivers. SR: 4701398263 8606104808 Patch Files: /sbin/insf /sbin/lssf /sbin/mksf /sbin/rmsf /usr/sbin/insf /usr/sbin/lssf /usr/sbin/mksf /usr/sbin/rmsf /usr/share/man/man1m.Z/mksf.1m what(1) Output: /sbin/insf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /sbin/lssf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /sbin/mksf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /sbin/rmsf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /usr/sbin/insf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /usr/sbin/lssf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /usr/sbin/mksf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /usr/sbin/rmsf: $Revision: 78.2.1.23 $ PATCH-PHCO_18644 for 10.20; for 10.30, 11.x compatib ility libc.a_ID@@/main/r10dav/libc_dav/libc_ dav_cpe/9 /ux/core/libs/libc/archive_pa1/libc.a_ID Jul 8 1999 15:44:31 PATCH_10_20: main.o audio.o autoch.o cent.o diaghpib 1.o disk.o hid.o hil.o hub.o instr0.o lan.o lantty.o lpr.o mux.o ps2.o pseudo.o tape.o h pux_rel.o 99/09/17 /usr/share/man/man1m.Z/mksf.1m: None cksum(1) Output: 1151158415 299008 /sbin/insf 1151158415 299008 /sbin/lssf 1151158415 299008 /sbin/mksf 1151158415 299008 /sbin/rmsf 1151158415 299008 /usr/sbin/insf 1151158415 299008 /usr/sbin/lssf 1151158415 299008 /usr/sbin/mksf 1151158415 299008 /usr/sbin/rmsf 2025326386 12056 /usr/share/man/man1m.Z/mksf.1m Patch Conflicts: None Patch Dependencies: s700: 10.20: PHCO_19784 Hardware Dependencies: None Other Dependencies: None Supersedes: PHCO_8746 PHCO_10788 PHCO_13336 PHCO_13699 PHCO_13859 PHCO_15872 PHCO_17633 Equivalent Patches: PHCO_19829: s700: 11.00 s800: 11.00 Patch Package Size: 360 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHCO_19783 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHCO_19783.depot By default swinstall will archive the original software in /var/adm/sw/patch/PHCO_19783. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. WARNING: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHCO_19783.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHCO_19783.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: None