Patch Name: PHCO_19485

Patch Description: s700_800 10.20 HP Array Manager/60 installation patch

Creation Date: 99/09/22

Post Date:  99/09/24

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products: N/A

Filesets:
	OS-Core.ADMN-ENG-A-MAN OS-Core.C2400-UTIL

Automatic Reboot?: No

Status: General Superseded

Critical:
	Yes
	PHCO_19485: OTHER
		Patch provides critical functionality for use of
		HP Fibre Array/60 devices.

Path Name: /hp-ux_patches/s700_800/10.X/PHCO_19485

Symptoms:
	PHCO_19485:

	1.  JAGab20973 - Incorrect diagnostic message when
	    specifying alias longer than 16 characters.

	2.  JAGab24502 - Unclear diagnostic message when
	    binding a LUN on a passive controller.

	3.  JAGab25356 - Ambiguous cache battery age shown in
	    controller display.

	4.  JAGab14439 - Rounding problem when setting and
	    displaying cache flush options.

	5.  JAGab18057 - Need to add interpretation of FRU code and
	    qualifier for amlog.

	6.  JAGab57569 - SCSI channel, SCSI ID, enclosure ID and
	    slot ID are ambiguous in disk display.

	7.  JAGab21223 - amdsp fails with core file during
	    LUN display when all original drives are spared.

	8.  JAGab39222 - Need improved handling of commands which
	    require controller synchronization (reset battery age,
	    set time, set alias), when one controller is missing
	    or failed.

	9.  JAGab67460 - Need capability to mark disks operational
	    from any failed state.

	10.  JAGab68932 - Need an option for amdload to allow
	     BCC firmware download regardless of disk states.

	11.  JAGab43951 - Need to show NVSRAM version in controller
	     display.

	12.  JAGab43865 - Need capability to reset LUN cache
	     parameters to default values, and show a cache state
	     table in the LUN display.

	13.  JAGab17231 - Command line extended help and usage
	     messages need to be more consistent with man pages.

	14.  JAGab65570 - amdload man page must describe requirement
	     to download bootware, firmware, NVSRAM file in proper
	     sequence.

	15.  JAGab70912 - Need capability to flash LEDs for a drive
	     list.

	16.  Need SIC HWPath call to allow EMS client to
	     report array hardware path.

	17.  JAGab72268 - Need capability to download firmware to
	     IBM disks.

	18.  Client/server interface (SIC) needs forward and
	     backward compatibility to support EMS monitor.

	19.  JAGab31757 - amdsp may fail with core file,
	     Segmentation violation.

	PHCO_18684:
	Initial Release Install Patch.

Defect Description:
	PHCO_19485:
	1.  Description: JAGab20973 -
			 Incorrect diagnostic message when
	    		 specifying alias longer than 16 characters.

	2.  Description: JAGab24502 -
			 Unclear diagnostic message when binding a
			 LUN on a passive controller.

	3.  Description: JAGab25356 -
			 Ambiguous cache battery age shown in
			 controller display.

	4.  Description: JAGab14439 -
			 Rounding problem when setting and
			 displaying cache flush options.

	5.  Description: JAGab18057 -
			 Need to add interpretation of FRU code and
	    		 qualifier for amlog.

	6.  Description: JAGab57569 -
			 SCSI channel, SCSI ID, enclosure ID and
			 slot ID are ambiguous in disk display.

	7.  Description: JAGab21223 -
			 amdsp fails with core file during LUN
			 display when all original drives are
			 spared.

	8.  Description: JAGab39222 -
			 Need improved handling of commands which
	    		 require controller synchronization (reset
	    		 battery age, set time, set alias), when one
	    		 controller is missing or failed.

	9.  Description: JAGab67460 -
			 Need capability to mark disks operational
	    		 from any failed state.

	10.  Description: JAGab68932 -
			  Need an option for amdload to allow BCC
			  firmware download regardless of disk
			  states.

	11.  Description: JAGab43951 -
			  Need to show NVSRAM version in controller
	     		  display.

	12.  Description: JAGab43865 -
			  Need capability to reset LUN cache
	     		  parameters to default values, and show a
	     		  cache state table in the LUN display.

	13.  Description: JAGab17231 -
			  Command line extended help and usage
	     		  messages need to be more consistent with
	     		  man pages.

	14.  Description: JAGab65570 -
			  amdload man page must describe requirement
	     		  to download bootware, firmware, NVSRAM
	     		  file in proper sequence.

	15.  Description: JAGab70912 -
			  Need capability to flash LEDs for a drive
	     		  list.

	16.  Description:
			  Need SIC HWPath call to allow EMS client
			  to report array hardware path.

	17.  Description: JAGab72268 -
			  Need capability to download firmware to
	     		  IBM disks.

	18.  Description:
			  Client/server interface (SIC) needs
			  forward and backward compatibility to
			  support EMS monitor.

	19.  Description: JAGab31757 -
			  amdsp may fail with core file,
			  Segmentation violation.

	PHCO_18684:
	1.  Description: Initial Release Install Patch.

SR:
	4700000000

Patch Files:
	/opt/hparray/bin/AM60Srvr
	/opt/hparray/bin/amcfg
	/opt/hparray/bin/amdsp
	/opt/hparray/bin/amfmt
	/opt/hparray/bin/amutil
	/opt/hparray/bin/ammgr
	/opt/hparray/bin/amlog
	/opt/hparray/bin/amdload
	/opt/hparray/lib/nls/msg/C/AM60Srvr.cat
	/opt/hparray/lib/nls/msg/C/am60cl.cat
	/opt/hparray/lib/nls/msg/C/am60oemmsg01.cat
	/opt/hparray/lib/nls/msg/C/am60fwerrcod.cat
	/usr/lbin/hparray/hparamail
	/usr/lbin/hparray/hparamgr.hdr
	/usr/lbin/hparray/hparamgrd
	/usr/lbin/hparray/hparamgrrc
	/sbin/init.d/hparamgr
	/usr/newconfig/etc/rc.config.d/hparamgr
	/opt/hparray/share/man/man1m/AM60Srvr.1m
	/opt/hparray/share/man/man1m/amcfg.1m
	/opt/hparray/share/man/man1m/amdsp.1m
	/opt/hparray/share/man/man1m/amfmt.1m
	/opt/hparray/share/man/man1m/amlog.1m
	/opt/hparray/share/man/man1m/ammgr.1m
	/opt/hparray/share/man/man1m/amutil.1m
	/opt/hparray/share/man/man1m/amdload.1m

what(1) Output:
	/opt/hparray/bin/AM60Srvr:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Server
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - HP Shim
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		sascsidev_init.c, $Revision: 1.1 $
		sascsidev_init_lun.c, $Revision: 1.1 $
		sascsidev_init_dev_file.c, $Revision: 1.1 $
		sascsidev_lock.c, $Revision: 1.1 $
		sascsidev_io.c, $Revision: 1.1 $
		sascsidev_unlock.c, $Revision: 1.1 $
		sascsidev_end.c, $Revision: 1.3 $
		sascsidev_io_diag0.c, $Revision: 1.1 $
		sascsidev_io_sctl.c, $Revision: 1.1 $
		sascsidev_gen.c, $Revision: 1.1 $
		tl_io_init.c, $Revision: 1.1 $
		tl_path_to_token.c, $Revision: 1.1 $
		tl_get_driver_name.c, $Revision: 1.1 $
		tl_io_end.c, $Revision: 1.1 $
		tl_get_minor_number.c, $Revision: 1.1 $
		tl_get_c_major.c, $Revision: 1.1 $
		tl_diag0_init.c, $Revision: 1.1 $
		tl_diag0_lock.c, $Revision: 1.1 $
		tl_diag0_unlock.c, $Revision: 1.1 $
		tl_diag0_end.c, $Revision: 1.1 $
		pl_init_st_log_global.c, $Revision: 1.1 $
		sys_test.c, $Revision: 1.1 $
		tl_get_ioerrno_parm.c, $Revision: 1.1 $
		tl_diag0_acc_errno.c, $Revision: 1.1 $
		tl_diag0_send_buff.c, $Revision: 1.1 $
		tl_diag0_return_buff.c, $Revision: 1.1 $
		tl_diag0_get_buff.c, $Revision: 1.1 $
		tl_diag0_scsi_io_setup.c, $Revision: 1.1 $
		tl_diag0_log_rel.c, $Revision: 1.1 $
		add_lit_parm.c, $Revision: 1.1 $
		add_msg_parm.c, $Revision: 1.1 $
		build_ll_msg.c, $Revision: 1.1 $
		log_ll_msg.c, $Revision: 1.1 $
		release_ll_msg.c, $Revision: 1.1 $
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/amcfg:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Client
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/amdsp:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Client
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/amfmt:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Client
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/amutil:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Client
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/ammgr:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Client
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/amlog:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Standalone Utility
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/bin/amdload:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.03 $
		+-HP Array Manager/60
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-HP Array Manager/60 - Client
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
		+-HP Array Manager/60 - Server Interface Component
		| Version: B.10.20.07
		| (built for: HP-UX on B.10.20 1999/09/22 08:54:49)
		+-Copyright (c) 1995 Hewlett-Packard Company
	/opt/hparray/lib/nls/msg/C/AM60Srvr.cat:
		HP AutoRAID [B.10.20.07] AM60Srvr.cat $Revision: 1.1
			6 $
		Built for HP-UX B.10.20 on 1999/09/22 08:54:49 PM
			MDT
		(c) Copyright 1995 Hewlett-Packard Company
	/opt/hparray/lib/nls/msg/C/am60fwerrcod.cat:
		HP AutoRAID [B.10.20.07] fwerrcod.cat $Revision: 1.9
			 $
		Built for HP-UX B.10.20 on 1999/09/22 08:54:49 PM
			MDT
		(c) Copyright 1995 Hewlett-Packard Company
	/opt/hparray/lib/nls/msg/C/am60cl.cat:
		HP AutoRAID [B.10.20.07] am60cl.cat $Revision: 1.60
			$
		Built for HP-UX B.10.20 on 1999/09/22 08:54:49 PM
			MDT
		(c) Copyright 1995 Hewlett-Packard Company
	/opt/hparray/lib/nls/msg/C/am60oemmsg01.cat:
		HP AutoRAID [B.10.20.07] oemmsg01.cat $Revision: 1.6
			 $
		Built for HP-UX B.10.20 on 1999/09/22 08:54:49 PM
			MDT
		(c) Copyright 1995 Hewlett-Packard Company
	/usr/lbin/hparray/hparamail:
		+-HP Array Manager - Mail Script
		| Version: B.11.00.00
		+-Copyright (c) 1999 Hewlett-Packard Company
	/usr/lbin/hparray/hparamgr.hdr:
		+-HP Array Manager - Script Header
		| Version: B.11.00.00
		+-Copyright (c) 1999 Hewlett-Packard Company
	/usr/lbin/hparray/hparamgrd:
		+-HP Array Manager - Monitor Daemon
		| Version: B.11.00.00
		+-Copyright (c) 1999 Hewlett-Packard Company
	/usr/lbin/hparray/hparamgrrc:
		+-HP Array Manager - Startup Script
		| Version: B.11.00.00
		+-Copyright (c) 1999 Hewlett-Packard Company
	/sbin/init.d/hparamgr:
		+-HP Array Manager - Startup/Shutdown Script
		| Version: B.11.00.00
		+-Copyright (c) 1999 Hewlett-Packard Company
	/usr/newconfig/etc/rc.config.d/hparamgr:
		None
	/opt/hparray/share/man/man1m/AM60Srvr.1m:
		None
	/opt/hparray/share/man/man1m/amcfg.1m:
		None
	/opt/hparray/share/man/man1m/amdsp.1m:
		None
	/opt/hparray/share/man/man1m/amfmt.1m:
		None
	/opt/hparray/share/man/man1m/amutil.1m:
		None
	/opt/hparray/share/man/man1m/ammgr.1m:
		None
	/opt/hparray/share/man/man1m/amlog.1m:
		None
	/opt/hparray/share/man/man1m/amdload.1m:
		None

cksum(1) Output:
	716082043 2790904 /opt/hparray/bin/AM60Srvr
	1098472235 1122760 /opt/hparray/bin/amcfg
	1815669468 1265384 /opt/hparray/bin/amdsp
	3008201135 1097896 /opt/hparray/bin/amfmt
	1453525763 1124880 /opt/hparray/bin/amutil
	617192289 1129240 /opt/hparray/bin/ammgr
	4253976929 976336 /opt/hparray/bin/amlog
	582742031 1135776 /opt/hparray/bin/amdload
	1581789077 7623 /opt/hparray/lib/nls/msg/C/AM60Srvr.cat
	3635759946 8868 /opt/hparray/lib/nls/msg/C/am60fwerrcod.cat
	4262762884 83418 /opt/hparray/lib/nls/msg/C/am60cl.cat
	3434785714 1383 /opt/hparray/lib/nls/msg/C/am60oemmsg01.cat
	212830779 4931 /usr/lbin/hparray/hparamail
	1655478901 3564 /usr/lbin/hparray/hparamgr.hdr
	830060169 5893 /usr/lbin/hparray/hparamgrd
	4267444545 2873 /usr/lbin/hparray/hparamgrrc
	2655013622 5821 /sbin/init.d/hparamgr
	999677066 199 /usr/newconfig/etc/rc.config.d/hparamgr
	2772667096 2933 /opt/hparray/share/man/man1m/AM60Srvr.1m
	3989853922 13483 /opt/hparray/share/man/man1m/amcfg.1m
	14502595 15091 /opt/hparray/share/man/man1m/amdsp.1m
	595449514 612 /opt/hparray/share/man/man1m/amfmt.1m
	873402741 7191 /opt/hparray/share/man/man1m/amutil.1m
	2371255458 9946 /opt/hparray/share/man/man1m/ammgr.1m
	428831963 6263 /opt/hparray/share/man/man1m/amlog.1m
	2807812830 8756 /opt/hparray/share/man/man1m/amdload.1m

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies:
	This patch provides the utilities for the HP Fibre
	Array/60. To use the utilities an HP Fibre Array/60
	array must be connected and configured to the system.

Supersedes:
	PHCO_18684

Equivalent Patches:
	PHCO_19571:
	s700: 11.00
	s800: 11.00

Patch Package Size: 10690 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHCO_19485

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHCO_19485.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHCO_19485.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHCO_19485.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHCO_19485.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None