Patch Name: PHKL_19027

Patch Description: s700 10.26 Enable 64 bit Core SCSI

Creation Date: 99/09/30

Post Date:  99/11/18

Hardware Platforms - OS Releases:
	s700: 10.26

Products: N/A

Filesets:
	OS-Core.CORE-KRN

Automatic Reboot?: Yes

Status: General Release

Critical: No

Path Name: /hp-ux_patches/s700/10.X/PHKL_19027

Symptoms:
	PHKL_19027:
	Ported 10.20 patch PHKL_17655 to TOS.
	(PHKL_17655)
	This patch enables new functionality that is part of the
	10.20 ACE (Additional Core Enhancements) Workstation bundle.
	It adds new I/O drivers to support the B1000, C3000, and
	J5000 systems.  This patch enables the 64 bit Core SCSI on
	these platforms.

Defect Description:
	PHKL_19027:
	Ported 10.20 patch PHKL_17655 to TOS.
	New functionality to support the B1000, C3000, and J5000
	systems on HP-UX 10.26.  The Core IO on these systems
	uses a 64 bit SCSI chip.  The PCI services will not
	recognize the base address of the chip registers unless this
	patch is present.
	Resolution:
	Change the PCI services to recognize 64 bit BAR's

SR:
	4701398263

Patch Files:
	/usr/conf/lib/libpci.a(pci_wsio.o)

what(1) Output:
	/usr/conf/lib/libpci.a(pci_wsio.o):
		99/07/30 kern/wsio/pci_wsio.c, hpux, hpux_10.26, ic5
			dh Revision 1.1 PATCH_10.26 (PHKL_19027) UNM
			ODIFIED

cksum(1) Output:
	12377674 4268 /usr/conf/lib/libpci.a(pci_wsio.o)

Patch Conflicts: None

Patch Dependencies:
	s700: 10.26: PHKL_17282

Hardware Dependencies:
	9000/700

Other Dependencies: None

Supersedes: None

Equivalent Patches:
	PHKL_17655:
	s700: 10.20

Patch Package Size: 60 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_19027

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHKL_19027.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHKL_19027.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHKL_19027.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_19027.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	This patch depends on base patch PHKL_17282 .
	For successful installation please insure that PHKL_17282
	is in the same depot with this patch, or PHKL_17282 is
	already installed.