Patch Name: PHCO_13133

Patch Description: s700_800 10.20 lpspool subsystem cumulative patch

Creation Date: 97/12/04

Post Date:  97/12/15

Hardware Platforms - OS Releases:
	s700: 10.20
	s800: 10.20

Products: N/A

Filesets:
	PrinterMgmt.LP-SPOOL

Automatic Reboot?: No

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700_800/10.X/PHCO_13133

Symptoms:
	PHCO_13133:
	1)incomplete lpstat output when -a/-p option used
	with printer name and class
	2)After PHCO_11462, moving request with lpalt
	leaves data file in req dir

	PHCO_12894:
	1. Jobs submitted to a LP remote printer that points
	to a "disabled" remote HPDPS printer are discarded.
	2. When more than one jobs, whose job sequence numbers
	are the same, are simultaneously submitted from the same
	host to the same remote printer through RFC1179 protocol,
	rlpdaemon(1M) fails to spool the jobs on the remote system
	due to data/control file name collision.
	3. All jobs from any HPDPS printers are spooled under the
	/usr/spool/lp/request/PDRequest by rlpdaemon(1M).  This
	single PDRequest directory increases the chance of file
	name collision due to simultaneous job submission.

	PHCO_11462:
	1. Cancelling a lp job with empty control file
	clears the whole queue.
	2. Printer gets disabled on cancelling a printing
	job.

	PHCO_10891:
	1. "lpstat -i -o<printer-name>" doesn't inhibit the
	reporting of the remote status if a HPDPS printer name
	is specified.  This problem happens only when the HPDPS
	patch, PHCO_10608, is installed on the system.  Because
	of this, CDE print manager doesn't work correctly for
	HPDPS printers.

	PHCO_10749:
	1. LP-spool hang or qstatus corrupt when /var full
	log says:Bogus request
	2. Parent lpsched hangs when lpalt is used to move
	a request.
	3. Model scripts does not handle SIGTERM any more.
	4. lpsched introduced 5 sec delay between prints at
	10.20

	PHCO_8488:
	1. lpsched hangs under FIFO full condition
	2. Printers go idle even when requests are present
	in the queue
	3. Jobs not printed when remote host(IBM) immediately
	snaps connection.
	4. If a BSD system spooler sends a '\001' to rlp(1)
	after the control file has been sent, rlp(1) simply
	ignores the '\001' and removes the entry.
	5. lp, cancel, and lpstat hang when forwarding jobs
	or requests to HPDPS.
	6. Implicit requirement that a rlpdeamon client's
	remote printer name must be the same as its
	local pseudo name.

Defect Description:
	PHCO_13133:
	1) lpstat was not giving the correct output for
	certain sequences of printer/class lists due to
	incorrect referencing of both pstatus and qstatus
	files.
	2) lpsched was not clearing the data files present
	in the spooler directory due to descripencies in
	the names of these files, caused by the lpalt.

	PHCO_12894:
	1.  Jobs submitted to a LP remote printer that points to
	a "disabled" remote HPDPS printer are discarded.
	2.  When more than one jobs, whose job sequence numbers are
	the same, are simultaneously submitted from the same
	host to the same remote printer through RFC1179
	protocol, rlpdaemon(1M) fails to spool the jobs on the
	remote system due to data/control file name collision.
	3.  All jobs from any HPDPS printers are spooled under the
	/usr/spool/lp/request/PDRequest by rlpdaemon(1M).  This
	single PDRequest directory increases the chance of file
	name collision due to simultaneous job submission.

	PHCO_11462:
	1.Cancelling a lp job with empty control file
	clears the whole queue.
	2.Printer gets disabled on cancelling a printing
	job.

	PHCO_10891:
	1. "lpstat -i -o<printer-name>" doesn't inhibit the
	reporting of the remote status if a HPDPS printer name
	is specified.  This problem happens only when the HPDPS
	patch, PHCO_10608, is installed on the system.  Because
	of this, CDE print manager doesn't work correctly for
	HPDPS printers.

	PHCO_10749:
	1. LP-spool hang or qstatus corrupt when /var full
	log says:Bogus request
	2. Parent lpsched hangs when lpalt is used to move
	a request.
	3. Model scripts does not handle SIGTERM any more.
	4. lpsched introduced 5 sec delay between prints at
	10.20

	PHCO_8488:
	1. lpsched hangs under FIFO full condition
	2. Printers go idle even when requests are present
	in the queue
	3. Jobs not printed when remote host(IBM) immediately
	snaps connection.
	4. If a BSD system spooler sends a '\001' to rlp(1)
	after the control file has been sent, rlp(1) simply
	ignores the '\001' and removes the entry.
	5. lp, cancel, and lpstat hang when forwarding jobs
	or requests to HPDPS.
	6. Implicit requirement that a rlpdeamon client's
	remote printer name must be the same as its
	local pseudo name.

SR:
	1653235002 1653232694 1653233296 5003347351 4701356097
	4701350769 5003359760 1653198119 1653203109 1653208504
	5003330688 1653172023 4701323964 5003318188 4701334128

Patch Files:
	/usr/lib/lp/model/rmodel
	/usr/lib/lp/model/PCL5
	/usr/lib/lp/model/colorlaserjet
	/usr/lib/lp/model/deskjet1600CM
	/usr/lib/lp/model/hp5000c30
	/usr/lib/lp/model/laserjet
	/usr/lib/lp/model/laserjet4
	/usr/lib/lp/model/laserjet4Si
	/usr/lib/lp/model/laserjet4v
	/usr/lib/lp/model/laserjet5Si
	/usr/lib/lp/model/laserjetIIISi
	/usr/bin/cancel
	/usr/bin/disable
	/usr/bin/enable
	/usr/bin/lpstat
	/usr/bin/lp
	/usr/bin/lpalt
	/usr/sbin/lpadmin
	/usr/sbin/lpsched
	/usr/sbin/rlpdaemon
	/usr/sbin/rlp

what(1) Output:
	/usr/lib/lp/model/rmodel:
		/usr/lib/lp/model/rmodel:
		$Header: rmodel,v 72.3.1.2 97/04/28 19:49:14 ssa Exp
			 $:
	/usr/lib/lp/model/PCL5:
		/usr/lib/lp/model/PCL5:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/colorlaserjet:
		/usr/lib/lp/model/colorlaserjet:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/deskjet1600CM:
		/usr/lib/lp/model/deskjet1600CM:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/hp5000c30:
		/usr/lib/lp/model/hp5000c30:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/laserjet:
		None
	/usr/lib/lp/model/laserjet4:
		/usr/lib/lp/model/laserjet4:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/laserjet4Si:
		/usr/lib/lp/model/laserjet4Si:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/laserjet4v:
		/usr/lib/lp/model/laserjet4v:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/laserjet5Si:
		/usr/lib/lp/model/laserjet5Si:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/lib/lp/model/laserjetIIISi:
		/usr/lib/lp/model/laserjetIIISi:
		$Header: PCL5,v 76.2.1.3 97/11/13 15:28:43 ssa Exp $
			:
	/usr/bin/cancel:
		/usr/bin/cancel:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o cancel.o 97/12/04:
	/usr/bin/disable:
		/usr/bin/disable:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o disable.o 97/12/04:
	/usr/bin/enable:
		/usr/bin/enable:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o enable.o 97/12/04:
	/usr/bin/lpstat:
		/usr/bin/lpstat:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o lpstat.o 97/12/04:
	/usr/bin/lp:
		/usr/bin/lp:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o lp.o 97/12/04:
	/usr/bin/lpalt:
		/usr/bin/lpalt:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o lpalt.o 97/12/04:
	/usr/sbin/lpadmin:
		/usr/sbin/lpadmin:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o lpadmin.o 97/12/04:
	/usr/sbin/lpsched:
		/usr/sbin/lpsched:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o lpsched.o 97/12/04:
	/usr/sbin/rlpdaemon:
		/usr/sbin/rlpdaemon:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o rlpdaemon.o 97/12/04:
	/usr/sbin/rlp:
		/usr/sbin/rlp:
		$Revision: 78.29.1.25 $
		PATCH_10_20: hpux_rel.o rlp.o 97/12/04:

cksum(1) Output:
	332041795 5287 /usr/lib/lp/model/rmodel
	840611417 45746 /usr/lib/lp/model/PCL5
	840611417 45746 /usr/lib/lp/model/colorlaserjet
	840611417 45746 /usr/lib/lp/model/deskjet1600CM
	840611417 45746 /usr/lib/lp/model/hp5000c30
	3915210007 19570 /usr/lib/lp/model/laserjet
	840611417 45746 /usr/lib/lp/model/laserjet4
	840611417 45746 /usr/lib/lp/model/laserjet4Si
	840611417 45746 /usr/lib/lp/model/laserjet4v
	840611417 45746 /usr/lib/lp/model/laserjet5Si
	840611417 45746 /usr/lib/lp/model/laserjetIIISi
	3392288090 40960 /usr/bin/cancel
	2756977381 24576 /usr/bin/disable
	3037812829 16384 /usr/bin/enable
	1893660904 49152 /usr/bin/lpstat
	3503570744 45056 /usr/bin/lp
	2779210665 36864 /usr/bin/lpalt
	208081016 45056 /usr/sbin/lpadmin
	3772261392 49152 /usr/sbin/lpsched
	3699803582 69632 /usr/sbin/rlpdaemon
	1955186808 24576 /usr/sbin/rlp

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
	PHCO_8488 PHCO_10749 PHCO_10891 PHCO_11462 PHCO_12894

Equivalent Patches: None

Patch Package Size: 530 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHCO_13133

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHCO_13133.depot

	5b. For a homogeneous NFS Diskless cluster run swcluster on the
	    server to install the patch on the server and the clients:

		swcluster -i -b

	    This will invoke swcluster in the interactive mode and
	    force all clients to be shut down.

	    WARNING: All cluster clients must be shut down prior to the
		     patch installation.  Installing the patch while the
		     clients are booted is unsupported and can lead to
		     serious problems.

	    The swcluster command will invoke an swinstall session in which
	    you must specify:

		alternate root path  -  default is /export/shared_root/OS_700
		source depot path    -  /tmp/PHCO_13133.depot

	    To complete the installation, select the patch by choosing
	    "Actions -> Match What Target Has" and then "Actions -> Install"
	    from the Menubar.

	5c. For a heterogeneous NFS Diskless cluster:

		- run swinstall on the server as in step 5a to install
		  the patch on the cluster server.

		- run swcluster on the server as in step 5b to install
		  the patch on the cluster clients.

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHCO_13133.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	Warning: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHCO_13133.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHCO_13133.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None