Patch Name: PHKL_19177

Patch Description: s700 10.26 Enable Superio Parallel interface

Creation Date: 99/09/27

Post Date:  99/11/16

Hardware Platforms - OS Releases:
	s700: 10.26

Products: N/A

Filesets:
	OS-Core.CORE-KRN OS-Core.KERN-RUN

Automatic Reboot?: Yes

Status: General Superseded

Critical: No

Path Name: /hp-ux_patches/s700/10.X/PHKL_19177

Symptoms:
	PHKL_19177:
	Ported 10.20 patch PHKL_17644 to TOS.
	(PHKL_17644)
	This patch enables new functionality which adds new I/O
	drivers to support the B1000, C3000, and J5000 systems.
	In particular this patch enables the superio parallel
	interface.

Defect Description:
	PHKL_19177:
	New functionality to support the B1000, C3000, and J5000
	systems on HP-UX 10.26  The parallel interface on these
	systems can not be used unless this patch is present.
	Resolution:
	Add support for the superio parallel interface.

SR:
	4701398263

Patch Files:
	/usr/conf/lib/libpci.a(ecp_isr.o)
	/usr/conf/lib/libpci.a(ecp_strategy.o)
	/usr/conf/lib/libpci.a(ecp_utils.o)
	/usr/conf/lib/libpci.a(superio_centif.o)
	/usr/conf/master.d/SCentIf

what(1) Output:
	/usr/conf/lib/libpci.a(ecp_isr.o):
		99/07/27 kern/wsio/ecp_isr.c, hpux, hpux_10.26, ic5d
			j Revision 1.1 PATCH_10.26 (PHKL_19177) UNMO
			DIFIED
	/usr/conf/lib/libpci.a(ecp_strategy.o):
		99/07/27 kern/wsio/ecp_strategy.c, hpux, hpux_10.26,
			 ic5dj Revision 1.1 PATCH_10.26 (PHKL_19177)
			 UNMODIFIED
	/usr/conf/lib/libpci.a(ecp_utils.o):
		99/07/27 kern/wsio/ecp_utils.c, hpux, hpux_10.26, ic
			5dj Revision 1.1 PATCH_10.26 (PHKL_19177) UN
			MODIFIED
	/usr/conf/lib/libpci.a(superio_centif.o):
		99/07/27 kern/wsio/superio_centif.c, hpux, hpux_10.2
			6, ic5dj Revision 1.1 PATCH_10.26 (PHKL_1917
			7) UNMODIFIED
	/usr/conf/master.d/SCentIf:
		SCentIf  $Date: 99/04/15 08:09:35 $ $Revision: 1.2.9
			8.3 $ PATCH_10.26 (PHKL_19177) UNMODIFIED

cksum(1) Output:
	1037639190 5436 /usr/conf/lib/libpci.a(ecp_isr.o)
	1033153114 5200 /usr/conf/lib/libpci.a(ecp_strategy.o)
	1660144797 4092 /usr/conf/lib/libpci.a(ecp_utils.o)
	639178368 10124 /usr/conf/lib/libpci.a(superio_centif.o)
	3135485123 5478 /usr/conf/master.d/SCentIf

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies:
	9000/700

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHKL_17644:
	s700: 10.20

Patch Package Size: 100 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_19177

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHKL_19177.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHKL_19177.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHKL_19177.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_19177.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None