Patch Name: PHKL_19409

Patch Description: s700 10.26 lvlnboot failed from non-root account

Creation Date: 99/09/03

Post Date:  99/10/12

Hardware Platforms - OS Releases:
	s700: 10.26

Products: N/A

Filesets:
	OS-Core.CORE-KRN

Automatic Reboot?: Yes

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700/10.X/PHKL_19409

Symptoms:
	PHKL_19409:
	From an account other than root, lvlnboot command fails
	with an error message:
	lvlnboot: Error in obtaining IODC ioctl address

Defect Description:
	PHKL_19409:
	lvlnboot command issues an io-control to get the starting
	address of IODC table. This fails because the kernel checks
	for super user instead of the devops privilege.

SR:
	0000000000

Patch Files:
	/usr/conf/lib/libhp-ux.a(kepd.o)

what(1) Output:
	/usr/conf/lib/libhp-ux.a(kepd.o):
		99/07/30 kern/pseudo_drivers/kepd.c, hpux, hpux_10.2
			6, ic5db Revision 1.3 PATCH_10.26 (PHKL_1940
			9)

cksum(1) Output:
	230439224 3340 /usr/conf/lib/libhp-ux.a(kepd.o)

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies: None

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHKL_19410:
	s800: 10.26

Patch Package Size: 60 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_19409

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHKL_19409.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHKL_19409.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHKL_19409.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_19409.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None