Patch Name: PHNE_9032 Patch Description: s700 10.01 ARPA Transport patch Creation Date: 96/10/25 Post Date: 96/10/29 Hardware Platforms - OS Releases: s700: 10.01 Products: N/A Filesets: Networking.NET-KRN Automatic Reboot?: Yes Status: General Superseded Critical: Yes PHNE_9032: PANIC Path Name: /hp-ux_patches/s700/10.X/PHNE_9032 Symptoms: PHNE_9032: See Defect Description Defect Description: PHNE_9032: ( SR number: 5003342071 ) ping can cause panic. SR: 5003342071 Patch Files: /usr/conf/lib/libinet.a(ip_input.o) what(1) Output: /usr/conf/lib/libinet.a(ip_input.o): PHNE_9032 ip_input.c $Revision: 1.5.101.8 $ $Date: 9 6/10/24 17:26:15 $ cksum(1) Output: 282083609 17264 /usr/conf/lib/libinet.a(ip_input.o) Patch Conflicts: None Patch Dependencies: s700: 10.01: PHNE_8168 Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: None Patch Package Size: 70 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_9032 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_9032.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_9032.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_9032. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_9032.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_9032.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: Due to the critical nature of this defect, HP is introducing this as a non-cumulative patch. As a result the current ARPA Transport cumulative patch, PHNE_8168 must be installed before PHNE_9032. The two can be installed in the same session and swinstall will insure that PHNE_8168 is loaded first. The installation of PHNE_9032 will fail if PHNE_8168 is not installed.