Patch Name: PHCO_15032

Patch Description: s700_800 10.24 (VVOS) Set_parms year 2000 patch

Creation Date: 98/04/28

Post Date:  98/04/30

Hardware Platforms - OS Releases:
	s700: 10.24
	s800: 10.24

Products: N/A

Filesets:
	OS-Core.UX-CORE

Automatic Reboot?: No

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHCO_15032

Symptoms:
	PHCO_15032:
	  Repackaged HP-UX patch PHCO_14039 for VVOS.

	  Note: Although patch PHCO_14039 refers to 10.01, 10.10,
	  and 10.20, this patch is specific to VVOS 10.24.

	  Based on HP-UX patch PHCO_14039:
	  This patch is needed for 10.01, 10.10, and 10.20 to allow
	  set_parms to set dates for year 2000 and above, in both
	  the GUI and TUI.

Defect Description:
	PHCO_15032:
	  Repackaged HP-UX patch PHCO_14039 for VVOS.

	  Note: VVOS 10.24 does not support Ignite-UX.  There
	  is no way to install this patch during a cold install.

	  Based on HP-UX patch PHCO_14039:
	  This patch can be applied to any 700 or 800 series
	  machine.  It will allow future calls to set_parms
	  to set dates for the year 2000 and over.

	  Please Note:

	  * This patch, of course, cannot affect initial cold
	    installs from media unless it is used as part of a
	    patch bundle that is loaded during a cold install
	    (either by Ignite-UX or the older Cold Install system).

SR:
	1653245530

Patch Files:
	/sbin/set_parms.d/12_date_time

what(1) Output:
	/sbin/set_parms.d/12_date_time:
		$Revision: 10.6 $

cksum(1) Output:
	751002552 11217 /sbin/set_parms.d/12_date_time

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHCO_14039:
	s700: 10.01 10.10 10.20
	s800: 10.01 10.10 10.20

Patch Package Size: 70 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHCO_15032

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHCO_15032.depot

	5b. For a homogeneous NFS Diskless cluster run swcluster on the
	    server to install the patch on the server and the clients:

		swcluster -i -b

	    This will invoke swcluster in the interactive mode and
	    force all clients to be shut down.

	    WARNING: All cluster clients must be shut down prior to the
		     patch installation.  Installing the patch while the
		     clients are booted is unsupported and can lead to
		     serious problems.

	    The swcluster command will invoke an swinstall session in which
	    you must specify:

		alternate root path  -  default is /export/shared_root/OS_700
		source depot path    -  /tmp/PHCO_15032.depot

	    To complete the installation, select the patch by choosing
	    "Actions -> Match What Target Has" and then "Actions -> Install"
	    from the Menubar.

	5c. For a heterogeneous NFS Diskless cluster:

		- run swinstall on the server as in step 5a to install
		  the patch on the cluster server.

		- run swcluster on the server as in step 5b to install
		  the patch on the cluster clients.

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHCO_15032.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	Warning: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHCO_15032.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHCO_15032.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None