Patch Name: PHKL_20081

Patch Description: s700 10.26 core dump patch

Creation Date: 99/10/08

Post Date:  99/10/15

Hardware Platforms - OS Releases:
	s700: 10.26

Products: N/A

Filesets:
	OS-Core.CORE-KRN

Automatic Reboot?: Yes

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700/10.X/PHKL_20081

Symptoms:
	PHKL_20081:
	A program running at a sensitivity level higher than the
	sensitivity level of the process's current directory may
	not be able to dump core.

Defect Description:
	PHKL_20081:
	Core dump handler could not write to directory in all cases.

	Resolution:
	During the core dump handler, raise the allowmacwrite
	privilege to ensure that the write succeeds.

SR:
	0000000000

Patch Files:
	/usr/conf/lib/libhp-ux.a(pm_core.o)

what(1) Output:
	/usr/conf/lib/libhp-ux.a(pm_core.o):
		99/10/05 kern/sys/pm_core.c, hpux, hpux_10.26, ic5dm
			 Revision 1.8 PATCH_10.26 (PHKL_20081)

cksum(1) Output:
	2522746741 8620 /usr/conf/lib/libhp-ux.a(pm_core.o)

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHKL_20082:
	s800: 10.26

Patch Package Size: 70 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_20081

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHKL_20081.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHKL_20081.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHKL_20081.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_20081.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None