Patch Name: PHKL_19122

Patch Description: s700 10.26 Enable Superio Core Interfaces

Creation Date: 99/09/27

Post Date:  99/11/16

Hardware Platforms - OS Releases:
	s700: 10.26

Products: N/A

Filesets:
	OS-Core.CORE-KRN OS-Core.KERN-RUN

Automatic Reboot?: Yes

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700/10.X/PHKL_19122

Symptoms:
	PHKL_19122:
	Ported 10.20 patch PHKL_17645 to TOS.
	(PHKL_17645)
	This patch enables new functionality which adds new I/O
	drivers to support the B1000, C3000, and J5000 systems.
	In particular this patch enables all superio core
	interfaces.  Tt is required to enable the serial, usb,
	ide (cdrom), parallel, and floppy drivers.

Defect Description:
	PHKL_19122:
	New functionality to support the B1000, C3000, and J5000
	systems on HP-UX 10.26.  The core interfaces on these
	systems can not be used unless this patch is present.
	Resolution:
	Add support for the superio core interfaces.

SR:
	4701398263

Patch Files:
	/usr/conf/lib/libpci.a(superio.o)
	/usr/conf/lib/libpci.a(superio_cdio.o)
	/usr/conf/lib/libpci.a(superio_dma.o)
	/usr/conf/lib/libpci.a(superio_int.o)
	/usr/conf/lib/libpci.a(superio_pci.o)
	/usr/conf/master.d/superio

what(1) Output:
	/usr/conf/lib/libpci.a(superio.o):
		99/07/28 kern/wsio/superio.c, hpux, hpux_10.26, ic5d
			j Revision 1.1 PATCH_10.26 (PHKL_19122) UNMO
			DIFIED
	/usr/conf/lib/libpci.a(superio_cdio.o):
		99/07/28 kern/wsio/superio_cdio.c, hpux, hpux_10.26,
			 ic5dj Revision 1.1 PATCH_10.26 (PHKL_19122)
			 UNMODIFIED
	/usr/conf/lib/libpci.a(superio_dma.o):
		99/07/28 kern/wsio/superio_dma.c, hpux, hpux_10.26,
			ic5dj Revision 1.1 PATCH_10.26 (PHKL_19122)
			UNMODIFIED
	/usr/conf/lib/libpci.a(superio_int.o):
		99/07/28 kern/wsio/superio_int.c, hpux, hpux_10.26,
			ic5dj Revision 1.1 PATCH_10.26 (PHKL_19122)
			UNMODIFIED
	/usr/conf/lib/libpci.a(superio_pci.o):
		99/07/28 kern/wsio/superio_pci.c, hpux, hpux_10.26,
			ic5dj Revision 1.1 PATCH_10.26 (PHKL_19122)
			UNMODIFIED
	/usr/conf/master.d/superio:
		superio  $Date: 99/04/15 08:09:36 $ $Revision: 1.2.9
			8.3 $ PATCH_10.26 (PHKL_19122) UNMODIFIED

cksum(1) Output:
	1065927937 2872 /usr/conf/lib/libpci.a(superio.o)
	3397561824 7576 /usr/conf/lib/libpci.a(superio_cdio.o)
	1484546419 5076 /usr/conf/lib/libpci.a(superio_dma.o)
	2405037190 7772 /usr/conf/lib/libpci.a(superio_int.o)
	2585947284 1752 /usr/conf/lib/libpci.a(superio_pci.o)
	2328852506 5448 /usr/conf/master.d/superio

Patch Conflicts: None

Patch Dependencies: None

Hardware Dependencies:
	9000/700

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHKL_17645:
	s700: 10.20

Patch Package Size: 100 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_19122

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHKL_19122.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHKL_19122.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHKL_19122.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_19122.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions: None