Patch Name: PHNE_8828 Patch Description: s700 10.10 OTS C.06.00 cumulative mega patch Creation Date: 97/02/26 Post Date: 97/03/12 Hardware Platforms - OS Releases: s700: 10.10 Products: OTS/9000 C.06.00 Filesets: OTS9000.APLI-PRG,C.06.00 OTS9000.OTS-KRN,C.06.00 OTS9000.OTS-MAN,C.06.00 OTS9000.OTS-RUN,C.06.00 OTS9000.ROSE-PRG,C.06.00 OTS9000.OTS-SES-PRG,C.06.00 Automatic Reboot?: Yes Status: General Superseded Critical: No (superseded patches were critical) PHNE_7406: PANIC PHNE_6725: PANIC Path Name: /hp-ux_patches/s700/10.X/PHNE_8828 Symptoms: PHNE_8828: 1. Osiconf will not allow preferred multiplexing class to be set to 3. 2. Shell scripts rely on transition links in 10.X releases of OTS. 3. Osiadmin coredumps (not a panic) when you exit to a shell and return. 4. OTS - osiconf does not allow RFC1006 to be configured on some interfaces. 5. OSIDIAG allows for testing of 2 of the 5 supported LAN cards status. 6. osipdufmt -r does not put any timestamps into the formatted output, and it only formats RFC1006 PDUs. It is desirable to have other PDUs formatted as well. 7. OTS ESH packets are not sent out according to snet_esh_ctimer. If snet_esh_ctimer < 10, then ESHs are sent every 10 seconds, and it seems to use 10 second increments. 8. OTS APLI problem with encoding of CPR-PPDU - invalid PCDRL. 9. OTS could not make connection to a remote node through X.25 when the X.25 subnet was configured to use 1980 standards with a NULL subaddress and snet_bind_by_pid was set to one. 10. When OTS is configured over RK6, the IP address supplied by the application in osi_rgr_rq() is not transmitted to the peer. 11. There's an invalid TPDU number when the tpcons_propose_ext_fmt parameter is set to 1. 12. OTS does not conform to INTAP standards - ASN.1 TLV NULL values. 13. OTS returns OPI_ERR(0x8422) instead of ESPABID(0x1407) when an invalid NSAP address is used. 14. SESSION API, osi_rgr_rq() with no_of_connections parameter set to a value greater than 1024 returns osierrno : OSIEBADRNG. 15. OTS sends ESH out on the wrong lan card. 16. A TP3 CR could be interpreted as TP2 with flow control. PHNE_8223: 1. Additional Functionality: TP3 over CONS is added to OTS. 2. The retransmission timer doesn't work as expected. 3. System panicked when it was idling. Panic message: Data page fault 4. System panicked when a FTAM connection is being established. Panic message: INTERNAL ERROR: Illegal RCI operation 5. MSDSG doesn't work. 6. ots_get_layer_stats does not return 0 when successful. 7 a) osipdufmt doesn't handle -l option correctly. b) osipdufmt doesn't handle pdus across multiple X.25 packets c) odipdufmt doesn't format RFC1006 traces. 8. a) With multiple X.25 cards configured, no LAN; all cards in both CLNS and CONS subnets and any card's, other than the first's, X.121 address in the ots_dests file, a loopback(transport) test after doing an x25init of all cards will cause a system panic. b) With a single X.25 card configured in a CLNS subnet and no LAN subnet configured, the CLNS X.25 subnet will not work. One will not be able to make connections or transfer data. A simple loopback(transport) test will fail. PHNE_7782: 1. Additional Functionality: As an enhancement to OTS it now supports configuration of alternate physical addresses in dest entries associated with CONS/X.25 subnetworks. This is provided via dest_alt_phys_address lines in ots_dests. It is also supported via -a options in the otsaddes command. Otsdeles and otsshowes were also changed to support the alternate physical address functionality. Additionally the parameter snet_ises in the ots_subnets file can now be set to a value of 0. This is for FDDI and LAN. With it set to 0 no end system hellos will be generated. PHNE_7406: 1. The files OTSconfigSAP and OTSconfigSBN in /var/opt/ots are created by otsstart with global write permission. 2. The commands otsaddis, otsaddroute, and otsdelroute return the k-shell error ksh: syntax error: `else' unexpected 3. If Dart 28 version of X.25 is installed with OTS on an MP system then panics will occur. 4. On MP systems using RFC1006 data may be sent out of order, which manifests itself as data corruption PHNE_6725: 1. If CLNP is configured using NULL subset (subset 0), then there will be data corruption. 2. A user application using the ROSE API core-dumps if a NULL ubuf->buf pointer is used on a reject reply. 3. Session api demo program will not run over lan. Problem only shows up when rfc1006 is not configured. When you run the client demo program you will see errors osi_get_event: receives unexpected message 1407 Client: abnormal termination, exit code = -999 4. User application making a call to ap_snd() will hang. If APRI tracing is turned on, user will find that ai_putmsg() is looping. 5. In an MSDSG configuration NODE(A) <----> NODE(B) <---> NODE(C) Where: NODE(A) is configured as LAN only NODE(B) is configured as an MSDSG relay node and is configured both for X.25 CONS and LAN. NODE(C) is configured for X.25 CONS. When NODE(A) initiates a connection with NODE(C) via MSDSG on NODE(B), sometimes NODE(B) will panic when the connection disconnects. Apparently this problem is limited to situations where NODE(B) is running High Perf X.25. It doesn't seem to happen with Classic X.25. 6. User sees files with names of the form Saannnnn accumulate in /usr/spool/sockets/osi. Where: aa is a string of two alphabetic characters which may be either upper or lower case. nnnnn is a process id number. These files are created by FTAM. 7. OTS osipdufmt does not interpret X.25 nettl traces, no output is generated. 8. A kernel panic happens when no OTS subnets are configured and the user runs otsaddnsap. 9. OTS osidiag "WAN X.25 Tests" display inappropriate NSAP information. When "Connect" is selected, the test displays "x25_calling_nsap" and "x25_called_nsap" values which were choosen by osidiag, but are unlikely to be used in the test. The NSAPs should be set by the user when a "ISO 8878 Encoding" test is run. 10. A ROSE application which calls ap_rcv could go into an infinite loop. 11. Session connection rejects occur if remote vendors protocol supplies a TSDU Max Size other then NULL in the connection accept packet. 12. A ROSE application which sends data larger than 65500 bytes will get truncated packets on the receiving side. 13. In osidiag, "Status" test fails under FTAM tests. 14. A ROSE application will core-dump if a NULL ubuf pointer is used on a ROSE API call. 15. The system may hang for 30+ seconds, when using the FTAM responder accessing OTS via the XTI t_bind call with qlen greater than 8196. 16. OTS panics when FTAM attempts to open a connection. The panic occurs only when one or more CONS/X.25 subnets are configured, no LAN or CLNS/X.25 subnets are configured, the remote ftam responder is configured in remote_app, and the remote NSAP is not configured in ots_dests. The panic occurs in ERcMultiFail as a "Data page fault". 17. Additional feature: APIs for adding, deleting dynamic NSAPs and listing all NSAPs for a particular network service. These are otsaddnsap, otsdelnsap and otsshownsaps. These APIs provide the same functionality as the scripts otsaddnsap, otsdelnsap, and otsshownsaps. These routines are provided in libotsadm.a and libotsadm.sl A new header file, otsadmin.h, is also being supplied with this API. The man pages for these APIs are in the section 3 of the OTS manpages. Defect Description: PHNE_8828: 1. The JAM screen regular expression was not updated to reflect the new functionality. 2. The OTS product for ALL 10.X versions shipped shell scripts with either "/bin/sh" or "/bin/ksh". These will only work for system with transition links. It is an option when installing a system not to have transition links. To be fully comaptible with all the systems these references must be changed to "/usr/bin/sh". 3. The JAM osiadmin main menu return pointer (ui_init_ptr) was not initialized. 4. The method used by OSICONF to check the IP address was not sufficient to locate all IP addresses on all lan cards. 5. The code had a wrong interpretation of the 'dl_next_offset' field, and the AREA_SIZE definition was too small to hold data with many structures sent back by PPA_INFO_ACK. 6. The AWK script which preprocesses the output from NETTL was not including timestamp information. The -r option was designed to ignore all but RFC1006 trace entries. 7. The current timer value in e2ittim() is decremented by 10 at each call and then the timer value is checked for expiration. The timer granularity was 10 sec, and the same timer was used for ESH and RIB. 8. On receiving a Connect Presentation(CP) PPDU with invalid Calling-Presentation-selector from connection initiator, OTS responder encodes the Connect Presentation Reject(CPR) PPDU with a wrongly encoded PCDRL and provider-reason. 9. OTS did not bind correctly to the 1980 X.25 PID even though the configuration is set to the 1980 standard. 10. The default IP address of the card (which is configured with ifconfig) was being sent to the remote application. RK6 was not doing an explicit bind of the local address. So the default was being picked up. 11. When the tpcons_propose_ext_fmt parameter is set to 1, the sequence numbering in the Transport PDU is incorrect, that is, it is 0, 2, 4 etc. instead of 0, 1, 2.. and the receiver closes the connection. 12. When P-selectors are configured as NULL for ftam initiator and responder(ae_local_paddr in local_app), the P-selectors sent in CP, CPA and CPR PPDUs are ASN.1 encoded as NULL with length as zero and no value. INTAP standard requires such P-selectors to be absent from the PDUs, these being optional fields of the PDUs. 13. When OTS is configured with only an RFC1006 subnet and an attempt is made to access a non-RFC1006 NSAP, OTS returns OPI_ERR(0x8422) instead of ESPABID(0x1407). OPI_ERR is not a known event as far as X.400 is concerned and so its state machine gets into an indeterminate state from which it is unable to recover. 14. The maximum number of connections supported at the session level is supposed to be 4096 for both OTS C.05.02 through C.07.00. But the maximum number of connections in transport over CLNS is 1024. The no_of_connections parameter was being checked against 1024 instead of 4096. 15. The parameter 'snet_esis' set to 0 prevents a subnet's ESH from being sent. Despite this, a non-HP machine sending out a DC (Disconnect Confirm) to an ALLES address, triggers the sending of an ESH for all LAN subnets. The fix, suppresses sending out an ESH upon receiving a DC on ALLES address. 16. Combining TRS_FLW (defined as 0x10) with TRS_CLASS2 (defined as 0x20), will conflict with newly added TRS_CLASS3 (0x30). Also, it would make the code easier to understand, since the value passed to TPI is consistent with transport context (ctxp->tccnfc). PHNE_8223: 1. Additional functionality. 2. As tp4clns_maxret = 1000, we should never spend more than than 1000 deciseconds (1 decisecond = 1/10 of a second) between two successive retransmissions. The limit is not checked, before the retransmission timer is increased. 3. The routing mechanism was trying to access a routing entry which was not valid any more. The fix is to verify the entry before referencing it. 4. A RCI pointer was set properly. It ended up pointing to the wrong data structure. Now the fix is to ensure proper initialization of this pointer. 5. Changes to provide OSIPING added an additional network SAP (#72) to the static configuration. At startup time OTS initialization places the address of the CLNS Network SAP in each of the CONS and CLNS SATs. The algorithm assumed that the CLNS Network SAP would be the last Network SAP in the configuration. This is no longer true, the OSIPING SAP is 72, and the CLNS SAP is 70 and thus 72 was being placed in both SATs. MSDSG looks in the CONS SAT, finds the wrong SAP number and promptly fails. 6. rocedure did not do an explicit return(0) when successful. 7. a) missing shift in KSH script b) The more bit processing was incorrect. c) No support provided for processing RFC1006 traces existed in osipdufmt. 8. A local attachment pointer was not set properly. In the case of CLNS/X.25 without LAN, the CLNS master SAP(21) was occupied by X.25 . All X.25 code assumed that the saphctx field of the SAP would point to a local attachment structure, which was not true for the CLNS master SAP. The fix was to check explicitly to see if we are handling a CLNS master SAP and to treat it as a special case. PHNE_7782: 1. Additional functionality. PHNE_7406: 1. OTSSTART is setting the umask to 0. 2. Each of the scripts for otsaddis, otsaddroute, and otsdelroute were missing a necessary "then". 3. The X.25 product was modified for MP systems, and these changes cause OTS to panic. 4. Streams changed on 10.x so that pending outbound data is not always visible to OTS. Therefore OTS occasionally sends data when there is other pending outbound data unsent. PHNE_6725: 1. This problem is caused by decoding a header that does not exist. osiping and CLNI do not work for subset 0, since they require the CLNP header to decode the echo request and echo response PDUs. Problem with data corruption is fixed 2. The ROSE library tried to dereference the pointer without first checking it, hence the core-dump. The ROSE library now performs proper check on pointer. 3. Session returned bad information from ses_reg_rq which made the binding in ses_con_rq fail. 4. The kernel flow control module returns invalid flow control information during an ap_open() call. This invalid information causes ai_putmsg(), an internal library function, to loop. The kernel flow control module now returns valid information 5. A missing call to create a trace header in the module tr4sub.c is resulting in memory corruption of OTS data structures. The nature of the panic depends on which data structure gets corrupted and when the corrupt data is accessed. This only happens when the MSDSG relay function is operating and is associated only with disconnect processing. The code has been modified to create the necessary trace header so that the memory corruption does not occur. 6. FTAM cannot determine whether or not it is safe to delete files of the form Saannnnn in /usr/spool/sockets/osi. Apparently, this can only be safely done by OTS during stack startup. OTS now removes these files. 7. The shell script osipdufmt was not modified to correctly handle the new X.25 formatter output under HP-UX 10.X. This is fixed in this patch. 8. An end system hello is sent for the NSAP that has just been added. The sap table is not initialized and a null pointer is dereferenced. 9. OTS osidiag initialized the NSAPs even though they are unlikely to be used, and all values set are displayed. With this patch osidiag does not initialize the NSAPs. 10 ap_rcv() calls a decoding routine in the ROSE library to decode an incoming ROSE result indication. But the decoder returns a negative data length, which causes ap_rcv() to loop. ap_rcv() will now check for a valid data length. 11. The OTS product never proposes a TSDU Max Size in the Session connect request and always expects in the accept a TSDU Max Size of NULL or none at all. The fix is to ignore TSDU Max Size. 12. The ROSE library does not correctly encode the length field if it requires more than 2 bytes. The fix is to correctly encode a length requiring more than 2 bytes. 13. The wrong location was being used for the FTAM utility osistat. 14. The ROSE library tried to dereference the pointer without first checking it, hence the core-dump. The fix is to ensure the pointer is not NULL before dereferencing it. 15. OTS transport limits the number of outstanding connect indications (qlen) to 255 or 1/2 the remaining contexts whichever is lower. There is a logic error in the code that allowed qlen to exceed the limit and caused the problem. The fix enforces the qlen limit. 16. The panic occurs when ERcMultiFail() tries to dereference a NULL pointer. The pointer is now checked. SR: 4701336867 1653184358 1653181636 4701325464 1653194142 1653190223 4701338129 1653182071 5003347740 1653199059 1653193128 1653200253 1653199778 1653190926 1653180448 1653182170 5003335968 1653182915 4701332593 1653181628 4701335182 1653157958 5003275693 1653159491 5003304972 5003306175 1653163683 1653164012 1653165019 1653162081 1653157875 Patch Files: /opt/ots/conf/lib/libotsam.a /opt/ots/lib/osiconf/osiconf.lib /opt/ots/lbin/otsconstat /opt/ots/bin/otslaystat /opt/ots/bin/setnet /opt/ots/bin/osipdudump /opt/ots/bin/otsturbo /opt/ots/bin/otsshownsaps /opt/ots/bin/otsaddnsap /opt/ots/bin/otsbulliop /opt/ots/bin/otsdelnsap /opt/ots/bin/otsintap /opt/ots/lbin/osiadminx /opt/ots/lib/libotss.sl /opt/ots/lib/libotss.a /opt/ots/bin/otsaddes /opt/ots/bin/otsaddis /opt/ots/bin/otsaddroute /opt/ots/bin/otsdeles /opt/ots/bin/otsdelroute /opt/ots/bin/otsshowes /opt/ots/bin/otsstart /opt/ots/bin/osiconfchk /opt/ots/bin/osipdufmt /opt/ots/include/otsadmin.h /opt/ots/lbin/bin2conf /opt/ots/lbin/conf2bin /opt/ots/lbin/osiconfx /opt/ots/lbin/osidiagx /opt/ots/lbin/otstrans /opt/ots/lib/OTShardconf /opt/ots/lib/libapli.a /opt/ots/lib/libapli.sl /opt/ots/lib/libotsadm.a /opt/ots/lib/libotsadm.sl /opt/ots/lib/librose.a /opt/ots/lib/librose.sl /opt/ots/lib/nls/msg/C/osiconfchk.cat /opt/ots/lib/nls/msg/C/osidiag.cat /opt/ots/man/man1m.Z/otsaddes.1m /opt/ots/man/man1m.Z/otsdeles.1m /opt/ots/man/man1m.Z/otsshowes.1m /opt/ots/man/man3.Z/otsaddnsap.3 /opt/ots/man/man3.Z/otsdelnsap.3 /opt/ots/man/man3.Z/otsshownsaps.3 /opt/ots/man/man1m/osipdufmt.1m what(1) Output: /opt/ots/lib/OTShardconf: OTS: C.06.00 OTShardconf PATCH C.06.00 (PHNE_7781/PHNE_7782) /opt/ots/lbin/bin2conf: OTS: C.06.00 ics.c PATCH C.06.00 (PHNE_7781/PHNE_7782) cv_tbl.c PATCH C.06.00 (PHNE_7781/PHNE_7782) $Revision: 76.152 $ /opt/ots/lbin/conf2bin: OTS: C.06.00 ics.c PATCH C.06.00 (PHNE_7781/PHNE_7782) cv_tbl.c PATCH C.06.00 (PHNE_7781/PHNE_7782) $Revision: 76.152 $ /opt/ots/lib/libapli.a: OTS: C.06.00 al_rcv.c PATCH C.06.00 (PHNE_6724/PHNE_6725) al_utl.c PATCH C.06.00 (PHNE_6724/PHNE_6725) /opt/ots/lib/libapli.sl: OTS: C.06.00 al_rcv.c PATCH C.06.00 (PHNE_6724/PHNE_6725) al_utl.c PATCH C.06.00 (PHNE_6724/PHNE_6725) /opt/ots/lib/libotsadm.a: OTS: C.06.00 oa_laystat.c PATCH C.06.00 (PHNE_8222/PHNE_8223) /opt/ots/lib/libotsadm.sl: OTS: C.06.00 oa_laystat.c PATCH C.06.00 (PHNE_8222/PHNE_8223) /opt/ots/conf/lib/libotsam.a: strosxconf.c PATCH C.06.00 (PHNE_7781/PHNE_7782) FILESET OTS-KRN: libotsam.a: Revision: C.06.00 e2iadm.c PATCH C.06.00 (PHNE_8827/PHNE_8828) e2icstz.c PATCH C.06.00 (PHNE_8827/PHNE_8828) e2isub.c PATCH C.06.00 (PHNE_8827/PHNE_8828) e2xsub.c PATCH C.06.00 (PHNE_8222/PHNE_8223) netcstz.c PATCH C.06.00 (PHNE_8827/PHNE_8828) netmai2.c PATCH C.06.00 (PHNE_7781/PHNE_7782) netmain.c PATCH C.06.00 (PHNE_7781/PHNE_7782) genoeof.c PATCH C.06.00 (PHNE_6724/PHNE_6725) pstsub1.c PATCH C.06.00 (PHNE_8827/PHNE_8828) pstsub2.c PATCH C.06.00 (PHNE_8827/PHNE_8828) sesdec.c PATCH C.06.00 (PHNE_6724/PHNE_6725) tr4cstz.c PATCH C.06.00 (PHNE_8827/PHNE_8828) tr4mai2.c PATCH C.06.00 (PHNE_6724/PHNE_6725) tr4sub.c PATCH C.06.00 (PHNE_8827/PHNE_8828) trscod.c PATCH C.06.00 (PHNE_8222/PHNE_8223) trsdec.c PATCH C.06.00 (PHNE_6724/PHNE_6725) trsmai2.c PATCH C.06.00 (PHNE_8827/PHNE_8828) trssub.c PATCH C.06.00 (PHNE_8827/PHNE_8828) strintses.c PATCH C.06.00 (PHNE_7781/PHNE_7782) strosxint.c PATCH C.06.00 (PHNE_7405/PHNE_7406) strosxmem.c PATCH C.06.00 (PHNE_6724/PHNE_6725) strosxopi.c PATCH C.06.00 (PHNE_8827/PHNE_8828) strosxos.c PATCH C.06.00 (PHNE_6724/PHNE_6725) strosxtool.c PATCH C.06.00 (PHNE_7405/PHNE_7406) strosxtpi.c PATCH C.06.00 (PHNE_8827/PHNE_8828) hp_osxx25.c PATCH C.06.00 (PHNE_8222/PHNE_8223) sx25_lam.c PATCH C.06.00 (PHNE_8827/PHNE_8828) hp_osxfcutil.c PATCH C.06.00 (PHNE_6724/PHNE_6725) strosxrK6.c PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/lib/libotss.a: OTS: C.06.00 /opt/ots/lib/libotss.sl: OTS: C.06.00 /opt/ots/lib/librose.a: ro_encode.c PATCH C.06.00 (PHNE_6724/PHNE_6725) OTS: C.06.00 ro_func.c PATCH C.06.00 (PHNE_6724/PHNE_6725) /opt/ots/lib/librose.sl: ro_encode.c PATCH C.06.00 (PHNE_6724/PHNE_6725) OTS: C.06.00 ro_func.c PATCH C.06.00 (PHNE_6724/PHNE_6725) /opt/ots/lbin/osiadminx: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ OTS: C.06.00 osifuncs.c PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/lib/osiconf/osiconf.lib: None /opt/ots/bin/osiconfchk: OTS: C.06.00 chk_strnge.c PATCH C.06.00 (PHNE_7781/PHNE_7782) structures.c PATCH C.06.00 (PHNE_8222/PHNE_8223) find_line.c PATCH C.06.00 (PHNE_7781/PHNE_7782) add_parms.c PATCH C.06.00 (PHNE_7781/PHNE_7782) cv_tbl.c PATCH C.06.00 (PHNE_7781/PHNE_7782) $Revision: 76.152 $ /opt/ots/lib/nls/msg/C/osiconfchk.cat: OTS: C.06.00 osiconfchk.cat PATCH_C.06.00 (PHNE_7781/PHNE_7782) /opt/ots/lbin/osiconfx: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ OTS: C.06.00 cf_beutils.c PATCH C.06.00 (PHNE_8827/PHNE_8828) cv_tbl.c PATCH C.06.00 (PHNE_7781/PHNE_7782) structures.c PATCH C.06.00 (PHNE_8222/PHNE_8223) /opt/ots/lib/nls/msg/C/osidiag.cat: OTS: C.06.00 osidiag.cat PATCH_C.06.00 (PHNE_7781/PHNE_7782) /opt/ots/lbin/osidiagx: OTS: C.06.00 bit.c PATCH C.06.00 (PHNE_6724/PHNE_6725) lan3_test.c PATCH C.06.00 (PHNE_8827/PHNE_8828) $Header: lan3_test.c,v 1.9 94/07/07 15:54:20 tomh Ex p $ xti_exec.c PATCH C.06.00 (PHNE_8222/PHNE_8223) CMIS/CMIP_version_1.6 @(#) sbm.h, revision 3.0 890801 SYN_body.c CMIS/CMIP_version_1.6.1 ics.c PATCH C.06.00 (PHNE_7781/PHNE_7782) cv_tbl.c PATCH C.06.00 (PHNE_7781/PHNE_7782) addtype.c 2.3 Released: 3/13/88 pdu.c 2.1 Released: 10/4/87 fpdu.c 2.3 Released: 3/13/88 apdu.c 2.2 Released: 3/13/88 apdu.c 2.2 Released: 3/13/88 fpdu.c 2.3 Released: 3/13/88 vd.c 2.3 Released: 8/1/88 directory.c 2.3 Released: 3/13/88 file.c 2.1 Released: 10/4/87 sbmlib.c, revision 1.0 890801 sbmlib.h, revision 3.0 890801 sbm.h, revision 3.0 890801 sbmprv.c, revision 1.0 890801 sbmlib.h, revision 3.0 890801 sbm.h, revision 3.0 890801 /opt/ots/bin/osipdudump: osipdudump PATCH C.06.00 (PHNE_8827/PHNE_8828) OTS: C.06.00 /opt/ots/bin/osipdufmt: OTS: C.06.00 osipdufmt PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/man/man1m/osipdufmt.1m: C.06.00 osipdufmt.1m PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/bin/otsaddes: OTS: C.06.00 otsaddes PATCH C.06.00 (PHNE_7781/PHNE_7782) /opt/ots/man/man1m.Z/otsaddes.1m: None /opt/ots/bin/otsaddis: OTS: C.06.00 otsaddis PATCH C.06.00 (PHNE_7405/PHNE_7406) /opt/ots/bin/otsaddnsap: otsaddnsap PATCH C.06.00 (PHNE_8827/PHNE_8828) OTS: C.06.00 /opt/ots/man/man3.Z/otsaddnsap.3: None /opt/ots/bin/otsaddroute: OTS: C.06.00 otsaddroute PATCH C.06.00 (PHNE_7405/PHNE_7406) /opt/ots/include/otsadmin.h: OTS: C.06.00 /opt/ots/bin/otsbulliop: otsbulliop PATCH C.06.00 (PHNE_8827/PHNE_8828) C.06.00 /opt/ots/lbin/otsconstat: OTS: C.06.00 otsconstat PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/bin/otsdeles: OTS: C.06.00 otsdeles PATCH C.06.00 (PHNE_7781/PHNE_7782) /opt/ots/man/man1m.Z/otsdeles.1m: None /opt/ots/bin/otsdelnsap: otsdelnsap PATCH C.06.00 (PHNE_8827/PHNE_8828) OTS: C.06.00 /opt/ots/man/man3.Z/otsdelnsap.3: None /opt/ots/bin/otsdelroute: OTS: C.06.00 otsdelroute PATCH C.06.00 (PHNE_7405/PHNE_7406) /opt/ots/bin/otsintap: otsintap PATCH C.06.00 (PHNE_8827/PHNE_8828) C.06.00 /opt/ots/bin/otslaystat: OTS: C.06.00 otslaystat PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/bin/otsshowes: OTS: C.06.00 otsshowes PATCH C.06.00 (PHNE_7781/PHNE_7782) /opt/ots/man/man1m.Z/otsshowes.1m: None /opt/ots/bin/otsshownsaps: otsshownsaps PATCH C.06.00 (PHNE_8827/PHNE_8828) OTS: C.06.00 /opt/ots/man/man3.Z/otsshownsaps.3: None /opt/ots/bin/otsstart: OTS: C.06.00 otsstart PATCH C.06.00 (PHNE_8827/PHNE_8828) /opt/ots/lbin/otstrans: HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R evision: 74.03 $ OTS: C.06.00 translib.c PATCH C.06.00 (PHNE_8222/PHNE_8223) genlib.c PATCH C.06.00 (PHNE_8827/PHNE_8828) ics.c PATCH C.06.00 (PHNE_7781/PHNE_7782) cv_tbl.c PATCH C.06.00 (PHNE_7781/PHNE_7782) routelib.c PATCH C.06.00 (PHNE_7781/PHNE_7782) $Revision: 76.152 $ /opt/ots/bin/otsturbo: otsturbo PATCH C.06.00 (PHNE_8827/PHNE_8828) OTS: C.06.00 /opt/ots/bin/setnet: setnet PATCH C.06.00 (PHNE_8827/PHNE_8828) C.06.00 cksum(1) Output: 1088572968 2892 /opt/ots/lib/OTShardconf 3820512851 180224 /opt/ots/lbin/bin2conf 2546503131 184320 /opt/ots/lbin/conf2bin 884855449 708132 /opt/ots/lib/libapli.a 1253448172 688128 /opt/ots/lib/libapli.sl 891456877 17632 /opt/ots/lib/libotsadm.a 615931507 24576 /opt/ots/lib/libotsadm.sl 351125679 1777160 /opt/ots/conf/lib/libotsam.a 2397963545 1895760 /opt/ots/lib/libotss.a 1351593884 2163240 /opt/ots/lib/libotss.sl 646044614 44548 /opt/ots/lib/librose.a 3731780638 53248 /opt/ots/lib/librose.sl 153632699 563952 /opt/ots/lbin/osiadminx 2868410105 55021 /opt/ots/lib/osiconf/osiconf.lib 2266552553 389120 /opt/ots/bin/osiconfchk 3758686631 16313 /opt/ots/lib/nls/msg/C/osiconfchk.cat 22896856 1154856 /opt/ots/lbin/osiconfx 3306953065 354978 /opt/ots/lib/nls/msg/C/osidiag.cat 341370951 7621144 /opt/ots/lbin/osidiagx 1277687730 5881 /opt/ots/bin/osipdudump 836349128 10871 /opt/ots/bin/osipdufmt 4209802540 8048 /opt/ots/man/man1m/osipdufmt.1m 1110035727 17037 /opt/ots/bin/otsaddes 1202482645 3500 /opt/ots/man/man1m.Z/otsaddes.1m 409225359 15368 /opt/ots/bin/otsaddis 181073972 5208 /opt/ots/bin/otsaddnsap 3244479151 2363 /opt/ots/man/man3.Z/otsaddnsap.3 3857021245 6896 /opt/ots/bin/otsaddroute 1186627331 790 /opt/ots/include/otsadmin.h 3289961810 3157 /opt/ots/bin/otsbulliop 2446542958 8194 /opt/ots/lbin/otsconstat 2534690068 7050 /opt/ots/bin/otsdeles 148868161 1422 /opt/ots/man/man1m.Z/otsdeles.1m 3723144052 4726 /opt/ots/bin/otsdelnsap 2066062075 1666 /opt/ots/man/man3.Z/otsdelnsap.3 4080488330 5905 /opt/ots/bin/otsdelroute 2898130999 3178 /opt/ots/bin/otsintap 1573662109 4846 /opt/ots/bin/otslaystat 2474208630 16265 /opt/ots/bin/otsshowes 483424363 921 /opt/ots/man/man1m.Z/otsshowes.1m 3485778889 5003 /opt/ots/bin/otsshownsaps 2552119094 1648 /opt/ots/man/man3.Z/otsshownsaps.3 2805383624 15143 /opt/ots/bin/otsstart 2256733872 640384 /opt/ots/lbin/otstrans 510328395 2677 /opt/ots/bin/otsturbo 1042980011 792 /opt/ots/bin/setnet Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: PHNE_6725 PHNE_7406 PHNE_7782 PHNE_8223 Equivalent Patches: PHNE_8827: s800: 10.10 Patch Package Size: 18370 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_8828 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_8828.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_8828.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_8828. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_8828.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_8828.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: None