Patch Name: PHSS_25981 Patch Description: s700 10.20 B1000/B2000/C3X00/J5X00/J6000/J7000 5.0 FW Creation Date: 01/12/19 Post Date: 02/01/11 Hardware Platforms - OS Releases: s700: 10.20 Products: N/A Filesets: OS-Core.KERN-RUN Automatic Reboot?: Yes Status: General Release Critical: No (superseded patches were critical) PHSS_24104: OTHER This patch fixes the J6000 external SCSI port definition and makes some changes to I/O addressing. PHSS_23184: OTHER This patch is critical for J6000,J5600,J5000, and J7000 systems. It sets the 1GB DIMM refresh rate to 7.5us to avoid mismatched pairs that can lead to missing memory pairs PHSS_22900: CORRUPTION This patch is critical for J6000 systems. It corrects a potential data corruption problem transferring data between the I/O Memory controller ASIC and the PCI slots. PHSS_22573: HANG This patch is critical for B1000,C3000,C3600, J5000,J5600,J6000, and J7000 systems. It improves system dumps and prevents hangs. It allows the dumps to capture more failure data. PHSS_22474: OTHER This patch is critical for B1000,C3000,C3600, J5000,J5600,J6000, and J7000 systems so that they can run with Z7476AA ACC card. It also improves system dumps after recognizing and resetting LBA during LPMC, TOC, or panics. PHSS_21620: HANG CORRUPTION OTHER This patch is critical for B1000,C3000,C3600, J5000,J5600,J6000, and J7000 systems so that they can run with B5506A ethernet card without data corruption and fix a RS232 hang during early chassis codes for 3 wire RS232 connections,and read status command to fix a Mitsumi CD ROM problem on B2K. PHSS_21082: OTHER This patch is critical for B1000,C3000,C3600, J5000,J5600,J6000, and J7000 systems so that they can run with 64 bit PCI cards in configurations running 11.00 and with more than 4GB of memory. PHSS_19794: HANG OTHER This patch is critical for B1000, C3000 and J5000 systems so that they can run the 11.00 operating system. It is also critical because newer memory modules may not work with firmware versions 1.9 and earlier. Path Name: /hp-ux_patches/s700/10.X/PHSS_25981 Symptoms: PHSS_25981: Same PDC 5.0 firmware as PHSS_24104. DO NOT re-apply to systems that have already been updated. This patch roll is exclusively to address a problem seen when loading PHSS_24104 on an Ignite-UX system. The error message reported is: TEST: run_cmd_wait ("/var/adm/sw/products/PHSS_24104/pfiles/iux_postload") ERROR: Cannot find the utility: lifcp DEBUG: sigchld: wait'ed on process: 904 (last_pid=904) ERROR: The script: "/var/adm/sw/products/PHSS_24104/pfiles /iux_postload" failed, exit code was 1. The solution was modified to ad /usr/bin to the path in the "iux_postload" file: PATH="${SW_PATH%:}:/usr/sbin:/usr/lbin/sw:/usr/bin" PHSS_24104: This patch fixes the J6000 external SCSI port definition and makes some changes to I/O addressing. PHSS_23184: This patch fixes a possible mismatch of refresh rates between 1GB DIMM pairs. The mismatch would keep the pair of DIMMs from being utilized as a active pair. PHSS_22900: This patch fixes a possible data integrity problem between the PCI slots and the I/O controller on the J6000. The patch will limit the J6000's PCI slot 1 to a data transfer rate of 256MB/sec. The other two slots are unaffected. PHSS_22573: This patch improves HPMC dumps and properly updates a timestamp value, prevents a graphics card from hanging during a HPMC/TOC/panic dump (done in 4.5). PHSS_22474: This patch revises the FASTBOOT message to print "NOTICE" rather than "WARNING". It adds support for the Z7476AA ACC card. It improves system dumps by recognizing and resetting LBA during LPMC, TOC, or panics. This update will change the system firmware revision to 4.5 unless it is at 4.5 or greater. PHSS_21620: This patch will add support for J6000,fix a cache selftest failure,fix LPMC handler so it doesn't touch any RDR registers during processing,enables support for B5509BA ethernet card,fix PCI memory allocator to support J3525A, J3526A X.25 cards,fix a RS232 hang during early chassis codes for 3 wire RS232 connections,and read status command twice to fix a Mitsumi CD ROM problem on B2000. This update will change the system firmware revision to 4.0 unless it is at 4.0 or greater. PHSS_21082: This patch will fix a system configuration problem that can allow system hangs,HPMC halts, or undetected data corruption in systems that use 64 bit PCI cards with more than 4GB of memory running HP-UX 11.00. This update will change the system firmware revision to 3.5 unless it is at rev 3.5 or greater. PHSS_19794: This patch provides new functionality to support HP VISUALIZE-fxe graphics. This patch provides a firmware update, loadable from HP-UX, for 9000/785/B1000, 9000/785/C3000 and 9000/785/J5000 systems to firmware revision 3.1. If your system is already running firmware revision 3.1 (or later), loading this patch will not cause your firmware to be changed. These platforms require firmware revision 1.9 or later to run the 11.00 release of HP-UX. Defect Description: PHSS_25981: Same PDC 5.0 firmware as PHSS_24104. DO NOT re-apply to systems that have already been updated. This patch roll is exclusively to address a problem seen when loading PHSS_24104 on an Ignite-UX system. The error message reported is: TEST: run_cmd_wait ("/var/adm/sw/products/PHSS_24104/pfiles/iux_postload") ERROR: Cannot find the utility: lifcp DEBUG: sigchld: wait'ed on process: 904 (last_pid=904) ERROR: The script: "/var/adm/sw/products/PHSS_24104/pfiles /iux_postload" failed, exit code was 1. The solution was modified to ad /usr/bin to the path in the "iux_postload" file: PATH="${SW_PATH%:}:/usr/sbin:/usr/lbin/sw:/usr/bin" PHSS_24104: This patch fixes the J6000 external SCSI port definition and makes some changes to I/O addressing. PHSS_23184: This patch will have the system refresh 1GB DIMMs at 7.5us to prevent any mismatch of refresh rates. This patch also allows the ClearFifo function to save the LVDS pat enable value. PHSS_22900: This patch correct the effects of some misconfigured wires on the PCI to I/O controller bus on the J6000. PHSS_22573: This patch updates a timestamp value during each call to PDC_CHASSIS during a HPMC. PHSS_22474: This patch improves system dumps by recognizing and resetting LBA during LPMC, TOC, or panics. It revises the FASTBOOT message to print "NOTICE" rather than "WARNING" and adds support for the Z7476AA ACC card. PHSS_21620: This patch will fix a cache selftest failure,fix LPMC handler so it doesn't touch any RDR registers during processing,fix PCI memory allocator to support J3525A, J3526A X.25 cards, fix a RS232 hang during early chassis codes for 3 wire RS232 connections,and read status command twice to fix a Mitsumi CD ROM problem on B2000. PHSS_21082: This patch corrects a register value in the PCI bridge controller to prevent setting address bit 32 to 0 on transactions mastered by fast 64 bits PCI cards into system memory on systems with more than 4GB of memory running on 11.00. This firmware patch turns the PA8600 CPU Data Cache LRU off and improves SYNC_OUTDLY setting. In GRAPHICS, it disable accesses to expansion ROM if ROM is memory-mapped and card has single decoder. PHSS_19794: This patch provides an easy mechanism to update the firmware of a B1000, C3000 or J5000 system. New funtionality to support HP VISUALIZE-fxe graphics. SR: 8606104808 Patch Files: /usr/conf/reflash /usr/conf/pdc.wrap /usr/conf/modelstr what(1) Output: /usr/conf/reflash: Firmware reflash utility version 1.1 for 9000/785 B/C/J PCXW/W+ workstations /usr/conf/pdc.wrap: Data Hdr A.00.01 Build user: Firmware Builder Build login: fwbtr@firmbert.fc.hp.com Build directory: /home/fwbtr/work/sprockets/src/bch Build date: Thu Jan 11 17:24:28 MST 2001 Build type: wide Makerom options: Build options: -USIM -USIM_FAST -USIM_CANT -UCACHE_LINE_32B -UELAPSED_TIME -UKEY232 -UTEMP_BIKE -UDEBUG_STACK -UTEMP_IODC_TRACE -UTEMP_DISABLE_DWIDE -DTEMP_LDB_CONSOLE -DTEMP_NO_8051 -UNO_COHERENT -DTEMP_PDC_TRACE -UTEMP_PSEUDO_BOOT -DTEMP_TRACE -UPCI_TRACE -ULAN_DEBUG_ENTRY_POINTS -DDUET -DTEMP_HPUX_64BIT /usr/conf/modelstr: modelstr $Revision: 1.1 $ PATCH_11.00 (PHCO_15048) PATCH-PHCO_17381 for 10.20; for 10.30, 11.x compatibility libc.a_ID@@/main/r10dav/libc_dav/15 /ux/core/libs/libc/archive_pa1/libc.a_ID Mar 9 1999 13:52:37 cksum(1) Output: 2713464597 24770 /usr/conf/reflash 101534573 1049856 /usr/conf/pdc.wrap 1596174293 12348 /usr/conf/modelstr Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: 9000/785/B1000 9000/785/B2000 9000/785/C3000 9000/785/C3600 9000/785/J5000 9000/785/J5600 9000/785/J6000 9000/785/J7000 Other Dependencies: None Supersedes: PHSS_19794 PHSS_21082 PHSS_21620 PHSS_22474 PHSS_22573 PHSS_22900 PHSS_23184 PHSS_24104 Equivalent Patches: PHSS_25982: s700: 11.00 PHSS_25983: s700: 11.11 Patch Package Size: 1130 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHSS_25981 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHSS_25981.depot By default swinstall will archive the original software in /var/adm/sw/patch/PHSS_25981. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. WARNING: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHSS_25981.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHSS_25981.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: Loading this patch on a system other than a B1000, B2000 C3000, C3600, J5000, J5600, J6000 or J7000 system will have no effect.