UnixWare 7.1.4 Maintenance Pack 2 Release Notes February 2005 Dear SCO Customer, This CD contains UnixWare 7.1.4 Maintenance Pack 2. This Maintenance Pack contains important fixes to your UnixWare system and should be applied at your next maintenance period. ------------------------------------------------------------------------ Contents I. Software Notes and Recommendations. II. Installation Instructions. III. Removal Instructions. IV. Custom CD Creation Instructions. V. Comprehensive List of Problems Fixed. A. Problems Fixed in Maintenance Pack 1. B. Problems Fixed in Maintenance Pack 2. VI. List of Known Issues. VII. File Contents. VIII. Escalation Fixes in this Maintenance Pack. IX. Copyrights. ------------------------------------------------------------------------ I. Software Notes and Recommendations. 1. The UnixWare 7.1.4 Maintenance Pack 2 should only be installed on: UnixWare 7.1.4 2. If you are performing an in place upgrade to UnixWare 7.1.4 from UnixWare 7.1.1, UnixWare 7.1.2 (Open UNIX 8.0.0), or UnixWare 7.1.3, you must reboot the system after upgrading and before installing this maintenance pack. 3. This maintenance pack consists of the following sets and packages: o uw714mp2 - UnixWare 7.1.4 Maintenance Pack 2 Set This set contains the following packages: uw714m2 - UnixWare 7.1.4 Maintenance Pack 2 package libc - Runtime C Library package, version 8.0.2b libthread - Runtime Thread Library package, version 8.0.2a pam - Pluggable Authentication Modules, version 0.77 Please note that the libthread and pam packages have not changed since they were last updated for Maintenance Pack 1. o uw7mpdoc - Updated Base System Guides, version 7.1.4a Please note that this package has not been updated for this maintenance pack. DocView will hence continue to show the maintenance pack as UnixWare 7.1.4 Maintenance Pack 1. o Twenty updated packages: cups - Common Unix Printing System, version 1.1.19-03 foomatic - Foomatic Filters and PPDs, version 3.0.2 hpijs - HP Inkjet Printer Driver, version 1.5-02 ldap - Lightweight Directory Access Protocol services, version 8.0.1a libosr - Runtime OpenServer Libraries, version 8.0.2a libpng - PNG (Portable Network Graphics) Library, version 1.2.7 nd - Network Drivers, version 8.0.2b nics - Network Infrastructure and Configuration Subsystem, version 8.0.2b openssh - Open Secure Shell, version 3.9p1-01 openssl - Open SSL/TLS Cryptography Toolkit, version 0.9.7d openssld - OpenSSL Documentation, version 0.9.7d samba - Samba, version 3.0.10 squid - Squid Caching Proxy Server, version 2.5.STABLE7 uccs - OUDK Optimizing C Compilation System, version 8.0.2b zlib - General Purpose Data Compression Library, version 1.2.1-01 basex - X11R6 Base X Runtime System, version 8.0.2a xserver - X11R6 X Server, version 8.0.2b xclients - X11R6 X Clients, version 8.0.2a xcontrib - X11R6 Contributed X Clients, version 8.0.2b xdrivers - X11R6 Graphics Drivers, version 8.0.2a Please note that the openssl and openssld packages have not changed since they were last updated for Maintenance Pack 1. o Two new optional packages: ipf - IP Filter, version 4.1.3 modjk1 - Additional Modules for Perl, version 2.0.4 Please note that the modjk1 package has not changed since it was last provided with Maintenance Pack 1. 4. An install.sh script is provided to simplify installation, as described in the Installation Instructions section below. Use of this script is highly recommended. The install.sh script installs the following: o The uw714mp2 set. Installing uw714mp2 will update the libc and libthread runtime libraries as well as installing the uw714m2 and pam packages. The runtime libraries, once installed, are not removable. o The uw7mpdoc package. o Newer versions of the updated packages listed above, provided earlier versions of these packages are already installed on your system. Alternatively, with care you can install the packages individually. However, you should note the following: o The uw714mp2 set is required for all systems. o The following packages are required to be updated, that is you need to install them if you have an earlier version installed on your system: cups, openssh, samba, xcontrib o The following packages are strongly recommended: foomatic, libpng, nd, nics, openssl, squid, uccs, zlib, xserver, xdrivers o All other packages are optional. If you did not install some of the above packages when initially installing UnixWare 7.1.4, you can do so using the install.sh script. You do not need to first install the original UnixWare 7.1.4 version. Please refer to the Installation Instructions section below. 5. A mkiso.sh script is provided with this maintenance pack to create custom maintenance pack ISO image files and/or CDs from the original maintenance pack ISO image file or CD, as described in the Custom CD Creation Instructions section below. Notes: o To use this feature, you need the cdrtools package installed. o To burn the custom ISO image file, you also need a writable CD drive and CD Media. 6. This maintenance pack supersedes and obsoletes: uw714mp1 - UnixWare 7.1.4 Maintenance Pack 1 Set ptf9050 - The UnixWare 7.1.4 Licensing Supplement These packages and sets do not need to be removed prior to installing uw714mp2. The installation of uw714mp2 will also lock down these packages and they will no longer be removable. 7. This maintenance pack contains security enhancements, including changes to numerous file and directory permissions. To obtain the full advantage of these enhancements on systems that contain the obsolete scohelp package, it is recommended that you remove the scohelp package prior to installing this maintenance pack. The SCOhelp documentation server has been replaced by DocView since UnixWare 7.1.3. If you have upgraded from a prior release, you can check for the existence of the scohelp package on your system with the command: pkginfo scohelp To remove the package, type the following command as root: /etc/scohelphttp stop Followed by: pkgrm scohelp 8. If you install a package (say acp) from the UnixWare media kit that has been updated by the maintenance pack on a system with the maintenance pack installed, you will see the following warning message: The package was installed after installing the package. WARNING: The package contains updates to the above package(s). Please reinstall the package. Failure to do so may leave your system in an inconsistent state. This warning message will be displayed after every pkgadd until you reinstall the uw714m2 package. To do this, mount the maintenance pack CD and type: pkgadd -d /mount_point/images/uw714mp2.image uw714m2 Then reboot your system: shutdown -i6 -g0 -y 9. For a list of issues that this maintenance pack addresses, please see the Comprehensive List of Problems Fixed section below. 10. For a list of known issues with this maintenance pack, please see the List of Known Issues section below. 11. If you have questions regarding this supplement, or the product on which it is installed, please contact your software supplier or support representative. ------------------------------------------------------------------------ II. Installation Instructions. 1. Log in as root. 2. If you are installing the maintenance pack from CD, insert the maintenance pack CD into the primary CD drive and type: mount /dev/cdrom/cdrom1 /install If you are installing this maintenance pack from the web, download the uw714mp2.iso file to your server from: http://www.sco.com/support/update/download/release.php?rid=58 In the directory where you downloaded the uw714mp2.iso file, type: mount `marry -a uw714mp2.iso` /install 3. Change directory to /install: cd /install 4. To install the required uw714mp2 set and the updated packages on your system, type: ./install.sh [-nv] This will show you a menu screen listing the names of the packages that are part of this maintenance pack. By default, uw714mp2, uw7mpdoc, and updated packages whose earlier versions are already installed on your system are selected for installation. The packages whose earlier versions are not installed on your system are not selected for installation. The packages whose later versions are installed on your system are not listed. Select the packages that you want to install on your system and press "Apply" to continue. Since the menu screen can only display ten packages at a time, pressing "Apply" will show the next list of packages. Pressing "Apply" on the final screen will install the selected packages. The optional -n (non-interactive) flag skips the menu screen and proceeds to install the default selection of packages. The optional -v (verbose) flag provides more status information during the installation. 5. To individually install packages and sets, run the following command: ./install.sh [packages] where packages can be any of the packages listed in section I. 6. After all desired packages are installed, reboot the system by typing: shutdown -i6 -g0 -y ------------------------------------------------------------------------ III. Removal Instructions. 1. Log in as root. 2. To remove the maintenance pack set (except for its library packages, which are not removable), type: pkgrm uw714mp2 Notes: o Removal of the uw714mp2 set is not recommended. o The IP Filter (ipf) and Open Secure Shell (openssh) packages are functionally dependent on the uw714m2 package. These packages will not work if uw714m2 is removed. 3. To fully restore your system to its prior state, reinstall the UnixWare 7.1.4 media kit version of the updated packages. Note: Removal of the updated packages is not recommended. 4. After all the packages are removed, reboot the system by typing: shutdown -i6 -g0 -y ------------------------------------------------------------------------ IV. Custom CD Creation Instructions. 1. Follow steps 1 to 3 of section II. 2. Type ./mkiso.sh This will ask you the name of the ISO image file. Default is /uw714mp2.iso. This will then show you a menu screen listing the names of the packages that are part of this maintenance pack. By default all packages are selected. Unselect the packages that you want to exclude from your custom CD. and press "Apply" to continue. Since the menu screen can only display ten packages at a time, pressing "Apply" will show the next list of packages. Pressing "Apply" on the final screen will create the CD ISO image file. Note: The uw714mp2 package cannot be unselected. 3. To burn the ISO image file, insert the CD media in you CD drive and type: cdrecord -v -dao -speed=16 -fs=10m \ -dev=1,0,1 -driveropts=burnfree filename where dev should be the SCSI target for the CD drive. filename should be the name of your custom ISO image file. Please refer to the cdrecord(1) man page for details. ------------------------------------------------------------------------ V. Comprehensive List of Problems Fixed. A. Problems Fixed in Maintenance Pack 1: ---------------------------------------- The UnixWare 7.1.4 Maintenance Pack 1 set (uw714mp1) contains the following fixes. These fixes are also included in UnixWare 7.1.4 Maintenance Pack 2 set (uw714mp2). o uw714m1 package fixes: Feature and usability enhancements: 1. The following UnixWare 7.1.4 functionality is now provided: o Pluggable authentication modules (PAM) support o Encrypted file system support These features are described in the online documentation that is provided with the uw7mpdoc package that accompanies this maintenance pack. See the "New Features and Notes" section of the online documentation. fz528611 fz529097 2. Intel microcode updates. erg712621/ptf9050/fz529619 3. kcrash macros updates. fz529663 4. Additional source files for DBA usage with MySQL provided with the SCOx enablement package. Modified Makefile, eelsdba_mysql.c, initdb.mysql and README are provided for use with latest MySQL package. fz529851 5. Enabled large file support in compress. fz529876 Security improvements: 6. SECURITY: Some files and directories were created incorrectly allowing write permission to arbitrary users. Some system daemons were running with a file creation mask (umask) set to 0. fz528862 7. SECURITY: Security vulnerability issues in TCP are fixed according to this IETF draft: http://www.ietf.org/internet-drafts/draft-ietf-tcpm-tcpsecure-00.txt erg712598/fz529384 8. SECURITY: Two new inconfig tunables have been introduced to address the TCP Rose Attack: o ip_maxfragpackets: This is the maximum number of fragmented packets that IP will accept. The default is 800. o ip_maxfragsperpacket: This is the maximum number of fragments per packet that IP will accept. The default is 16. erg712605/fz529414 SCOSA-2005.14 Reliability improvements: 9. Fixed panic on errant umem_free() in [g|s]etgroups_sco. fz528775 10. Fixed a memory corruption bug caused by not stopping netbios when the system was brought to init state 1. ptf9050b/fz529565 11. Fixed process hangs due to race between exiting children and SIGCLD processing in the parent. erg712596/fz529361 Networking improvements: 12. Changed use of types u_[short,int,long] to u[short,int,long]_t in since the former are not always defined. fz529581 13. The SHUT_RD, SHUT_WR, and SHUT_RDRW macros in are defined only when at least one XOPEN-ish feature test macro is defined. This is counter to our "everything visible by default" model for headers. The TOG SUS says that SHUT_* macros can be defined in general, so there's no reason not to define these with no conditional inclusion coverage. fz529698 14. Under some circumstances, ppp could go into an infinite loop of read calls in the libnsl ics_read_data() routine. erg712620/fz529611 Installation tools improvements: 15. By the time pkgadd executes the preinstall script of a package, it has already updated the contents file with the information from the package's pkgmap file. Hence if the preinstall script is terminated for some reason, the contents file is left in a bad state - the files are not installed on the system but they are present in the contents file. This has been fixed so that the contents file is not updated until the files are installed. fz519105 16. Fixed a problem where pkginstall, pkgremove and installf can destroy the software contents file if it is already locked by another process. fz198541 Licensing improvements: 17. The license policy daemon ignores custom licenses from earlier releases. For example, if your system license had previously included extra users, not separately licensed but included in your original, those users would be ignored. This has been fixed. ptf9050a/fz529560 o Runtime C Library (libc) version 8.0.2a fixes: 18. Bad parsing of some special strings in string-to-floating code. fz529765 o Runtime Thread Library (libthread) version 8.0.2a fixes: 19. Oracle may hang while starting by going into an infinite loop in libthread's thr_keycreate(). erg712658/fz529884 Additional bug fixes and enhancements were provided with the supplemental packages that were distributed with UnixWare 7.1.4 Maintenance Pack 1. These fixes are also included in the supplemental packages provided with UnixWare 7.1.4 Maintenance Pack 2. o Documentation: 1. The Updated Base System Guides (uw7mpdoc) package, version 7.1.4a, provides documentation for the PAM, encrypted file system, modjk1, and Samba features delivered with uw714mp1 and its supplemental packages. o PAM: 2. The following supplemental packages have been updated to enable support for PAM. They can only be installed if the pam package (contained in uw714mp2 set) is installed: cups - Common Unix Printing System, version 1.1.19-02 openssh - Open Secure Shell, version 3.8.1p1 samba - SMB based file/printer sharing, version 3.0.4 xcontrib - X11R6 Contributed X Clients, version 8.0.2a o The Foomatic Filters and PPDs (foomatic) package, version 3.0.0-02, and the HP Inkjet Printer Driver (hpijs) package, version 1.5-01, contain this fix: 3. Fixed obscure corruption of a few data files. fz529615 o The Netdriver Infrastructure and Configuration Subsystem (nics) package, version 8.0.2a, contains this fix: 4. A time delay of 1 sec in dlpiclose() was causing some applications, e.g. getmany (accessing mib-2 table) to consume large amounts of CPU time. This time delay ensured that all in-transit packets were processed before closing the SAP. This delay is removed and the code reworked to use message based synchronization during closedown. dlpiclose() now constructs a M_CTL packet containing a message of type dl_ctlmsg_t. This message contains DLPI primitive set as DL_CLOSESAP and a pointer to the SAP structure. This message is queued at the DLPI lower read queue so that dlpilrsrv will handle it. It then goes to sleep. When dlpilrsrv receives this message, it is assured that all messages before it have been sent upstream, i.e., there are no in-transit packets. dlpilrsrv signals dlpiclose to close the SAP. erg712282/fz526486 o The Open Secure Shell (openssh) package, version 3.8.1p1, contains these fixes: 5. OpenSSH has been updated from version 3.7.1p2 to 3.8.1p1 and support for PAM has been enabled. Please see the openssh website for the list of changes. http://www.openssh.com fz528611 6. SECURITY: OpenSSH only gives significance to the first 8 characters of a password. erg712648/fz529827 SCOSA-2005.19 o The OpenSSL - Secure Sockets Layer / TLS Cryptography Toolkit (openssl) package, version 0.9.7d, contains this fix: 7. SECURITY: OpenSSL has been updated from version 0.9.7c to 0.9.7d to fix several security issues with the earlier version. Please see the openssl website for the list of changes. http://www.openssl.org erg712602/fz529411 SCOS-2005.7 o The OpenSSL Documentation (openssld) package, version 0.9.7d, provides the updated documentation for the openssl package version 0.9.7d. o The SMB based file/printer sharing (samba) package, version 3.0.4, contains these fixes: 8. Samba has been updated from version 3.0.0 to 3.0.4 to enable PAM and to provide multibyte support. Please see the samba website for the list of changes. http://www.samba.org/samba fz529665 9. Swat server status page shows smbd "not running" even when it is. fz528969 o The OUDK Optimizing C Compilation System (uccs) package, version 8.0.2a, contains these fixes: 10. With the introduction of NSS, SCO has changed some existing APIs and added some new APIs to support NSS. Customers building binaries that use these APIs will find that their compile will fail with undefined symbol references similar to the following: Undefined first referenced symbol in file getspnam_r libperl.so getpwent_r libperl.so getgrent_r libperl.so Note: This problem is only seen in systems upgraded from earlier UnixWare releases to UnixWare 7.1.4. 11. C compiler bug fixed. In -Xt mode, the compiler may incorrectly attempt to combine two typedef's that are not numeric types. erg712635/fz529721 12. Make command bug fixed. $(XD:str=rep) broken, where X is any of the @*<%? special characters. erg712665/fz529930 o The X11R6 X Server (xserver) package, version 8.0.2a, contains this fix: 13. SECURITY: Some files and directories were created incorrectly allowing write permission to arbitrary users. Some system daemons were running with a file creation mask (umask) set to 0. fz528862 o The Additional Modules for Perl (modjk1) package, version 2.0.4, contains this fix: 14. Provides the modjk connector for Apache 1 and Tomcat. Apache 2 users do not need this package. Notes: o This package is not installed by default. o This package will not conflict with modjk for Apache 2 & Tomcat as the library is installed in a different location. fz529629 B. Problems Fixed in Maintenance Pack 2: ---------------------------------------- The UnixWare 7.1.4 Maintenance Pack 2 set (uw714mp2) contains the following fixes. o uw714m2 package fixes: Feature and usability enhancements: 1. Updated Laptop PC Card support to include CardBus support. fz529602 2. Updated /sbin/p6update to support new Intel Prescott and Nacona processors. Includes additional microcode updpates. fz530177 3. Enhanced /etc/hw command to decode Pentium 4 cache size information and system memory sizes in excess of 4Gb. fz525623 fz528909 4. Added lsof command version 4.73. Lsof is a UNIX-specific tool. Its name stands for LiSt Open Files, and it does just that. It lists information about files that are open by the processes running on a UNIX system. The lsof provided is compiled with the following flags: -DINKERNEL -Kthread -Kalloca -O2 See the complete copyright notice at the end of this file. fz530110 5. Increased the number of users from 1 to 2 for the default Business Edition license. fz530379 6. Added the Japanese Gaigi character definitions to Japanese locales. erg712726/fz530392 7. For X11R6 applications, allow the NumLock key to be used with Motif accelerator and mnemonic keys for pulldown menus. To enable this feature, set the environment variable "XMNUMLOCK=ALL" for the process. erg712703/fz530229 8. For X11R5 applications, allow both the NumLock key and the CapsLock key to be used with Motif accelerator and mnemonic keys for pulldown menus. It also allows the keypad to be used for text widgets along with the NumLock key. To enable this feature, set the environment variable "XMNUMLOCK=ALL" for the process. erg712781/fz530229 Security improvements: 9. SECURITY: A new file system tunable, CHROOT_SECURITY is provided to protect against a known exploit for escaping from a chroot prison. The new tunable is described in /etc/conf/dtune.d/fs and defined in /etc/conf/mtune.d/fs. Protection is provided by the default value of 1 but traditional behavior may be obtained by resetting CHROOT_SECURITY to 0. erg712509/fz528555 SCOSA-2005.2 10. SECURITY: ICMP error messages are discarded for TCP connections if TCP sequence number in ICMP payroll is not in the range of the data already send but not yet acknowledged. erg712758/fz530661 11. SECURITY: Fixed the Common Desktop Environment dtlogin XDMCP Parser Remote Double Free vulnerability. erg712592/fz529303 SCOSA-2005.18 12. SECURITY: Fixed the following Denial of Service vulnerability. When the NFS mountd service is run by inetd and an NFS mount related request is received from a remote (or local) host, inetd will repeatedly create the mountd process and as a result increasingly consume memory. This problem also exists for the following inetd services: ypupdated, rusersd, sprayd, and walld. To fix this, the mountd service is updated from a "dgram" service to a "tli" service. The socket_type (in /etc/inet.d/inetd.conf) is also changed from "dgram" to "tli" for the following inetd services: mountd, ypupdated, rusersd, sprayd, and walld. erg712731/fz530479 SCOSA-2005.1 13. SECURITY: An upgrade to the KAME implementation of internet key exchange (IKE) daemon implementation which includes several security fixes. erg712650/fz529836 SCOSA-2005.10 Reliability improvements: 14. Fixed kernel panic caused by Merge trying to save FPU state when FPU hasn't been used. fz529860 15. Fixed various bugs in fork that in turn could lead to panics in priocntl. The fixes had to do with ensuring that per-lwp properties were inherited consistently across a fork. fz529463 16. Fixed kernel panic that can sometimes occur due to race condition between fdetach of a named pipe and the last close on the pipe's file descriptors. erg711929/fz519727 17. Fixed kernel panic and kernel memory corruptions caused by an erroneous pointer left in a STREAMS lower multiplexor queue structure during execution of an I_LINK or I_PLINK ioctl. erg712470/fz528449 18. Fixed deadlock that can occur if an NMI occurs on one CPU at the same time that another CPU takes a clock interrupt and attempts to recalibrate the clock. erg712722/fz530382 Networking improvements: 19. Fixed bugs in the scoadmin dhcp and address allocation managers that cause tcl failures and hangs. fz526860 fz528398 fz528404 fz528650 fz529146 fz529522 20. For /dev/tcp, /dev/udp and other related device nodes, permission is given to root to change access and modification times, and to change mode, uid and gid if they are different from the current ones. erg712672/fx528399 21. Fixed IP packet filtering. erg712619/fz529605 22. Fixed race between tcp input processing and tcp close processing. erg712585/fz529161 23. The netstat -I command displays output incorrectly, if the machine gets a lot of packets in a particular interval. erg712663/fz529916 24. System gets many "Out of stream" messages in osmlog and panics afterwards. erg712707/fz530251 25. SNMP time ticks are being interpreted as signed 32-bit integers instead of unsigned 32-bit integers erg712732/fz530366 26. An errant assumption about the maximum size of tcp/ip header including the MAC header and the STREAM headers would not exceed 256 bytes caused the system to write past the allocated space. The allocation optimization now properly accounts for the MAC header if it does not exceed the 256 byte KMA pool size. fz530654 27. There was a namespace conflict within the definition of inet_ntoa. The kernel version is renamed to inet_ntoa_r. This helps to ease porting of open source applications to UnixWare. fz529706 28. Changes to ip_var.h to allow porting of open source applications without requiring the inclusion of some UnixWare-specific headers. fz529708 29. Moved _tcpconn and tcp_dbg_hdr data structures and associated defines from tcp.h to tcp_var.h to allow porting of open source applications without requiring the inclusion of some UnixWare-specific headers. fz530909 USB improvements: 30. Certain USB keyboards exhibit a jitter that is usually seen as the repetition of a previous character. erg712294/fz527741 31. Fixed a potential problem with newer EHCI USB controllers that are controlled by the system BIOS. The visible symptom is that devices attached to the EHCI ports of certain systems won't work. fz530306 32. Low and full speed USB devices attached directly (i.e. not via a USB 2.0 hub) to an EHCI controller will get a message logged to the console 'Device reset timeout during enumeration!' when they are discovered. The message is benign; the devices work as expected. This fix eliminates the cause of the distracting message. fz530377 33. Fixed bug in UDI bridge mapper that caused shared PCI interrupts to remain un-acknowledged during USB host controller initialization leading to system hangs. erg712677/fz530090 erg712699/fz530174 34. Attempting to autoconfigure a USB mouse via the mouseadmin command did not work properly, and the mouse test would always fail. This problem would only be encountered by those adding or switching to a USB mouse, post ISL, and attempting to autoconfigure it through mouseadmin. fz530587 Motif library and X improvements:: 35. Fixed a bug where the change of background of the Motif Scale widget with XtSetValues has no effect if the widget was not realized yet. erg712682/fz530146 36. Fixed the XmATTACH_OPPOSITE_FORM attachment in the children of a Form widget using the incorrect sign of the value, which causes the form to resize itself to become smaller and smaller. erg712697/fz530166 37. Fixed the display of the Japanese messages in programs based on the Athena widgets. Note: Portions of this fix are contained in the xserver, xclients, and xcontrib packages. These packages must be installed or the commands will stop working in Japanese! erg712661/fz529890 Misc improvements: 38. Changes to acpi and mps drivers to recognize pci devices that were previously not found. Includes an upgrade to the latest version of the acpi driver. fz530205 erg712706/fz530250 39. Online and offline of processors may work incorrectly on systems where the processors report more than one logical processor per physical package when hyperthreading is disabled in the system BIOS. fz530165 40. Fixed problems caused by the Intel ICH3-S chipset occasionally returning bad real-time clock values. Symptom was that some platforms may hang on boot with warning messages from psm_time_spin_adjust. erg712593/fz529317 41. Various "off by one" errors fixed in the interval timer code. erg712667/fz529962 42. Disksetup's default blocksize does not work with large VxFS file systems. erg712615/fz529483 43. Fixed the reserve bitmap buffer setup to wrong channel/snode during VxFS snapshot creation, which caused snapshots to be disabled due to read i/o failures on good drives. erg712644/fz529774 44. init failing to change runlevels. There was a race condition in the waitproc function in the init code that has been fixed. erg712313/fz527890 45. System hangs on boot - idmknodd last process run. There was a race condition in the waitproc function in the init code that has been fixed. erg712607/fz529426 46. Fields incorrectly labeled in rtpm utility in Japanese locale. fz530091 47. The auditrpt -f command is causing segmentation faults on some audit report data files. erg712760/fz530410 48. The ap command is causing segmentation fault. Note: Portion of this fix is in the libc package. erg712675/fz530046 49. The creatiadb command is not working. erg712678/fz530093 50. The ps command will now report NI values as set by nice(2), rather than always displaying a 0 in that output column. This is only a compatibility measure and does not imply that the value set by nice(2) will affect scheduling behavior. fz530118 51. Printer manager GUI hangs while adding local printers on a freshly installed system. fz530092 52. C++ template instantiation fails when object file has non-.o suffix To fix this, .ti and .ii suffixes now append to, rather than replace, non-.o object suffixes. fz530247 53. A function call argument that is an expression with "side effects", cannot be used directly more than once when doing function inlining. A C++ "? :" expression, in which the third operand (conditionally evaluated) created a short-lived temp class object, was incorrectly replicated when replacing a multiply-referenced parameter in an inlined function. fz530178 54. For NIS systems, correct lookup-by-GID failure. Note: Portion of this fix is in the libc package. fz530952 55. We now have libcrypto.so from openssl package also and it defines _des_crypt() which is also defined by libcrypt.so. Updated libcrypt.so to use its own definition so that things remain sane. fz530438 56. Updated the /usr/lib/apache/conf/httpd.conf file if apache-1.3.29 and php-4.3.5 are installed, or the /opt/apache2/conf/conf.d/php4.conf file if apache2-2.0.49 and php4-4.3.5 are installed, with: AddType application/x-httpd-php .php .php3 .inc .phtml AddType application/x-httpd-php-source .phps In future, installation of php or php4 should update these files. fz529730 57. Fixed Tomcat 4.1.30 start script to implement a nohup. In future, this will be fixed in the tomcat package. fz530103 58. Fixed the Perl 5.8.3 configuration files to remove build pathnames. In future, this will be fixed in the perl package. fz530344 59. Fixed a syntax error in Mozilla start script. In future, this will be fixed in the mozilla package. fz530539 o Runtime C Library (libc) version 8.0.2b fixes: Note: All fixes in the libc package are also included in the uccs package. 60. Fixed a memory leak in tzset(). erg712729/fz530421 61. The ap command is causing segmentation fault. erg712675/fz530046 62. PAM enabled services do not update syslog correctly. fz530185 fz529908 63. For NIS systems, correct lookup-by-GID failure. fz530952 Additional bug fixes and enhancements are provided with the following packages that are distributed with UnixWare 7.1.4 Maintenance Pack 2. o The Common Unix Printing System (cups) package, version 1.1.19-03: 1. SECURITY: Fixed a Denial of Service vulnerability. It was possible to disable browsing in CUPS by sending an empty UDP datagram to port 631 where cupsd is running. erg712688/fz530153 SCOSA-2004.15 o The Foomatic Filters and PPDs (foomatic) package, version 3.0.2: 2. SECURITY: Foomatic has been updated from version 3.0.0-02 to 3.0.2 to fix a security problem. Please see the foomatic website for the list of changes. http://www.linuxprinting.org/foomatic.html erg712704/fz530505 SCOSA-2005.12 o The HP Inkjet Printer Driver (hpijs) package, version 1.5-02: 3. Updated and new PPD files for non-HP printers from the foomatic-3.0.2 distribution. erg712704/fz530505 o The Lightweight Directory Access Protocol services (ldap) package, version 8.0.1a: 4. LDAP fails to start with the following error message: dynamic linker: /usr/lib/ldap/slapd: relocation error symbol not found: ldapdebug_level referenced from /usr/lib/ldap/slapd erg712679/fz527615 o The Runtime OpenServer library (libosr) package, version 8.0.2a: 5. Binaries generated under UDK OSR5.0.5 core dump when running under UnixWare + OKP. erg712664/fz529933 o The PNG (Portable Network Graphics) Library (libpng) package, version 1.2.7: 6. SECURITY: Libpng has been updated from version 1.2.5 to 1.2.7 to fix several security problems. Please see the libpng website for the list of changes. http://www.libpng.org/pub/png/libpng.html erg712684/fz530149 SCOSA-2004.16 o The Network Drivers (nd) package, version 8.0.2b: 7. Updated Intel PRO/100 (eeE8) Network Driver to version 2.9.1. fz530765 8. Updated Intel PRO/1000 (e1008g) Network Driver to version 7.4.9. fz530764 9. Updated Broadcom Gigabit (bcme) Network Driver to version 7.5.22. fz530259 10. The following NIC drivers have been updated to include PC Card support: d21x, e3E and nat. fz529602 11. The following new adapters are now supported including CardBus NICs and selected PRISM II Wireless PC Card NICs: 3Com EtherLink III 3C589C 0101058906 3Com EtherLink III 3C589D 0101058906 3Com 10Mbps LAN PC Card 3CCE589EC 3Com 10Mbps LAN PC Card 3CXE589DT 3Com 10Mbps LAN PC Card 3CCE589ET 3Com 10/100 LAN PC Card 3C3FE574BT Intel PRO/100 CardBus II MBLA3300 Intel PRO/100 S Mobile Adapter MBLA3300 C3 Intel PRO/100 CardBus II MBLA3400 Linksys Combo PCMCIA EthernetCard EC2T Linksys EtherFast 10/100 PC Card PCMPC100 Linksys EtherFast 10/100 CardBus Card PCMPC200 Linksys Wireless-B Notebook Adapter (802.11b) Netgear 10/100 PCMCIA FA410 Netgear 10/100 PCMCIA Mobile Adapter FA411 Netgear 10/100 CardBus FA510 Netgear 802.11b Wireless PC Card MA401 Socket Communications EA Socket Communications LP-E o The Network Infrastructure and Configuration Subsystem (nics) package, version 8.0.2b: 12. System panics under heavy load in dlpi_hwfail_handler. There was race condition in txmon handler. erg712681/fz530124 o The Open Secure Shell (openssh) package, version 3.9p1-01: 13. OpenSSH has been updated from version 3.8.1p1 to 3.9p1. Please see the openssh website for the list of changes. http://www.openssh.com 14. When sshd is stopped and restarted, it no longer works. The user trying to get in gets the following message: Read from socket failed: Resource temporarily unavailable fz529865 15. Host based authentication does not work with openssh. fz530102 16. Cannot login to an account with an expired password with openssh. fz530287 o The Samba (samba) package, version 3.0.10: 17. SECURITY: Samba has been updated from version 3.0.4 to 3.0.10 to fix several security problems. Please see the samba website for the list of changes. http://www.samba.org/samba erg712735/fz530486 SCOSA-2004.15 erg712754/fz530644 o The Squid Caching Proxy Server (squid) package, version 2.5.STABLE7: 18. SECURITY: Squid has been updated from version 2.4.STABLE7 to 2.5.STABLE7 to fix several security problems. Please see the squid website for the list of changes. http://www.squid-cache.org erg712610/fz529457 SCOSA-2005.16 erg712740/fz530514 o The OUDK Optimizing C Compilation System (uccs) package, version 8.0.2b: 19. SECURITY: Fixed a security problem in the cscope command that allows a local user to compromise filesystem. erg712738/fz530500 20. When doing optimization on functions with exceptionally large code blocks where the total number of arguments passed to calls in a single block exceeds 8000, the C or C++ compiler may generate incorrect memory addresses for local variables. This problem has only occurred in atypical 4GL generated source code. erg712757/fz530656 21. Invalid #define of setterm() macro in curses.h. fz530412 22. When alloca() is used as an argument to another function call, the stack of the current frame may be corrupted such that invalid (saved) register values may be returned to the callee. fz527215 fz531008 o The General Purpose Data Compression Library (zlib) package, version 1.2.1-01: 23. SECURITY: Fixed a Denial of Service vulnerability. Fixed error handling in the inflate implementation to avoid incorrectly continuing to process in error state. erg712692/fz530158 SCOSA-2004.17 o The X11R6 Base X Runtime System (basex) package, version 8.0.2a: 24. SECURITY: Fail-soft mechanism is implemented for handling cases where the permissions and/or owner of the /tmp/.X11-unix, /tmp/.ICE-unix, and /tmp/.font-unix directories are not correctly set. Fail-soft means, if the permission and/or owner is improperly set, the component would try to properly set it. If it is unable to do that, it would generate error/warning message(s), but the component would not fail. Note: Portions of this fix are contained in the xserver package. erg712694/fz530161 SCOSA-2005.8 25. Fixed XtAppAddInput() function. Added missing brackets around XPOLL_READ, XPOLL_WRITE, XPOLL_EXCEPT erg712671/fz529974 o The X11R6 X Server (xserver) package, version 8.0.2b: 26. Invoking "scoadmin video" on an Intel SE7520JR2 white box server to adjust graphics resolution in either character or graphics mode causes the system console to start blinking, and there is no recovery other than rebooting. erg712755/fz530648 o The X11R6 Contributed X Clients (xcontrib) package, version 8.0.2a: 27. Fixed warning message from the xtetris command. fz530182 28. The puzzle command is causing segmentation fault. erg712700/fz530183 29. The ar command displays incorrect message in Japanese environment. erg712640/fz529737 o The X11R6 Graphics Drivers (xdrivers) package, version 8.0.2a: 30. Added the Matrox G550 Video Adapter support to the mtx driver. fz530771 o The IP Filter (ipf) package, version 4.1.3: 31. IP Filter 4.1.3 is an advanced open source filtering package which provides both firewall and network address translation services. It is the most common filtering package supported across different flavors of UNIX. For a complete list of features and services provided, please check the following URLs. o http://coombs.anu.edu.au/~avalon o http://www.obfuscation.org/ipf/ipf-howto.txt fz530132 ------------------------------------------------------------------------ VI. List of Known Issues. 1. After installing the updated nd package, you may see the following warning message on every boot: WARNING: eeE8: eeE8ValidateChecksum: EEPROM checksum validation failed (slot5,port1) This warning comes from the eeE8 driver version 2.9.1 for the following NIC: Vendor ID 0x8086 (INTEL) Device ID 0x1229 Subsystem Vendor ID 0x8086 Subsystem ID 0x9 This message can be safely ignored. 2. Due to changes in the PC Card subsystem, if you have a NIC configured in your laptop prior to installing this maintenance pack, you must run the Network Configuration Manager (netcfg) to remove and then add the NIC to allow it to function again. 3. Before you can configure a PC Card NIC in your laptop, the pcic driver must be configured using the following steps: - Power down the laptop. - Insert your PC Card NIC into a slot. For Toshiba laptops, make sure the BIOS has: Controller Mode = Cardbus/16-bit. - Power on the system. - Log in as root - Run the Device Configuration Utility: 'dcu'. - Select 'Software Device Drivers'. - Select 'Miscellaneous'. - Page down to the 'pcic' driver. If the pcic driver is already marked by an '*', then the driver is already configured. Exit the dcu without saving your changes. - Otherwise, select the 'pcic' driver using the space bar. - Press F5 (New). - Set the following values: Unit: 0 IPL: 0 ITYPE: 0 IRQ: 0 IOStart: 0 IOEnd: 0 MemStart: This field is automatically set by the pcic driver. Don't change this setting. MemEnd: This field is automatically set by the pcic driver. Don't change this setting. DMA: -1 BindCPU: Leave this field blank. - Press F10 (Apply and Return). - Press Enter (Return). - Select 'Return to DCU Main Menu'. - Select 'Apply Changes and Exit DCU'. - At the root prompt type: rm /etc/conf/pack.d/pcic/_drv.o /etc/conf/bin/idbuild -B init 6 - When the system is booting up, verify a PC Card is detected following the copyright screen. For example, EG: Intel Pro/100 Cardbus PC Card detected in socket 0 - Run the Network Configuration Manager 'netcfg' to configure your NIC. - init 6 ------------------------------------------------------------------------ VII. File Contents List of files installed/updated by the uw714m2 package: /etc/conf/drvmap.d/pcic /etc/conf/drvmap.d/udi /etc/conf/drvmap.d/udiMbrdg /etc/conf/drvmap.d/udiMkb /etc/conf/drvmap.d/usb_ehci /etc/conf/drvmap.d/usbd /etc/conf/dtune.d/fs /etc/conf/interface.d/hpci.1.2 /etc/conf/interface.d/mki.3 /etc/conf/interface.d/psm.2.2 /etc/conf/mdevice.d/pcic /etc/conf/mdevice.d/psm_apic /etc/conf/mdevice.d/psm_mc146818 /etc/conf/mdevice.d/udi /etc/conf/mdevice.d/udiMbrdg /etc/conf/mdevice.d/udiMkb /etc/conf/mdevice.d/usb_ehci /etc/conf/mdevice.d/usbd /etc/conf/mtune.d/fs /etc/conf/pack.d/acpi/Driver_atup.o /etc/conf/pack.d/acpi/Driver_mp.o /etc/conf/pack.d/confmgr/Driver_atup.o /etc/conf/pack.d/confmgr/Driver_mp.o /etc/conf/pack.d/fc/Driver_atup.o /etc/conf/pack.d/fc/Driver_mp.o /etc/conf/pack.d/fp/Driver_atup.o /etc/conf/pack.d/fp/Driver_mp.o /etc/conf/pack.d/fs/Driver_atup.o /etc/conf/pack.d/fs/Driver_mp.o /etc/conf/pack.d/fs/space.c /etc/conf/pack.d/hpci/Driver_atup.o /etc/conf/pack.d/hpci/Driver_mp.o /etc/conf/pack.d/inet/Driver_atup.o /etc/conf/pack.d/inet/Driver_mp.o /etc/conf/pack.d/inet/space.c /etc/conf/pack.d/io/Driver_atup.o /etc/conf/pack.d/io/Driver_mp.o /etc/conf/pack.d/kma/Driver_atup.o /etc/conf/pack.d/kma/Driver_mp.o /etc/conf/pack.d/kma/space.c /etc/conf/pack.d/mem/Driver_atup.o /etc/conf/pack.d/mem/Driver_mp.o /etc/conf/pack.d/mps/Driver_mp.o /etc/conf/pack.d/namefs/Driver_atup.o /etc/conf/pack.d/namefs/Driver_mp.o /etc/conf/pack.d/nb/Driver_atup.o /etc/conf/pack.d/nb/Driver_mp.o /etc/conf/pack.d/nbclts/Driver_atup.o /etc/conf/pack.d/nbclts/Driver_mp.o /etc/conf/pack.d/nbcots/Driver_atup.o /etc/conf/pack.d/nbcots/Driver_mp.o /etc/conf/pack.d/net/Driver_atup.o /etc/conf/pack.d/net/Driver_mp.o /etc/conf/pack.d/pccard/Driver_atup.o /etc/conf/pack.d/pccard/Driver_mp.o /etc/conf/pack.d/pccard/stubs.c /etc/conf/pack.d/pci/Driver_atup.o /etc/conf/pack.d/pci/Driver_mp.o /etc/conf/pack.d/pcic/Driver.o /etc/conf/pack.d/pcic/space.c /etc/conf/pack.d/pcic/stubs.c /etc/conf/pack.d/proc/Driver_atup.o /etc/conf/pack.d/proc/Driver_mp.o /etc/conf/pack.d/procfs/Driver_atup.o /etc/conf/pack.d/procfs/Driver_mp.o /etc/conf/pack.d/psm_apic/Driver_mp.o /etc/conf/pack.d/psm_mc146818/Driver.o /etc/conf/pack.d/ptem/Driver_atup.o /etc/conf/pack.d/ptem/Driver_mp.o /etc/conf/pack.d/resmgr/Driver_atup.o /etc/conf/pack.d/resmgr/Driver_mp.o /etc/conf/pack.d/sockfs/Driver_atup.o /etc/conf/pack.d/sockfs/Driver_mp.o /etc/conf/pack.d/svc/Driver_atup.o /etc/conf/pack.d/svc/Driver_mp.o /etc/conf/pack.d/sysclass/Driver_atup.o /etc/conf/pack.d/sysclass/Driver_mp.o /etc/conf/pack.d/ticlts/Driver_atup.o /etc/conf/pack.d/ticlts/Driver_mp.o /etc/conf/pack.d/ts/Driver_atup.o /etc/conf/pack.d/ts/Driver_mp.o /etc/conf/pack.d/udi/Driver.o /etc/conf/pack.d/udiMbrdg/Driver.o /etc/conf/pack.d/udiMkb/Driver.o /etc/conf/pack.d/usb_ehci/Driver.o /etc/conf/pack.d/usbd/Driver.o /etc/conf/pack.d/util/Driver_atup.o /etc/conf/pack.d/util/Driver_mp.o /etc/conf/pack.d/vxfs/Driver_atup.o /etc/conf/pack.d/vxfs/Driver_mp.o /etc/conf/sdevice.d/pcic /etc/conf/sdevice.d/udi /etc/conf/sdevice.d/udiMbrdg /etc/conf/sdevice.d/udiMkb /etc/conf/sdevice.d/usb_ehci /etc/conf/sdevice.d/usbd /etc/crash /etc/dcopy /etc/dinit.d/S80lp /etc/docview /etc/eels/src/eelsdba/Makefile-scox /etc/eels/src/eelsdba/README /etc/eels/src/eelsdba/eelsdba_mysql_scox.c /etc/eels/src/eelsdba/initdb.mysql-scox /etc/ff /etc/fsck /etc/hw /etc/imapd /etc/inet/inetd.conf /etc/init.d/eelsrc /etc/init.d/license /etc/init.d/lp /etc/init.d/snmp /etc/init.d/z35SysInfo /etc/mail/slocal /etc/mkfs /etc/mount /etc/ncheck /etc/p6updata /etc/pam.d/dtlogin /etc/pam.d/dtsession /etc/pam.d/ftp /etc/pam.d/login /etc/pam.d/mail /etc/pam.d/passwd /etc/pam.d/rexec /etc/pam.d/rlogin /etc/pam.d/rsh /etc/pam.d/su /etc/pam.d/telnet /etc/pf.d/IP/.saps /etc/popper /etc/rc0.d/K20lp /etc/rc0.d/K70eels /etc/rc1.d/K20lp /etc/rc1.d/K67snmp /etc/rc1.d/R10license /etc/rc1.d/S70eels /etc/rc2.d/S70eels /etc/rc2.d/S73snmp /etc/rc2.d/S95docview /etc/scsi/pdi_hot /etc/scsi/pdimkdev /etc/scsi/pdimkdtab /etc/scsi/sdighost /etc/scsi/sdipath /etc/security/audit/auditrpt/auditrptv4 /etc/volcopy /sbin/devnm /sbin/df /sbin/fsck /sbin/fsdb /sbin/init /sbin/mkfs /sbin/mount /sbin/p6update /sbin/putdev /sbin/sdimkdev /sbin/sdipath /sbin/su /usr/X/lib/WXm/libXm.so.1.3 /usr/X/lib/X11/locale/ja/app-defaults/Bitmap /usr/X/lib/X11/locale/ja/app-defaults/Chooser /usr/X/lib/X11/locale/ja/app-defaults/Editres /usr/X/lib/X11/locale/ja/app-defaults/Spider /usr/X/lib/X11/locale/ja/app-defaults/Viewres /usr/X/lib/X11/locale/ja/app-defaults/XClipboard /usr/X/lib/X11/locale/ja/app-defaults/XFontSel /usr/X/lib/X11/locale/ja/app-defaults/XLock /usr/X/lib/X11/locale/ja/app-defaults/Xedit /usr/X/lib/X11/locale/ja/app-defaults/Xfd /usr/X/lib/X11/locale/ja/app-defaults/Xman /usr/X/lib/dtruntime.so.1 /usr/X/lib/libXm.a /usr/X/lib/libXm.so.1.3 /usr/bin/compress /usr/bin/ddbconv /usr/bin/devattr /usr/bin/devfree /usr/bin/devreserv /usr/bin/df /usr/bin/getdev /usr/bin/getdgrp /usr/bin/getvol /usr/bin/login /usr/bin/lsof /usr/bin/mailcheck /usr/bin/mailx /usr/bin/mouseadmin /usr/bin/netstat /usr/bin/passwd /usr/bin/pkginfo /usr/bin/pkglist /usr/bin/pkgmk /usr/bin/pkgparam /usr/bin/pkgtrans /usr/bin/putdev /usr/bin/su /usr/bin/uncompress /usr/bin/zcat /usr/ccs/bin/CC /usr/ccs/lib/c++be /usr/ccs/lib/prelink /usr/dt/bin/dtfile /usr/dt/bin/dtgreet /usr/dt/bin/dtlogin /usr/dt/bin/dtsession /usr/dt/lib/libDtLogin.so /usr/dt/lib/libDtLogin.so.1 /usr/dt/lib/libpam.so.1 /usr/include/net/radix.h /usr/include/netinet/in.h /usr/include/netinet/in_mp.h /usr/include/netinet/in_pcb.h /usr/include/netinet/ip_var.h /usr/include/netinet/tcp.h /usr/include/netinet/tcp_var.h /usr/include/netmgt/snmp.h /usr/include/sys/class.h /usr/include/sys/disp.h /usr/include/sys/insrem.h /usr/include/sys/kmem.h /usr/include/sys/lcis.h /usr/include/sys/lclient.h /usr/include/sys/lcs.h /usr/include/sys/lss.h /usr/include/sys/lwp.h /usr/include/sys/queue.h /usr/include/sys/socket.h /usr/include/sys/stream.h /usr/include/sys/strsubr.h /usr/include/sys/vfs.h /usr/lib/.ns.so /usr/lib/crash/libkcrash.so /usr/lib/crash/macros/buf.k /usr/lib/crash/macros/e1008g.k /usr/lib/crash/macros/eeE8.k /usr/lib/crash/macros/file.k /usr/lib/crash/macros/info.k /usr/lib/crash/macros/inode.k /usr/lib/crash/macros/ipc.k /usr/lib/crash/macros/loadmacs /usr/lib/crash/macros/net.k /usr/lib/crash/macros/page.k /usr/lib/crash/macros/pm.k /usr/lib/crash/macros/proc.k /usr/lib/crash/macros/sertty.k /usr/lib/crash/macros/stack.k /usr/lib/crash/macros/stat.k /usr/lib/crash/macros/stream.k /usr/lib/crash/macros/trace.k /usr/lib/crash/macros/ufs.k /usr/lib/crash/macros/vm.k /usr/lib/crash/macros/vnode.k /usr/lib/crash/macros/vxfs.k /usr/lib/iaf/in.login/scheme /usr/lib/iaf/login/scheme /usr/lib/libXm.so.1.3 /usr/lib/libadm.a /usr/lib/libcrypt.so /usr/lib/libcrypt.so.1 /usr/lib/libnsl.so /usr/lib/libnsl.so.1 /usr/lib/libsmux.so /usr/lib/libsnmp.so /usr/lib/libsnmpio.so /usr/lib/libxti.so /usr/lib/locale/ja/LC_CTYPE /usr/lib/locale/ja/LC_MESSAGES/RTPM /usr/lib/locale/ja/LC_MESSAGES/uxar /usr/lib/nfs/mountd /usr/lib/scoadmin/aas/aasGUI /usr/lib/scoadmin/dhcp/dhcpGUI /usr/lib/scoadmin/filesystem/filesystemOsa /usr/lib/scoadmin/netosa/aasOsa /usr/lib/scoadmin/printer/printerGUI /usr/sadm/install/bin/pkginstall /usr/sadm/install/bin/pkgremove /usr/sadm/sysadm/bin/mkdtab /usr/sbin/ap /usr/sbin/crash /usr/sbin/creatiadb /usr/sbin/cs /usr/sbin/dcopy /usr/sbin/df /usr/sbin/disksetup /usr/sbin/edquota /usr/sbin/fdisk /usr/sbin/ff /usr/sbin/fsck /usr/sbin/hostmibd /usr/sbin/in.ftpd /usr/sbin/in.inetinst /usr/sbin/in.rexecd /usr/sbin/in.rshd /usr/sbin/in.snmpd /usr/sbin/installf /usr/sbin/labelit /usr/sbin/mkfs /usr/sbin/mount /usr/sbin/ncheck /usr/sbin/partsize /usr/sbin/pkgadd /usr/sbin/pkgask /usr/sbin/pkgcat /usr/sbin/pkgchk /usr/sbin/pkgcopy /usr/sbin/pkginstall /usr/sbin/pkgrm /usr/sbin/prtconf /usr/sbin/quot /usr/sbin/quota /usr/sbin/quotacheck /usr/sbin/quotaoff /usr/sbin/quotaon /usr/sbin/racoon /usr/sbin/removef /usr/sbin/repquota /usr/sbin/sco_pmd /usr/sbin/switchout /usr/sbin/volcopy /var/spool/mqueue ------------------------------------------------------------------------ VIII. Escalation Fixes in this Maintenance Pack These are the Escalation tracking numbers for the fixes included in UnixWare 7.1.4 Maintenance Pack 1. These fixes are also included in UnixWare 7.1.4 Maintenance Pack 2. erg711929/fz529721 erg712596/fz529361 erg712598/fz529384 erg712605/fz529414 erg712620/fz529611 erg712621/fz529619 erg712635/fz529721 erg712658/fz529884 erg712661/fz529890 erg712672/fz528399 erg712682/fz530146 erg712697/fz530166 ptf9050a/fz529560 ptf9050b/fz529565 fz198541 fz519105 fz528611 fz528775 fz528862 fz529097 fz529463 fz529581 fz529663 fz529698 fz529765 fz529851 fz529860 fz529876 fz529916 erg712282/fz526486 (fix provided in the nics package) erg712602/fz529411 (fix provided in the openssl package) erg712635/fz529721 (fix provided in the uccs package) erg712648/fz529827 (fix provided in the openssh package erg712665/fz529930 (fix provided in the uccs package) erg712700/fz530183 (fix provided in the xcontrib package) erg712757/fz530656 (fix provided in the uccs package) fz529615 (fix provided in the foomatic and hpijs packages) fz529629 (fix provided in the modjk1 package) fz529665 (fix provided in the samba package) fz528862 (fix provided in the xserver package) fz528969 (fix provided in the samba package) fz530182 (fix provided in the xcontrib package) These are the Escalation tracking numbers for the fixes included in UnixWare 7.1.1 Maintenance Pack 2: erg711929/fz519727 erg712294/fz527741 erg712313/fz527890 erg712470/fz528449 erg712509/fz528555 erg712585/fz529161 erg712592/fz529303 erg712593/fz529317 erg712607/fz529426 erg712615/fz529483 erg712619/fz529605 erg712644/fz529774 erg712650/fz529836 erg712661/fz529890 erg712663/fz529916 erg712667/fz529962 erg712672/fx528399 erg712675/fz530046 erg712677/fz530090 erg712678/fz530093 erg712682/fz530146 erg712697/fz530166 erg712699/fz530174 erg712703/fz530229 erg712706/fz530250 erg712707/fz530251 erg712722/fz530382 erg712726/fz530392 erg712731/fz530479 erg712732/fz530366 erg712758/fz530661 erg712760/fz530410 erg712781/fz530229 erg712729/fz530421 (fix provided in the libc package) erg712688/fz530153 (fix provided in the cups package) erg712704/fz530505 (fix provided in the foomatic and hpijs packages) erg712664/fz529933 (fix provided in the libosr package) erg712679/fz527615 (fix provided in the ldap package) erg712684/fz530149 (fix provided in the libpng package) erg712681/fz530124 (fix provided in the nics package) erg712735/fz530486 (fix provided in the samba package) erg712754/fz530644 (fix provided in the samba package) erg712610/fz529457 (fix provided in the squid package) erg712740/fz530514 (fix provided in the squid package) erg712738/fz530500 (fix provided in the uccs package) erg712757/fz530656 (fix provided in the uccs package) erg712692/fz530158 (fix provided in the zlib package) erg712694/fz530161 (fix provided in the basex package) erg712671/fz529974 (fix provided in the basex package) erg712755/fz530648 (fix provided in the xserver package) erg712700/fz530183 (fix provided in the xcontrib package) erg712640/fz529737 (fix provided in the xcontrib package) fz525623 fz526860 fz528398 fz528404 fz528650 fz528909 fz529146 fz529463 fz529522 fz529602 fz529706 fz529708 fz529730 fz529860 fz530091 fz530092 fz530103 fz530110 fz530118 fz530165 fz530177 fz530178 fz530247 fz530306 fz530344 fz530377 fz530379 fz530438 fz530539 fz530587 fz530654 fz530909 fz530952 fz529908 (fix provided in the libc package) fz530185 (fix provided in the libc package) fz530952 (fix provided in the libc package) fz529602 (fix provided in the nd package) fz530259 (fix provided in the nd package) fz530764 (fix provided in the nd package) fz530765 (fix provided in the nd package) fz529865 (fix provided in the openssh package) fz530102 (fix provided in the openssh package) fz530287 (fix provided in the openssh package) fz527215 (fix provided in the uccs package) fz530412 (fix provided in the uccs package) fz531008 (fix provided in the uccs package) fz530182 (fix provided in the xcontrib package) fz530771 (fix provided in the xdrivers package) fz530132 (fix provided in the ipf package) ------------------------------------------------------------------------ IX. Copyrights. 1. The lsof command: /* * Copyright 2002 Purdue Research Foundation, West Lafayette, * Indiana 47907. All rights reserved. * * Written by Victor A. Abell * * This software is not subject to any license of the American * Telephone and Telegraph Company or the Regents of the * University of California. * * Permission is granted to anyone to use this software for * any purpose on any computer system, and to alter it and * redistribute it freely, subject to the following * restrictions: * * 1. Neither the authors nor Purdue University are responsible * for any consequences of the use of this software. * * 2. The origin of this software must not be misrepresented, * either by explicit claim or by omission. Credit to the * authors and Purdue University must appear in documentation * and sources. * * 3. Altered versions must be plainly marked as such, and must * not be misrepresented as being the original software. * * 4. This notice may not be removed or altered. */ ------------------------------------------------------------------------ (c) Copyright 2005 The SCO Group, Inc. All rights reserved.