Patch Name: PHNE_8826

Patch Description: s700 10.01 OTS/9000 C.05.02 cumulative mega patch

Creation Date: 97/08/04

Post Date:  97/08/22

Hardware Platforms - OS Releases:
	s700: 10.01

Products:
	OTS/9000 C.05.02

Filesets:
	OTS9000.OTS-KRN,C.05.02 OTS9000.OTS-RUN,C.05.02
	OTS9000.OTS-MAN,C.05.02 OTS9000.APLI-PRG,C.05.02
	OTS9000.CLNI-PRG,C.05.02 OTS9000.ROSE-PRG,C.05.02
	OTS9000.OTS-SES-PRG,C.05.02 OTS9000.XAP-PRG,C.05.02

Automatic Reboot?: Yes

Status: General Superseded

Critical:
	Yes
	PHNE_8826: PANIC MEMORY_LEAK
	PHNE_7780: PANIC
	PHNE_7404: PANIC
	PHNE_6723: PANIC

Path Name: /hp-ux_patches/s700/10.X/PHNE_8826

Symptoms:
	PHNE_8826:
	1.  Shell  scripts  rely on  transition  links  in 10.X
	    releases of OTS.
	2.  osiadmin coredumps (not a panic) when you exit to a
	    shell and return.
	3.  OTS  -  osiconf  does  not  allow   rfc1006  to  be
	    configured on some interfaces.
	4.  osipdufmt -r does not put any  timestamps  into the
	    formatted  output, and it only formats RFC1006 PDUs.
	    It is  desirable  to have other PDUs  formatted  as
	    well.
	5.  OTS ESH  packets  are not  sent  out  according  to
	    snet_esh_ctimer.  If  snet_esh_ctimer  <  10,  then
	    ESHs are sent  every 10  seconds,  and it seems  to
	    round it off to a suitable multiple of 10.
	6.  OTS  APLI  problem  with  encoding  of  CPR-PPDU  -
	    invalid PCDRL.
	7.  OTS  could  not make  connection  to a remote  node
	    through X.25 when the X.25 subnet was configured to
	    use  1980  standards  with a  NULL  subaddress  and
	    snet_bind_by_pid was set to one.
	8.  When OTS is  configured  over  RK6, the IP  address
	    supplied by the  application in osi_rgr_rq() is not
	    transmitted to the peer.
	9.  An invalid  TPDU  sequence number is generated when
	    the tpcons_propose_ext_fmt parameter is set to 1.
	10. OTS    returns    OPI_ERR(0x8422)     instead    of
	    ESPABID(0x1407)  when an  invalid  NSAP  address is
	    used.
	11. SESSION API,  osi_rgr_rq()  with  no_of_connections
	    parameter  set to a value greater than 1024 returns
	    osierrno :  OSIEBADRNG.
	12. Memory leak  occurs when an  application  registers
	    and  deregisters  using  Session  API's by  calling
	    osi_rgr_rq()    and    osi_drg_rq()   in   a   loop
	    continuously.
	13. The date  field in  osidiag  when  the  tracing  is
	    enabled depends on the assumption of the date field
	    being less than the year 2000.  This  assumption is
	    no longer valid as one hits the century mark.
	14. On receiving NULL data packets, the system panics.
	15. PHNE_8828 prevents incoming Streams X.25 OTS calls.
	16. If 'otsamd' dies, then at the first attempt to send
	    out an RFC 1006 PDU, the system crashes.
	17. ap_rcv() causes APRI  application to core dump when
	    APRI tracing is enabled.

	PHNE_7780:
	1. Debug messages such as the following were being logged
	   in syslog
	        vmunix: sapsuf=0 for sapnum 89, returning -61
	        vmunix: sapsuf=0 for sapnum 70, returning -61
	2. User calls ses_uabort_rq in the Session layer API. The
	   call returns successfully, but no user-abort packet
	   is sent out by OTS stack.
	3. The retransmission timer doesn't work as expected.
	4. MSDSG doesn't work.
	5. ots_get_layer_stats does not return 0 when successful.
	6. System panicked when it was idling.
	        Panic message: Data page fault
	7. System panicked when a FTAM connection is being
	   established. Panic message:
	        INTERNAL ERROR: Illegal RCI operation
	8. a) osipdufmt doesn't handle -l option correctly.
	   b) osipdufmt doesn't handle pdus across multiple X.25
	      packets
	   c) odipdufmt doesn't format RFC1006 traces.
	9. a) With multiple X.25 cards configured, no LAN; all
	   cards in both CLNS and CONS subnets and any card's,
	   other than the first's, X.121 address in the
	   ots_dests file, a loopback(transport) test after
	   doing an x25init of all cards will cause a system
	   panic.
	   b) With a single X.25 card configured in a CLNS subnet
	   and no LAN subnet configured, the CLNS X.25 subnet
	   will not work. One will not be able to make connections
	   or transfer data. A simple loopback(transport) test will
	   fail.

	PHNE_7404:
	1. The files OTSconfigSAP and OTSconfigSBN in
	   /var/opt/ots are created by otsstart with global
	   write permission.
	2. The commands otsaddis, otsaddroute, and otsdelroute
	   return the k-shell error
	      ksh: syntax error: `else' unexpected
	3. If Dart 28 version of X.25 is installed with OTS on an
	   MP system then panics will occur.
	4. On MP systems using RFC1006 data may be sent out of
	   order, which  manifests itself as data corruption
	   or mysteriously dropping connections.

	PHNE_6723:
	1. User application making a call to ap_snd() will hang.
	 If APRI tracing is turned on, user will find that
	 ai_putmsg() is looping.
	2. In an MSDSG configuration

	 NODE(A)   <---->  NODE(B)  <---> NODE(C)

	 Where:
	 NODE(A)  is configured as LAN only
	 NODE(B)  is configured as an MSDSG relay node and is
	 configured both for X.25 CONS and LAN.
	 NODE(C)  is configured for X.25 CONS.

	 When NODE(A) initiates a connection with NODE(C) via
	 MSDSG on NODE(B), sometimes NODE(B) will panic when the
	 connection disconnects.  Apparently this problem is
	 limited to situations where NODE(B) is running High Perf
	 X.25.  It doesn't seem to happen with Classic X.25.
	3. User  sees files with names of the form
	 Saannnnn accumulate in /usr/spool/sockets/osi.
	 Where:
	 aa     is a string of two alphabetic characters
	        which may be either upper or lower case.
	 nnnnn  is a process id number.
	 These files are created by FTAM.
	4. OTS osipdufmt does not interpret X.25 nettl traces, no
	 output is generated.
	5. A kernel panic happens when no OTS subnets are configured
	 and the user runs otsaddnsap.
	6. OTS osidiag "WAN X.25 Tests" display inappropriate NSAP
	 information.  When "Connect" is selected, the test displays
	 "x25_calling_nsap" and "x25_called_nsap" values which were
	 choosen by osidiag, but are unlikely to be used in the
	 test.  The NSAPs should be set by the user when a
	 "ISO 8878 Encoding" test is run.
	7. A ROSE application which calls ap_rcv could go into
	 an infinite loop.
	8. Session connection rejects occur if remote vendors
	 protocol supplies a TSDU Max Size other then NULL in the
	 connection accept packet.
	9. A ROSE application which sends data larger than 65500
	 bytes will get truncated packets on the receiving side.
	10. In osidiag, "Status" test fails under FTAM tests.
	11. A ROSE application will core-dump if a NULL ubuf pointer
	 is used on a ROSE API call.
	12. The system may hang for 30+ seconds, when using the FTAM
	 responder accessing OTS via the XTI t_bind call with qlen
	 greater than 8196.
	13. OTS panics when FTAM attempts to open a connection.  The
	 panic occurs only when one or more CONS/X.25 subnets are
	 configured, no LAN or CLNS/X.25 subnets are configured, the
	 remote ftam responder is configured in remote_app, and the
	 remote NSAP is not configured in ots_dests.  The panic
	 occurs in ERcMultiFail as a "Data page fault".
	14. Current users of CLNI (an interface only supported for
	 limited customers) would like the interface to also return
	 IS routing information, in addition to the ES routing
	 information that it is currently providing.

	PHNE_6388:
	1.  The defect report described it as
	 "OSIADMIN reports error: get_x25_dev_status: ioctl failed."

	 If you are using the high-performance X.25 (Streams X.25)
	 link with 2 or more X.25 cards, you may get the following
	 error when you select "Start X.25", "Stop X.25", "Test
	 Connectivity", or "View Configuration" in the osiadmin
	 X.25 menu.

	   "get_x25_dev_status: ioctl failed. errno=223".

	 Also, if you are using the high-performance X.25 link with
	 1 or more X.25 cards, you may get the following error when
	 you start OTS from osiadmin:

	   "Making sure links are running...
	    check_links: Status of /dev/x25_0 - not up after 30 sec
	    Couldn't start all links, starting OTS anyway!"
	2. In osidiag, under "WAN X.25 Tests ->", if you select
	   "Status ...", the test may fail with the following error:

	     test status:  FAILED

	     osidiag: Can't execute x25stat. (BT561)
	     The file "/opt/x25/bin/x25stat" cannot be executed by
	     this process.  Verify current userid and permisssions
	     on this file.

	     ENOENT:  No such file or directory
	3. System Panic with the following markers in the dump:
	            e2xsiger+0x2c
	            e2xdis+0x150
	            prctr42+0x64
	4. APLI initiator sends out multiple association requests to
	 a responder.  The responder sometimes sends back negative
	 responses and closes the endpoints.  The initiator
	 receives user abort requests instead of the negative
	 responses.
	5. When executing otsshowroute or otsaddes a k-shell error
	 is reported complaining an unexpected "else" in the script.
	6. Osidiag transport loopback test fails on a TRANSPAC
	   network when a NULL packet address is used. The X.25
	   subaddress corrupts the NSAP.
	7. Osidiag connect and loopback tests cause a system panic
	 when it tries to connect to invalid NSAPs. The query subnet
	 flag was turned on and there was an IS on the subnet.
	8. OTS panics the system when the CLNP NULL subset is
	 configured. Any incoming PDU will cause the panic.
	9. OTS panics the system when the CLNP NULL subset is
	 configured and an osiping command is executed.
	10. The man page for otsshownsaps appears to be missing.
	11. OTS does not automatically boot because /opt is not
	 mounted.
	12. A user application using the ROSE API core-dumps if
	 a NULL ubuf->buf pointer is used on a reject reply.
	13. Session api demo program will not run over lan.  It
	 only shows up what rfc1006 is not configured.  When
	 you run the client demo program you will see errors

	osi_get_event: receives unexpected message 1407
	Client: abnormal termination, exit code = -999

Defect Description:
	PHNE_8826:
	1.  The OTS product for ALL 10.X versions shipped shell
	    scripts with either "/bin/sh" or "/bin/ksh".  These
	    will only work for systems with  transition  links.
	    It is an  option  when  installing  a system to NOT
	    have transition links.  To be fully compatible with
	    all the systems these references must be changed to
	    "/usr/bin/sh".
	2.  The  JAM   osiadmin   main  menu   return   pointer
	    (ui_init_ptr) was not initialized as a result of which
	    osiadmin coredumps.
	3.  The method  used by osiconf to check the IP address
	    was not sufficient to locate all IP addresses on all
	    lan cards.
	4.  The AWK script which  preprocesses  the output from
	    'nettl' was not including timestamp information.  The
	    -r option was  designed  to ignore all but  RFC1006
	    trace entries.
	5.  The current timer value in e2ittim() is decremented
	    by 10 at each  call and  then the  timer  value  is
	    checked for expiration.  The timer  granularity was
	    10 sec, and same timer was used for ESH and RIB.
	6.  On receiving a Connect  Presentation(CP)  PPDU with
	    invalid   Calling-Presentation-selector    from
	    connection  initiator,  OTS  responder  encodes the
	    Connect   Presentation   Reject(CPR)  PPDU  with  a
	    wrongly encoded PCDRL and provider-reason.
	7.  OTS did not  bind  correctly  to the 1980  X.25 PID
	    even  though the  configuration was set to the 1980
	    standard.
	8.  The  default  IP  address  of the  card  (which  is
	    configured  with  ifconfig)  was being  sent to the
	    remote  application.  RK6 was not doing an explicit
	    bind  of the  local  address.  So the  default  was
	    being picked up.
	9.  When the tpcons_propose_ext_fmt parameter is set to
	    1, the sequence  numbering in the Transport  PDU is
	    incorrect,  that is, it is 0, 2, 4 etc.  instead of
	    0, 1, 2..  and the receiver closes the connection.
	10. When   OTS  is configured  with  only  an  RFC1006
	    subnet  and an attempt is made to access a
	    non-RFC1006  NSAP, OTS returns OPI_ERR(0x8422)
	    instead of ESPABID(0x1407). OPI_ERR  is not a known
	    event  as far as X.400  is concerned  and so its
	    state  machine  gets into an indeterminate  state
	    from  which it is  unable  to recover.
	11. The   maximum   number   of   connections
	    supported  at the  session  level is supposed to be
	    4096 for both OTS C.05.02 through C.07.00.  But the
	    maximum number of connections in transport over CLNS
	    is 1024.  The no_of_connections parameter was being
	    checked against 1024 instead of 4096.
	12. An  application  wishing to register  itself  calls
	    osi_rgr_rq()    which   allocates    memory.   When
	    deregistering,  osi_drg_rq() is called which should
	    deallocate  the  resources,  but  doesn't do it.
	    This was causing memory leak.
	13. The onset of the year 2000  would  result  in major
	    problems with the date field and other date related
	    impacts.  If tracing is turned on when  osidiag  is
	    invoked,  the year  field of the  FORMATTER  FILTER
	    i.e.  time_from <time> <mon/day/year>
	    is just a 2 digit field instead of a 4 digit field
	    and this won't be able to take care of year 2000 and
	    beyond.
	14. On receiving  NULL data packets, an attempt is made
	    to  dereference a NULL data buffer  pointer,  which
	    results in a panic.
	15. The  logic of  deciding  whether  X.25  subnet  was
	    configured  for 1984 or 1988 was  defective  due to
	    which incoming Streams X.25 OTS calls weren't being
	    routed up properly.
	16. When  'otsamd',  which is the  controlling  daemon,
	    dies, it triggers off an  unplumbing of the stream.
	    When 'putnext' is attempted,  there is an invalid Q
	    pointer which triggers the panic.
	17. This  happens in the ap_rcv()  call, due to missing
	    fprintf() format string.

	PHNE_7780:
	1. A debug message was accidentally left in the code.  It
	   is removed with this patch.
	2. OTS stack compares the header size of the ses_uabort_rq
	   against a preconfigured value.  The comparison failed
	   and the request was discarded.  The preconfigured value
	   is wrong, hence the check fails. The value has been
	   fixed.
	3. As tp4clns_maxret = 1000, we should never spend more
	   than 1000  deciseconds (1 decisecond = 1/10 of a second)
	   between two successive retransmissions. The limit is not
	   checked, before the retransmission timer is increased.
	4. Changes to provide OSIPING added an additional network
	   SAP (#72) to the static configuration.  At startup time
	   OTS initialization places the address of the CLNS Network
	   SAP in each of the CONS and CLNS SATs.  The algorithm
	   assumed that the CLNS Network SAP would be the last
	   Network SAP in the configuration.  This is no longer
	   true, the OSIPING SAP is 72, and the CLNS SAP is 70 and
	   thus 72 was being placed in both SATs.  MSDSG looks in
	   the CONS SAT, finds the wrong SAP number and promptly
	   fails.
	5. Procedure did not do an explicit return(0) when
	   successful.
	6. The routing mechanism was trying to access a routing
	   entry which was not valid any more.   The fix is to
	   verify the entry before referencing it.
	7. A RCI pointer was set properly.  It ended up pointing
	   to the wrong data structure.   Now the fix is to
	   ensure proper initialization of this pointer.
	8. a) missing shift in KSH script
	   b) The more bit processing was incorrect.
	   c) No support provided for processing RFC1006 traces
	      existed in osipdufmt.
	9. A local attachment pointer was not set properly.
	   In the case of CLNS/X.25 without LAN, the CLNS master
	   SAP(21) was occupied by X.25 . All X.25 code assumed
	   that the saphctx field of the SAP would point to a
	   local attachment structure, which was not true for the
	   CLNS master SAP. The fix was to check explicitly to
	   see if we are handling a CLNS master SAP and to treat
	   it as a special case.

	PHNE_7404:
	1. OTSSTART is setting the umask to 0.
	2. Each of the scripts for otsaddis, otsaddroute, and
	   otsdelroute were missing a necessary "then".
	3. The X.25 product was modified for MP systems, and
	   these changes cause OTS to panic.
	4. Streams changed on 10.x so that pending outbound
	   data is not always visible to OTS. Therefore OTS
	   occasionally sends data when there is other
	   pending outbound data unsent.

	PHNE_6723:
	1. The kernel flow control module returns invalid flow
	 control information during an ap_open() call.  This
	 invalid information causes ai_putmsg() an internal library
	 function, to loop.  The kernel flow control module now
	 returns valid information
	2. A missing call to create a trace header in the module
	 tr4sub.c is resulting in memory corruption of OTS data
	 structures.  The nature of the panic depends on which
	 data structure gets corrupted and when the corrupt data
	 is accessed.  This only happens when the MSDSG relay
	 function is operating and is associated only with
	 disconnect processing.  The code has been modified to
	 create the necessary trace header so that the memory
	 corruption does not occur.
	3. FTAM cannot determine whether or not it is safe to
	 delete files of the form Saannnnn in
	 /usr/spool/sockets/osi.  Apparently, this can only
	 be safely done by OTS during stack startup.  OTS now
	 removes these files.
	4. The shell script osipdufmt was not modified to
	 correctly handle the new X.25 formatter output under
	 HP-UX 10.X.  This is fixed in this patch.
	5. An end system hello is sent for the NSAP that has just
	 been added.  The sap table is not initialized and a null
	 pointer is dereferenced.
	6. OTS osidiag initialized the NSAPs even though they are
	 unlikely to be used, and all values set are displayed.
	 With this patch osidiag does not initialize the NSAPs.
	7. ap_rcv() calls a decoding routine in the ROSE library to
	 decode an incoming ROSE result indication.  But the decoder
	 returns a negative data length, which causes ap_rcv() to
	 loop. ap_rcv() will now check for a valid data length.
	8. The OTS product never proposes a TSDU Max Size in the
	 Session connect request and always expects in the accept a
	 TSDU Max Size of NULL or none at all.  The fix is to
	 ignore TSDU Max Size.
	9. The ROSE library does not correctly encode the length
	 field if it requires more than 2 bytes.  The fix is to
	 correctly encode a length requiring more than 2 bytes.
	10. The wrong location was being used for the FTAM utility
	 osistat.
	11. The ROSE library tried to dereference the pointer
	 without first checking the it, hence the core-dump.
	 The fix is to ensure the pointer is not NULL before
	 dereferencing it.
	12. OTS transport limits the number of outstanding connect
	 indications (qlen) to 255 or 1/2 the remaining contexts
	 whichever is lower.  There is a logic error in the code
	 that allowed the qlen to exceed the limit and caused the
	 problem.  The fix enforces the qlen limit.
	13. The panic occurs when ERcMultiFail() tries to
	 dereference a NULL pointer.  The pointer is now checked.
	14. This change is added functionality for CLNI users and
	 TARP developers who desire both ES and IS routing
	 information.  There is no change in the getadj() user
	 interface or syntax. The "type" field of the adj_rsp_t
	 data structure will indicate whether a particular route
	 is for ES or IS.

	PHNE_6388:
	1.The ioctl call X25_RD_IFSTATE was not implemented in
	  high-performance X.25 (Streams X.25) and a different
	  mechanism for verfying the status of X.25 had to be used.
	2.Osidiag tries to execute /opt/x25/bin/x25stat instead of
	  /usr/sbin/x25stat. The new location is for all flavors of
	  X.25 links on HP-UX 10.X and greater.
	3.OTS tries to use an invalid subnet SAP known as a Master
	 SAP. The contents of such a SAP is inconsistent with the
	 operation being performed.  The correct behaviour is to
	 ignore the request which is what the patch accomplishes.
	4.After the negative response is received, an association
	 indication arrives; OTS stack queues the request to the
	 same endpoint.  When ap_close is received from the
	 application, OTS sends out the user abort request. The
	 patch is to declare the endpoints to be valid for one
	 connection only. This patch is for a site specific
	 application.  It needs to be explicitly activated.
	5.The scripts were missing a neccessary "then", which has
	 been added.
	6. otsxt_conid() in sx25_lam.c did not handle the incoming
	 calling address correctly for a TRANSPAC loopback packet.
	7.The timer for CLNS was not set properly, causing
	 an invalid operation.
	8. An uninitialized global variable is being dereferenced
	 when processing incoming PDU. This only occurs when the
	 subset is set to NULL.
	9.An uninitialized global variable is referenced in the
	 process of sending out the CLNP ECHO request with a NULL
	 CLNP subset.
	10. The man page was incorrectly named otsshonsaps.
	11. This problem was introduced in C.05.01. In C.05.01,
	 softlinks were created to /opt for the start up files:
	    /etc/rc.config.d/ots ----> /opt/ots/lbin/ots.rc

	 The fix in C.05.02 corrected the problem for new installs
	 but not for upgrades by installing real ascii files
	 (not links).

	 This patch looks for a softlink and deletes it. It then
	 moves the /opt/ots/lbin/ots.rc ascii file to where the
	 softlink was at /etc/rc.config.d.
	12. The ROSE library tried to dereference the pointer
	 without first checking it, hence the core-dump.
	13. Session returned bad information from ses_reg_rq
	 which made the binding in ses_con_rq fail.

SR:
	4701336867 1653184358 1653181636 1653194142 1653190223
	4701338129 1653182071 5003347740 1653199059 1653200253
	1653199778 1653211466 4701350546 1653208389 4701355776
	1653209338 1653210427 1653218560 1653157958 5003275693
	1653159491 5003304972 5003306175 1653163683 1653164012
	1653165019 1653162081 5000713602 1653140459 1653148783
	1653150003 1653157875 1653180448 1653182915 4701332593
	1653182170 5003335968 1653181628 4701335182

Patch Files:
	/opt/ots/lbin/otsconstat
	/opt/ots/bin/otslaystat
	/opt/ots/bin/setnet
	/opt/ots/bin/osipdudump
	/opt/ots/bin/otsturbo
	/opt/ots/bin/otsshownsaps
	/opt/ots/bin/otsaddnsap
	/opt/ots/bin/otsbulliop
	/opt/ots/bin/otsdelnsap
	/opt/ots/bin/otsintap
	/opt/ots/lbin/osiconfx
	/opt/ots/lbin/otstrans
	/opt/ots/lib/libotss.a
	/opt/ots/lib/libotss.sl
	/opt/ots/lib/libxap.a
	/opt/ots/lib/libxap.sl
	/opt/ots/conf/lib/libotsam.a
	/opt/ots/bin/otsaddes
	/opt/ots/bin/otsshowroute
	/opt/ots/bin/otsstart
	/opt/ots/bin/osipdufmt
	/opt/ots/lbin/osidiagx
	/opt/ots/lbin/osiadminx
	/opt/ots/lib/libapli.a
	/opt/ots/lib/libapli.sl
	/opt/ots/lib/libotsrib.a
	/opt/ots/lib/librose.a
	/opt/ots/lib/librose.sl
	/opt/ots/lib/nls/msg/C/osidiag.cat
	/opt/ots/bin/otsaddis
	/opt/ots/bin/otsaddroute
	/opt/ots/bin/otsdelroute
	/opt/ots/man/man1m/osipdufmt.1m
	/opt/ots/lib/libotsadm.a

what(1) Output:
	/opt/ots/lib/libapli.a:
		OTS: C.05.02
		al_rcv.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		al_utl.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		al_ptrace.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/libapli.sl:
		OTS: C.05.02
		al_rcv.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		al_utl.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		al_ptrace.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/libotsadm.a:
		OTS: C.05.02
		oa_laystat.c PATCH C.05.02 (PHNE_7779/PHNE_7780)
	/opt/ots/conf/lib/libotsam.a:
		FILESET OTS-KRN: libotsam.a: Revision: C.05.02
		e2icstz.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		e2isub.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		e2xsub.c PATCH C.05.02 (PHNE_7779/PHNE_7780)
		netcstz.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		genoeof.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		pstsub2.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		sesdec.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		tr4cstz.c PATCH C.05.02 (PHNE_7779/PHNE_7780)
		tr4mai2.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		tr4main.c PATCH C.05.02 (PHNE_6387/PHNE_6388)
		tr4sub.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		trsdec.c PATCH C.05.02 (PHNE_6387/PHNE_6388)
		trssub.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		strintses.c PATCH C.05.02 (PHNE_7779/PHNE_7780)
		strosxint.c PATCH C.05.02 (PHNE_7403/PHNE_7404)
		strosxmem.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		strosxopi.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		strosxos.c PATCH C.05.02 (PHNE_7779/PHNE_7780)
		strosxtool.c PATCH C.05.02 (PHNE_7403/PHNE_7404)
		strosxtpi.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		hp_osxx25.c PATCH C.05.02 (PHNE_7779/PHNE_7780)
		sx25_lam.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		hp_osxfcutil.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		strosxrK6.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/libotsrib.a:
		adj_init.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		libotsrib: Revision: C.05.02
		getadj_func.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
	/opt/ots/lib/libotss.a:
		OTS: C.05.02
		admlib.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		chnlib.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		inxlib.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/libotss.sl:
		inxlib.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		OTS: C.05.02
		admlib.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		chnlib.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/librose.a:
		ro_encode.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		OTS: C.05.02
		ro_func.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		ro_util.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/librose.sl:
		ro_encode.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		OTS: C.05.02
		ro_func.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		ro_util.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/libxap.a:
		OTS: C.05.02
		xal_ptrace.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/libxap.sl:
		OTS: C.05.02
		xal_ptrace.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lbin/osiadminx:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.01 $
		OTS: C.05.02
		osiutils.c:PATCH_C.05.02 (PHNE_6387/PHNE_6388) $Revi
			sion: 5.9 $ $Date: 95/12/06 12:01:20 $
		osifuncs.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lbin/osiconfx:
		HP92453-02A.10.00 HP-UX SYMBOLIC DEBUGGER (END.O) $R
			evision: 74.01 $
		OTS: C.05.02
		cf_beutils.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lib/nls/msg/C/osidiag.cat:
		OTS: C.05.02
		osidiag.msg PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/lbin/osidiagx:
		OTS: C.05.02
		bit.c PATCH C.05.02 (PHNE_6722/PHNE_6723)
		output.c PATCH C.05.02 (PHNE_8825/PHNE_8826)
		CMIS/CMIP_version_1.6 @(#)
		sbm.h, revision 3.0 890801
		SYN_body.c CMIS/CMIP_version_1.6.1
		addtype.c 2.3   Released: 3/13/88
		pdu.c 2.1   Released: 10/4/87
		fpdu.c    2.3   Released: 3/13/88
		apdu.c    2.2   Released: 3/13/88
		apdu.c    2.2   Released: 3/13/88
		fpdu.c    2.3   Released: 3/13/88
		vd.c  2.3    Released: 8/1/88
		directory.c     2.3    Released: 3/13/88
		file.c  2.1    Released: 10/4/87
		osiutils.c:PATCH_C.05.02 (PHNE_6387/PHNE_6388) $Revi
			sion: 5.9 $ $Date: 95/12/06 12:01:20 $
		sbmlib.c, revision 1.0 890801
		sbmlib.h, revision 3.0 890801
		sbm.h, revision 3.0 890801
		sbmprv.c, revision 1.0 890801
		sbmlib.h, revision 3.0 890801
		sbm.h, revision 3.0 890801
	/opt/ots/bin/osipdudump:
		osipdudump PATCH C.05.02 (PHNE_8825/PHNE_8826)
		OTS: C.05.02 $Date: 95/07/20 17:33:24 $
	/opt/ots/bin/osipdufmt:
		OTS: C.05.02
		osipdufmt PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/man/man1m/osipdufmt.1m:
		C.05.02
		osipdufmt.1m PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/bin/otsaddes:
		OTS: C.05.02:PATCH (PHNE_6387/PHNE_6388)
	/opt/ots/bin/otsaddis:
		OTS: C.05.02
		otsaddis PATCH C.05.02 (PHNE_7403/PHNE_7404)
	/opt/ots/bin/otsaddnsap:
		otsaddnsap PATCH C.05.02 (PHNE_8825/PHNE_8826)
		OTS: C.05.02
	/opt/ots/bin/otsaddroute:
		OTS: C.05.02
		otsaddroute PATCH C.05.02 (PHNE_7403/PHNE_7404)
	/opt/ots/bin/otsbulliop:
		otsbulliop PATCH C.05.02 (PHNE_8825/PHNE_8826)
		C.05.02
	/opt/ots/lbin/otsconstat:
		OTS:   C.05.02
		otsconstat PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/bin/otsdelnsap:
		otsdelnsap PATCH C.05.02 (PHNE_8825/PHNE_8826)
		OTS: C.05.02
	/opt/ots/bin/otsdelroute:
		OTS: C.05.02
		otsdelroute PATCH C.05.02 (PHNE_7403/PHNE_7404)
	/opt/ots/bin/otsintap:
		otsintap PATCH C.05.02 (PHNE_8825/PHNE_8826)
		C.05.02
	/opt/ots/bin/otslaystat:
		OTS:   C.05.02
		otslaystat PATCH C.05.02 (PHNE_8825/PHNE_8826)
	/opt/ots/bin/otsshownsaps:
		otsshownsaps PATCH C.05.02 (PHNE_8825/PHNE_8826)
		OTS: C.05.02
	/opt/ots/bin/otsshowroute:
		OTS: C.05.02:PATCH (PHNE_6387/PHNE_6388)
	/opt/ots/bin/otsstart:
		OTS: C.05.02
		otsstart PATCH C.05.02 (PHNE_7403/PHNE_7404)
	/opt/ots/lbin/otstrans:
		otstrans.c PATCH_C.04.03 (PHNE_5366/PHNE_5367) $ Rev
			ision $ $ Date $
		OTS: C.05.02
		$Header: translib.c,v 5.2 95/06/14 14:30:31 rar Exp
			$
		$Header: applib.c,v 5.1 93/09/21 11:27:56 goo Exp $
		transdef.h PATCH C.05.02 (PHNE_8825/PHNE_8826)
		$Header: sublib.c,v 5.3 95/06/14 14:30:41 rar Exp $
		$Header: routelib.c,v 5.0 93/06/03 13:36:33 goo Exp
			$
		$Header: misclib.c,v 5.1 95/07/21 14:03:20 rar Exp $
		/usr/lib/libc: $Revision: 76.3 $
	/opt/ots/bin/otsturbo:
		otsturbo PATCH C.05.02 (PHNE_8825/PHNE_8826)
		OTS: C.05.02
	/opt/ots/bin/setnet:
		setnet PATCH C.05.02 (PHNE_8825/PHNE_8826)

cksum(1) Output:
	2526167728 740768 /opt/ots/lib/libapli.a
	2499446477 688128 /opt/ots/lib/libapli.sl
	1086901074 12732 /opt/ots/lib/libotsadm.a
	1794674076 1419312 /opt/ots/conf/lib/libotsam.a
	1309858332 9348 /opt/ots/lib/libotsrib.a
	1547913991 528184 /opt/ots/lib/libotss.a
	954926611 487424 /opt/ots/lib/libotss.sl
	691243737 46180 /opt/ots/lib/librose.a
	2288665721 53248 /opt/ots/lib/librose.sl
	2984276287 834680 /opt/ots/lib/libxap.a
	632802396 782336 /opt/ots/lib/libxap.sl
	3702360007 421448 /opt/ots/lbin/osiadminx
	502809690 609864 /opt/ots/lbin/osiconfx
	1190568741 354972 /opt/ots/lib/nls/msg/C/osidiag.cat
	3880175923 1151168 /opt/ots/lbin/osidiagx
	4219862372 5908 /opt/ots/bin/osipdudump
	3085227206 10871 /opt/ots/bin/osipdufmt
	3900884893 8048 /opt/ots/man/man1m/osipdufmt.1m
	1428851873 16112 /opt/ots/bin/otsaddes
	883215521 15375 /opt/ots/bin/otsaddis
	1731606371 4857 /opt/ots/bin/otsaddnsap
	4051262349 6903 /opt/ots/bin/otsaddroute
	3001291993 3157 /opt/ots/bin/otsbulliop
	749321101 8180 /opt/ots/lbin/otsconstat
	2644878103 4726 /opt/ots/bin/otsdelnsap
	3927994734 5912 /opt/ots/bin/otsdelroute
	2155987358 3178 /opt/ots/bin/otsintap
	205983041 4837 /opt/ots/bin/otslaystat
	946612773 4606 /opt/ots/bin/otsshownsaps
	3227108871 6542 /opt/ots/bin/otsshowroute
	2130767135 14932 /opt/ots/bin/otsstart
	3822258327 319488 /opt/ots/lbin/otstrans
	3007041577 2677 /opt/ots/bin/otsturbo
	810783054 626 /opt/ots/bin/setnet

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
	PHNE_6388 PHNE_6723 PHNE_7404 PHNE_7780

Equivalent Patches:
	PHNE_8825:
	s800: 10.01

Patch Package Size: 8480 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHNE_8826

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHNE_8826.depot

	5b. For a homogeneous NFS Diskless cluster run swcluster on the
	    server to install the patch on the server and the clients:

		swcluster -i -b

	    This will invoke swcluster in the interactive mode and
	    force all clients to be shut down.

	    WARNING: All cluster clients must be shut down prior to the
		     patch installation.  Installing the patch while the
		     clients are booted is unsupported and can lead to
		     serious problems.

	    The swcluster command will invoke an swinstall session in which
	    you must specify:

		alternate root path  -  default is /export/shared_root/OS_700
		source depot path    -  /tmp/PHNE_8826.depot

	    To complete the installation, select the patch by choosing
	    "Actions -> Match What Target Has" and then "Actions -> Install"
	    from the Menubar.

	5c. For a heterogeneous NFS Diskless cluster:

		- run swinstall on the server as in step 5a to install
		  the patch on the cluster server.

		- run swcluster on the server as in step 5b to install
		  the patch on the cluster clients.

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHNE_8826.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	Warning: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHNE_8826.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHNE_8826.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	If the optional filesets ROSE-PRG, APLI-PRG, CLNI-PRG,
	XAP-PRG, OTS-SES-PRG or OTS-MAN have not been previously
	installed, then this patch will add new files not previously
	installed on the system.

	If this patch is swremoved, the kernel will have to be
	MANUALLY regened and the system will have to be MANUALLY
	rebooted before it returns to its behaviour which existed
	prior to the patch installation. The kernel library
	/opt/ots/conf/lib/libotsam.a is returned to its previous
	contents before the patch, but the kernel is not regened
	by swremove.