UnixWare 7.1.4 Maintenance Pack 2
Release Notes
February 2005
Dear SCO Customer,
This CD contains UnixWare 7.1.4 Maintenance Pack 2. This Maintenance Pack
contains important fixes to your UnixWare system and should be applied at
your next maintenance period.
------------------------------------------------------------------------
Contents
I. Software Notes and Recommendations.
II. Installation Instructions.
III. Removal Instructions.
IV. Custom CD Creation Instructions.
V. Comprehensive List of Problems Fixed.
A. Problems Fixed in Maintenance Pack 1.
B. Problems Fixed in Maintenance Pack 2.
VI. List of Known Issues.
VII. File Contents.
VIII. Escalation Fixes in this Maintenance Pack.
IX. Copyrights.
------------------------------------------------------------------------
I. Software Notes and Recommendations.
1. The UnixWare 7.1.4 Maintenance Pack 2 should only be installed on:
UnixWare 7.1.4
2. If you are performing an in place upgrade to UnixWare 7.1.4 from
UnixWare 7.1.1, UnixWare 7.1.2 (Open UNIX 8.0.0), or UnixWare 7.1.3,
you must reboot the system after upgrading and before installing this
maintenance pack.
3. This maintenance pack consists of the following sets and packages:
o uw714mp2 - UnixWare 7.1.4 Maintenance Pack 2 Set
This set contains the following packages:
uw714m2 - UnixWare 7.1.4 Maintenance Pack 2 package
libc - Runtime C Library package, version 8.0.2b
libthread - Runtime Thread Library package, version 8.0.2a
pam - Pluggable Authentication Modules, version 0.77
Please note that the libthread and pam packages have not changed
since they were last updated for Maintenance Pack 1.
o uw7mpdoc - Updated Base System Guides, version 7.1.4a
Please note that this package has not been updated for this
maintenance pack. DocView will hence continue to show the maintenance
pack as UnixWare 7.1.4 Maintenance Pack 1.
o Twenty updated packages:
cups - Common Unix Printing System, version 1.1.19-03
foomatic - Foomatic Filters and PPDs, version 3.0.2
hpijs - HP Inkjet Printer Driver, version 1.5-02
ldap - Lightweight Directory Access Protocol services,
version 8.0.1a
libosr - Runtime OpenServer Libraries, version 8.0.2a
libpng - PNG (Portable Network Graphics) Library, version 1.2.7
nd - Network Drivers, version 8.0.2b
nics - Network Infrastructure and Configuration Subsystem,
version 8.0.2b
openssh - Open Secure Shell, version 3.9p1-01
openssl - Open SSL/TLS Cryptography Toolkit, version 0.9.7d
openssld - OpenSSL Documentation, version 0.9.7d
samba - Samba, version 3.0.10
squid - Squid Caching Proxy Server, version 2.5.STABLE7
uccs - OUDK Optimizing C Compilation System, version 8.0.2b
zlib - General Purpose Data Compression Library,
version 1.2.1-01
basex - X11R6 Base X Runtime System, version 8.0.2a
xserver - X11R6 X Server, version 8.0.2b
xclients - X11R6 X Clients, version 8.0.2a
xcontrib - X11R6 Contributed X Clients, version 8.0.2b
xdrivers - X11R6 Graphics Drivers, version 8.0.2a
Please note that the openssl and openssld packages have not changed
since they were last updated for Maintenance Pack 1.
o Two new optional packages:
ipf - IP Filter, version 4.1.3
modjk1 - Additional Modules for Perl, version 2.0.4
Please note that the modjk1 package has not changed since it was last
provided with Maintenance Pack 1.
4. An install.sh script is provided to simplify installation, as described
in the Installation Instructions section below. Use of this script is
highly recommended.
The install.sh script installs the following:
o The uw714mp2 set.
Installing uw714mp2 will update the libc and libthread runtime
libraries as well as installing the uw714m2 and pam packages. The
runtime libraries, once installed, are not removable.
o The uw7mpdoc package.
o Newer versions of the updated packages listed above, provided earlier
versions of these packages are already installed on your system.
Alternatively, with care you can install the packages individually.
However, you should note the following:
o The uw714mp2 set is required for all systems.
o The following packages are required to be updated, that is you need
to install them if you have an earlier version installed on your
system:
cups, openssh, samba, xcontrib
o The following packages are strongly recommended:
foomatic, libpng, nd, nics, openssl, squid, uccs, zlib, xserver,
xdrivers
o All other packages are optional.
If you did not install some of the above packages when initially
installing UnixWare 7.1.4, you can do so using the install.sh script.
You do not need to first install the original UnixWare 7.1.4 version.
Please refer to the Installation Instructions section below.
5. A mkiso.sh script is provided with this maintenance pack to create
custom maintenance pack ISO image files and/or CDs from the original
maintenance pack ISO image file or CD, as described in the Custom CD
Creation Instructions section below.
Notes:
o To use this feature, you need the cdrtools package installed.
o To burn the custom ISO image file, you also need a writable CD drive
and CD Media.
6. This maintenance pack supersedes and obsoletes:
uw714mp1 - UnixWare 7.1.4 Maintenance Pack 1 Set
ptf9050 - The UnixWare 7.1.4 Licensing Supplement
These packages and sets do not need to be removed prior to installing
uw714mp2.
The installation of uw714mp2 will also lock down these packages and
they will no longer be removable.
7. This maintenance pack contains security enhancements, including
changes to numerous file and directory permissions. To obtain the full
advantage of these enhancements on systems that contain the obsolete
scohelp package, it is recommended that you remove the scohelp package
prior to installing this maintenance pack. The SCOhelp documentation
server has been replaced by DocView since UnixWare 7.1.3. If you have
upgraded from a prior release, you can check for the existence of the
scohelp package on your system with the command:
pkginfo scohelp
To remove the package, type the following command as root:
/etc/scohelphttp stop
Followed by:
pkgrm scohelp
8. If you install a package (say acp) from the UnixWare media kit that has
been updated by the maintenance pack on a system with the maintenance
pack installed, you will see the following warning message:
The <acp> package was installed after installing the <uw714m2> package.
WARNING:
The <uw714m2> package contains updates to the above package(s).
Please reinstall the <uw714m2> package. Failure to do so may leave
your system in an inconsistent state.
This warning message will be displayed after every pkgadd until you
reinstall the uw714m2 package. To do this, mount the maintenance pack
CD and type:
pkgadd -d /mount_point/images/uw714mp2.image uw714m2
Then reboot your system:
shutdown -i6 -g0 -y
9. For a list of issues that this maintenance pack addresses, please see
the Comprehensive List of Problems Fixed section below.
10. For a list of known issues with this maintenance pack, please see the
List of Known Issues section below.
11. If you have questions regarding this supplement, or the product on
which it is installed, please contact your software supplier or support
representative.
------------------------------------------------------------------------
II. Installation Instructions.
1. Log in as root.
2. If you are installing the maintenance pack from CD, insert the
maintenance pack CD into the primary CD drive and type:
mount /dev/cdrom/cdrom1 /install
If you are installing this maintenance pack from the web, download the
uw714mp2.iso file to your server from:
http://www.sco.com/support/update/download/release.php?rid=58
In the directory where you downloaded the uw714mp2.iso file, type:
mount `marry -a uw714mp2.iso` /install
3. Change directory to /install:
cd /install
4. To install the required uw714mp2 set and the updated packages on your
system, type:
./install.sh [-nv]
This will show you a menu screen listing the names of the packages that
are part of this maintenance pack.
By default, uw714mp2, uw7mpdoc, and updated packages whose earlier
versions are already installed on your system are selected for
installation.
The packages whose earlier versions are not installed on your system
are not selected for installation.
The packages whose later versions are installed on your system are
not listed.
Select the packages that you want to install on your system and press
"Apply" to continue. Since the menu screen can only display ten
packages at a time, pressing "Apply" will show the next list of
packages. Pressing "Apply" on the final screen will install the
selected packages.
The optional -n (non-interactive) flag skips the menu screen and
proceeds to install the default selection of packages.
The optional -v (verbose) flag provides more status information during
the installation.
5. To individually install packages and sets, run the following command:
./install.sh [packages]
where packages can be any of the packages listed in section I.
6. After all desired packages are installed, reboot the system by typing:
shutdown -i6 -g0 -y
------------------------------------------------------------------------
III. Removal Instructions.
1. Log in as root.
2. To remove the maintenance pack set (except for its library packages,
which are not removable), type:
pkgrm uw714mp2
Notes:
o Removal of the uw714mp2 set is not recommended.
o The IP Filter (ipf) and Open Secure Shell (openssh) packages are
functionally dependent on the uw714m2 package. These packages will
not work if uw714m2 is removed.
3. To fully restore your system to its prior state, reinstall the
UnixWare 7.1.4 media kit version of the updated packages.
Note: Removal of the updated packages is not recommended.
4. After all the packages are removed, reboot the system by typing:
shutdown -i6 -g0 -y
------------------------------------------------------------------------
IV. Custom CD Creation Instructions.
1. Follow steps 1 to 3 of section II.
2. Type
./mkiso.sh
This will ask you the name of the ISO image file. Default is
/uw714mp2.iso.
This will then show you a menu screen listing the names of the packages
that are part of this maintenance pack.
By default all packages are selected.
Unselect the packages that you want to exclude from your custom CD.
and press "Apply" to continue. Since the menu screen can only display
ten packages at a time, pressing "Apply" will show the next list of
packages. Pressing "Apply" on the final screen will create the CD ISO
image file.
Note: The uw714mp2 package cannot be unselected.
3. To burn the ISO image file, insert the CD media in you CD drive and
type:
cdrecord -v -dao -speed=16 -fs=10m \
-dev=1,0,1 -driveropts=burnfree filename
where
dev should be the SCSI target for the CD drive.
filename should be the name of your custom ISO image file.
Please refer to the cdrecord(1) man page for details.
------------------------------------------------------------------------
V. Comprehensive List of Problems Fixed.
A. Problems Fixed in Maintenance Pack 1:
----------------------------------------
The UnixWare 7.1.4 Maintenance Pack 1 set (uw714mp1) contains the
following fixes. These fixes are also included in UnixWare 7.1.4
Maintenance Pack 2 set (uw714mp2).
o uw714m1 package fixes:
Feature and usability enhancements:
1. The following UnixWare 7.1.4 functionality is now provided:
o Pluggable authentication modules (PAM) support
o Encrypted file system support
These features are described in the online documentation that is
provided with the uw7mpdoc package that accompanies this maintenance
pack. See the "New Features and Notes" section of the online
documentation.
fz528611 fz529097
2. Intel microcode updates.
erg712621/ptf9050/fz529619
3. kcrash macros updates.
fz529663
4. Additional source files for DBA usage with MySQL provided with the
SCOx enablement package. Modified Makefile, eelsdba_mysql.c,
initdb.mysql and README are provided for use with latest MySQL
package.
fz529851
5. Enabled large file support in compress.
fz529876
Security improvements:
6. SECURITY: Some files and directories were created incorrectly
allowing write permission to arbitrary users. Some system daemons
were running with a file creation mask (umask) set to 0.
fz528862
7. SECURITY: Security vulnerability issues in TCP are fixed according
to this IETF draft:
http://www.ietf.org/internet-drafts/draft-ietf-tcpm-tcpsecure-00.txt
erg712598/fz529384
8. SECURITY: Two new inconfig tunables have been introduced to address
the TCP Rose Attack:
o ip_maxfragpackets:
This is the maximum number of fragmented packets that IP will
accept. The default is 800.
o ip_maxfragsperpacket:
This is the maximum number of fragments per packet that IP will
accept. The default is 16.
erg712605/fz529414 SCOSA-2005.14
Reliability improvements:
9. Fixed panic on errant umem_free() in [g|s]etgroups_sco.
fz528775
10. Fixed a memory corruption bug caused by not stopping netbios when
the system was brought to init state 1.
ptf9050b/fz529565
11. Fixed process hangs due to race between exiting children and SIGCLD
processing in the parent.
erg712596/fz529361
Networking improvements:
12. Changed use of types u_[short,int,long] to u[short,int,long]_t in
<netinet/tcp.h> since the former are not always defined.
fz529581
13. The SHUT_RD, SHUT_WR, and SHUT_RDRW macros in <sys/socket.h> are
defined only when at least one XOPEN-ish feature test macro is
defined. This is counter to our "everything visible by default"
model for headers.
The TOG SUS says that SHUT_* macros can be defined in general, so
there's no reason not to define these with no conditional inclusion
coverage.
fz529698
14. Under some circumstances, ppp could go into an infinite loop of read
calls in the libnsl ics_read_data() routine.
erg712620/fz529611
Installation tools improvements:
15. By the time pkgadd executes the preinstall script of a package, it
has already updated the contents file with the information from the
package's pkgmap file. Hence if the preinstall script is terminated
for some reason, the contents file is left in a bad state - the
files are not installed on the system but they are present in the
contents file. This has been fixed so that the contents file is not
updated until the files are installed.
fz519105
16. Fixed a problem where pkginstall, pkgremove and installf can destroy
the software contents file if it is already locked by another
process.
fz198541
Licensing improvements:
17. The license policy daemon ignores custom licenses from earlier
releases. For example, if your system license had previously
included extra users, not separately licensed but included in your
original, those users would be ignored. This has been fixed.
ptf9050a/fz529560
o Runtime C Library (libc) version 8.0.2a fixes:
18. Bad parsing of some special strings in string-to-floating code.
fz529765
o Runtime Thread Library (libthread) version 8.0.2a fixes:
19. Oracle may hang while starting by going into an infinite loop in
libthread's thr_keycreate().
erg712658/fz529884
Additional bug fixes and enhancements were provided with the supplemental
packages that were distributed with UnixWare 7.1.4 Maintenance Pack 1.
These fixes are also included in the supplemental packages provided with
UnixWare 7.1.4 Maintenance Pack 2.
o Documentation:
1. The Updated Base System Guides (uw7mpdoc) package, version
7.1.4a, provides documentation for the PAM, encrypted file system,
modjk1, and Samba features delivered with uw714mp1 and its
supplemental packages.
o PAM:
2. The following supplemental packages have been updated to enable
support for PAM. They can only be installed if the pam package
(contained in uw714mp2 set) is installed:
cups - Common Unix Printing System, version 1.1.19-02
openssh - Open Secure Shell, version 3.8.1p1
samba - SMB based file/printer sharing, version 3.0.4
xcontrib - X11R6 Contributed X Clients, version 8.0.2a
o The Foomatic Filters and PPDs (foomatic) package, version 3.0.0-02,
and the HP Inkjet Printer Driver (hpijs) package, version 1.5-01,
contain this fix:
3. Fixed obscure corruption of a few data files.
fz529615
o The Netdriver Infrastructure and Configuration Subsystem (nics)
package, version 8.0.2a, contains this fix:
4. A time delay of 1 sec in dlpiclose() was causing some applications,
e.g. getmany (accessing mib-2 table) to consume large amounts of CPU
time. This time delay ensured that all in-transit packets were
processed before closing the SAP.
This delay is removed and the code reworked to use message based
synchronization during closedown.
dlpiclose() now constructs a M_CTL packet containing a message of
type dl_ctlmsg_t. This message contains DLPI primitive set as
DL_CLOSESAP and a pointer to the SAP structure.
This message is queued at the DLPI lower read queue so that
dlpilrsrv will handle it. It then goes to sleep. When dlpilrsrv
receives this message, it is assured that all messages before it
have been sent upstream, i.e., there are no in-transit packets.
dlpilrsrv signals dlpiclose to close the SAP.
erg712282/fz526486
o The Open Secure Shell (openssh) package, version 3.8.1p1, contains
these fixes:
5. OpenSSH has been updated from version 3.7.1p2 to 3.8.1p1 and
support for PAM has been enabled.
Please see the openssh website for the list of changes.
http://www.openssh.com
fz528611
6. SECURITY: OpenSSH only gives significance to the first 8
characters of a password.
erg712648/fz529827 SCOSA-2005.19
o The OpenSSL - Secure Sockets Layer / TLS Cryptography Toolkit
(openssl) package, version 0.9.7d, contains this fix:
7. SECURITY: OpenSSL has been updated from version 0.9.7c to 0.9.7d to
fix several security issues with the earlier version.
Please see the openssl website for the list of changes.
http://www.openssl.org
erg712602/fz529411 SCOS-2005.7
o The OpenSSL Documentation (openssld) package, version 0.9.7d, provides
the updated documentation for the openssl package version 0.9.7d.
o The SMB based file/printer sharing (samba) package, version 3.0.4,
contains these fixes:
8. Samba has been updated from version 3.0.0 to 3.0.4 to enable PAM
and to provide multibyte support.
Please see the samba website for the list of changes.
http://www.samba.org/samba
fz529665
9. Swat server status page shows smbd "not running" even when it is.
fz528969
o The OUDK Optimizing C Compilation System (uccs) package, version
8.0.2a, contains these fixes:
10. With the introduction of NSS, SCO has changed some existing APIs
and added some new APIs to support NSS. Customers building binaries
that use these APIs will find that their compile will fail with
undefined symbol references similar to the following:
Undefined first referenced
symbol in file
getspnam_r libperl.so
getpwent_r libperl.so
getgrent_r libperl.so
Note:
This problem is only seen in systems upgraded from earlier UnixWare
releases to UnixWare 7.1.4.
11. C compiler bug fixed. In -Xt mode, the compiler may incorrectly
attempt to combine two typedef's that are not numeric types.
erg712635/fz529721
12. Make command bug fixed. $(XD:str=rep) broken, where X is any of
the @*<%? special characters.
erg712665/fz529930
o The X11R6 X Server (xserver) package, version 8.0.2a, contains this
fix:
13. SECURITY: Some files and directories were created incorrectly
allowing write permission to arbitrary users. Some system daemons
were running with a file creation mask (umask) set to 0.
fz528862
o The Additional Modules for Perl (modjk1) package, version 2.0.4,
contains this fix:
14. Provides the modjk connector for Apache 1 and Tomcat. Apache 2
users do not need this package.
Notes:
o This package is not installed by default.
o This package will not conflict with modjk for Apache 2 & Tomcat as
the library is installed in a different location.
fz529629
B. Problems Fixed in Maintenance Pack 2:
----------------------------------------
The UnixWare 7.1.4 Maintenance Pack 2 set (uw714mp2) contains the
following fixes.
o uw714m2 package fixes:
Feature and usability enhancements:
1. Updated Laptop PC Card support to include CardBus support.
fz529602
2. Updated /sbin/p6update to support new Intel Prescott and Nacona
processors. Includes additional microcode updpates.
fz530177
3. Enhanced /etc/hw command to decode Pentium 4 cache size information
and system memory sizes in excess of 4Gb.
fz525623
fz528909
4. Added lsof command version 4.73.
Lsof is a UNIX-specific tool. Its name stands for LiSt Open Files,
and it does just that. It lists information about files that are
open by the processes running on a UNIX system.
The lsof provided is compiled with the following flags:
-DINKERNEL -Kthread -Kalloca -O2
See the complete copyright notice at the end of this file.
fz530110
5. Increased the number of users from 1 to 2 for the default Business
Edition license.
fz530379
6. Added the Japanese Gaigi character definitions to Japanese locales.
erg712726/fz530392
7. For X11R6 applications, allow the NumLock key to be used with Motif
accelerator and mnemonic keys for pulldown menus. To enable this
feature, set the environment variable "XMNUMLOCK=ALL" for the
process.
erg712703/fz530229
8. For X11R5 applications, allow both the NumLock key and the CapsLock
key to be used with Motif accelerator and mnemonic keys for
pulldown menus. It also allows the keypad to be used for text
widgets along with the NumLock key. To enable this feature, set
the environment variable "XMNUMLOCK=ALL" for the process.
erg712781/fz530229
Security improvements:
9. SECURITY: A new file system tunable, CHROOT_SECURITY is provided
to protect against a known exploit for escaping from a chroot
prison. The new tunable is described in /etc/conf/dtune.d/fs and
defined in /etc/conf/mtune.d/fs. Protection is provided by the
default value of 1 but traditional behavior may be obtained by
resetting CHROOT_SECURITY to 0.
erg712509/fz528555 SCOSA-2005.2
10. SECURITY: ICMP error messages are discarded for TCP connections if
TCP sequence number in ICMP payroll is not in the range of the
data already send but not yet acknowledged.
erg712758/fz530661
11. SECURITY: Fixed the Common Desktop Environment dtlogin XDMCP Parser
Remote Double Free vulnerability.
erg712592/fz529303 SCOSA-2005.18
12. SECURITY: Fixed the following Denial of Service vulnerability.
When the NFS mountd service is run by inetd and an NFS mount related
request is received from a remote (or local) host, inetd will
repeatedly create the mountd process and as a result increasingly
consume memory. This problem also exists for the following inetd
services: ypupdated, rusersd, sprayd, and walld.
To fix this, the mountd service is updated from a "dgram" service to
a "tli" service. The socket_type (in /etc/inet.d/inetd.conf) is
also changed from "dgram" to "tli" for the following inetd
services: mountd, ypupdated, rusersd, sprayd, and walld.
erg712731/fz530479 SCOSA-2005.1
13. SECURITY: An upgrade to the KAME implementation of internet key
exchange (IKE) daemon implementation which includes several
security fixes.
erg712650/fz529836 SCOSA-2005.10
Reliability improvements:
14. Fixed kernel panic caused by Merge trying to save FPU state when
FPU hasn't been used.
fz529860
15. Fixed various bugs in fork that in turn could lead to panics in
priocntl. The fixes had to do with ensuring that per-lwp properties
were inherited consistently across a fork.
fz529463
16. Fixed kernel panic that can sometimes occur due to race condition
between fdetach of a named pipe and the last close on the pipe's
file descriptors.
erg711929/fz519727
17. Fixed kernel panic and kernel memory corruptions caused by an
erroneous pointer left in a STREAMS lower multiplexor queue
structure during execution of an I_LINK or I_PLINK ioctl.
erg712470/fz528449
18. Fixed deadlock that can occur if an NMI occurs on one CPU at the
same time that another CPU takes a clock interrupt and attempts to
recalibrate the clock.
erg712722/fz530382
Networking improvements:
19. Fixed bugs in the scoadmin dhcp and address allocation managers
that cause tcl failures and hangs.
fz526860
fz528398
fz528404
fz528650
fz529146
fz529522
20. For /dev/tcp, /dev/udp and other related device nodes, permission is
given to root to change access and modification times, and to change
mode, uid and gid if they are different from the current ones.
erg712672/fx528399
21. Fixed IP packet filtering.
erg712619/fz529605
22. Fixed race between tcp input processing and tcp close processing.
erg712585/fz529161
23. The netstat -I <interface> <interval> command displays output
incorrectly, if the machine gets a lot of packets in a particular
interval.
erg712663/fz529916
24. System gets many "Out of stream" messages in osmlog and panics
afterwards.
erg712707/fz530251
25. SNMP time ticks are being interpreted as signed 32-bit integers
instead of unsigned 32-bit integers
erg712732/fz530366
26. An errant assumption about the maximum size of tcp/ip header
including the MAC header and the STREAM headers would not exceed 256
bytes caused the system to write past the allocated space. The
allocation optimization now properly accounts for the MAC header if
it does not exceed the 256 byte KMA pool size.
fz530654
27. There was a namespace conflict within the definition of inet_ntoa.
The kernel version is renamed to inet_ntoa_r. This helps to ease
porting of open source applications to UnixWare.
fz529706
28. Changes to ip_var.h to allow porting of open source applications
without requiring the inclusion of some UnixWare-specific headers.
fz529708
29. Moved _tcpconn and tcp_dbg_hdr data structures and associated
defines from tcp.h to tcp_var.h to allow porting of open source
applications without requiring the inclusion of some
UnixWare-specific headers.
fz530909
USB improvements:
30. Certain USB keyboards exhibit a jitter that is usually seen as
the repetition of a previous character.
erg712294/fz527741
31. Fixed a potential problem with newer EHCI USB controllers that are
controlled by the system BIOS. The visible symptom is that devices
attached to the EHCI ports of certain systems won't work.
fz530306
32. Low and full speed USB devices attached directly (i.e. not via a
USB 2.0 hub) to an EHCI controller will get a message logged to the
console 'Device reset timeout during enumeration!' when they are
discovered. The message is benign; the devices work as expected.
This fix eliminates the cause of the distracting message.
fz530377
33. Fixed bug in UDI bridge mapper that caused shared PCI interrupts
to remain un-acknowledged during USB host controller initialization
leading to system hangs.
erg712677/fz530090
erg712699/fz530174
34. Attempting to autoconfigure a USB mouse via the mouseadmin command
did not work properly, and the mouse test would always fail. This
problem would only be encountered by those adding or switching to a
USB mouse, post ISL, and attempting to autoconfigure it through
mouseadmin.
fz530587
Motif library and X improvements::
35. Fixed a bug where the change of background of the Motif Scale
widget with XtSetValues has no effect if the widget was not realized
yet.
erg712682/fz530146
36. Fixed the XmATTACH_OPPOSITE_FORM attachment in the children of a
Form widget using the incorrect sign of the value, which causes the
form to resize itself to become smaller and smaller.
erg712697/fz530166
37. Fixed the display of the Japanese messages in programs based on
the Athena widgets.
Note:
Portions of this fix are contained in the xserver, xclients, and
xcontrib packages. These packages must be installed or the
commands will stop working in Japanese!
erg712661/fz529890
Misc improvements:
38. Changes to acpi and mps drivers to recognize pci devices that
were previously not found. Includes an upgrade to the latest
version of the acpi driver.
fz530205
erg712706/fz530250
39. Online and offline of processors may work incorrectly on systems
where the processors report more than one logical processor per
physical package when hyperthreading is disabled in the system BIOS.
fz530165
40. Fixed problems caused by the Intel ICH3-S chipset occasionally
returning bad real-time clock values. Symptom was that some
platforms may hang on boot with warning messages from
psm_time_spin_adjust.
erg712593/fz529317
41. Various "off by one" errors fixed in the interval timer code.
erg712667/fz529962
42. Disksetup's default blocksize does not work with large VxFS file
systems.
erg712615/fz529483
43. Fixed the reserve bitmap buffer setup to wrong channel/snode during
VxFS snapshot creation, which caused snapshots to be disabled due to
read i/o failures on good drives.
erg712644/fz529774
44. init failing to change runlevels. There was a race condition in the
waitproc function in the init code that has been fixed.
erg712313/fz527890
45. System hangs on boot - idmknodd last process run. There was a race
condition in the waitproc function in the init code that has been
fixed.
erg712607/fz529426
46. Fields incorrectly labeled in rtpm utility in Japanese locale.
fz530091
47. The auditrpt -f <filename> command is causing segmentation faults on
some audit report data files.
erg712760/fz530410
48. The ap command is causing segmentation fault.
Note: Portion of this fix is in the libc package.
erg712675/fz530046
49. The creatiadb command is not working.
erg712678/fz530093
50. The ps command will now report NI values as set by nice(2), rather
than always displaying a 0 in that output column. This is only a
compatibility measure and does not imply that the value set by
nice(2) will affect scheduling behavior.
fz530118
51. Printer manager GUI hangs while adding local printers on a freshly
installed system.
fz530092
52. C++ template instantiation fails when object file has non-.o suffix
To fix this, .ti and .ii suffixes now append to, rather than
replace, non-.o object suffixes.
fz530247
53. A function call argument that is an expression with "side effects",
cannot be used directly more than once when doing function inlining.
A C++ "? :" expression, in which the third operand (conditionally
evaluated) created a short-lived temp class object, was incorrectly
replicated when replacing a multiply-referenced parameter in an
inlined function.
fz530178
54. For NIS systems, correct lookup-by-GID failure.
Note: Portion of this fix is in the libc package.
fz530952
55. We now have libcrypto.so from openssl package also and it defines
_des_crypt() which is also defined by libcrypt.so. Updated
libcrypt.so to use its own definition so that things remain sane.
fz530438
56. Updated the /usr/lib/apache/conf/httpd.conf file if apache-1.3.29 and
php-4.3.5 are installed, or the /opt/apache2/conf/conf.d/php4.conf
file if apache2-2.0.49 and php4-4.3.5 are installed, with:
AddType application/x-httpd-php .php .php3 .inc .phtml
AddType application/x-httpd-php-source .phps
In future, installation of php or php4 should update these files.
fz529730
57. Fixed Tomcat 4.1.30 start script to implement a nohup.
In future, this will be fixed in the tomcat package.
fz530103
58. Fixed the Perl 5.8.3 configuration files to remove build pathnames.
In future, this will be fixed in the perl package.
fz530344
59. Fixed a syntax error in Mozilla start script.
In future, this will be fixed in the mozilla package.
fz530539
o Runtime C Library (libc) version 8.0.2b fixes:
Note:
All fixes in the libc package are also included in the uccs package.
60. Fixed a memory leak in tzset().
erg712729/fz530421
61. The ap command is causing segmentation fault.
erg712675/fz530046
62. PAM enabled services do not update syslog correctly.
fz530185
fz529908
63. For NIS systems, correct lookup-by-GID failure.
fz530952
Additional bug fixes and enhancements are provided with the following
packages that are distributed with UnixWare 7.1.4 Maintenance Pack 2.
o The Common Unix Printing System (cups) package, version 1.1.19-03:
1. SECURITY: Fixed a Denial of Service vulnerability. It was possible
to disable browsing in CUPS by sending an empty UDP datagram to port
631 where cupsd is running.
erg712688/fz530153 SCOSA-2004.15
o The Foomatic Filters and PPDs (foomatic) package, version 3.0.2:
2. SECURITY: Foomatic has been updated from version 3.0.0-02 to 3.0.2
to fix a security problem.
Please see the foomatic website for the list of changes.
http://www.linuxprinting.org/foomatic.html
erg712704/fz530505 SCOSA-2005.12
o The HP Inkjet Printer Driver (hpijs) package, version 1.5-02:
3. Updated and new PPD files for non-HP printers from the
foomatic-3.0.2 distribution.
erg712704/fz530505
o The Lightweight Directory Access Protocol services (ldap) package,
version 8.0.1a:
4. LDAP fails to start with the following error message:
dynamic linker: /usr/lib/ldap/slapd: relocation error symbol not
found: ldapdebug_level referenced from /usr/lib/ldap/slapd
erg712679/fz527615
o The Runtime OpenServer library (libosr) package, version 8.0.2a:
5. Binaries generated under UDK OSR5.0.5 core dump when running
under UnixWare + OKP.
erg712664/fz529933
o The PNG (Portable Network Graphics) Library (libpng) package, version
1.2.7:
6. SECURITY: Libpng has been updated from version 1.2.5 to 1.2.7 to fix
several security problems.
Please see the libpng website for the list of changes.
http://www.libpng.org/pub/png/libpng.html
erg712684/fz530149 SCOSA-2004.16
o The Network Drivers (nd) package, version 8.0.2b:
7. Updated Intel PRO/100 (eeE8) Network Driver to version 2.9.1.
fz530765
8. Updated Intel PRO/1000 (e1008g) Network Driver to version 7.4.9.
fz530764
9. Updated Broadcom Gigabit (bcme) Network Driver to version 7.5.22.
fz530259
10. The following NIC drivers have been updated to include PC Card
support: d21x, e3E and nat.
fz529602
11. The following new adapters are now supported including CardBus NICs
and selected PRISM II Wireless PC Card NICs:
3Com EtherLink III 3C589C 0101058906
3Com EtherLink III 3C589D 0101058906
3Com 10Mbps LAN PC Card 3CCE589EC
3Com 10Mbps LAN PC Card 3CXE589DT
3Com 10Mbps LAN PC Card 3CCE589ET
3Com 10/100 LAN PC Card 3C3FE574BT
Intel PRO/100 CardBus II MBLA3300
Intel PRO/100 S Mobile Adapter MBLA3300 C3
Intel PRO/100 CardBus II MBLA3400
Linksys Combo PCMCIA EthernetCard EC2T
Linksys EtherFast 10/100 PC Card PCMPC100
Linksys EtherFast 10/100 CardBus Card PCMPC200
Linksys Wireless-B Notebook Adapter (802.11b)
Netgear 10/100 PCMCIA FA410
Netgear 10/100 PCMCIA Mobile Adapter FA411
Netgear 10/100 CardBus FA510
Netgear 802.11b Wireless PC Card MA401
Socket Communications EA
Socket Communications LP-E
o The Network Infrastructure and Configuration Subsystem (nics) package,
version 8.0.2b:
12. System panics under heavy load in dlpi_hwfail_handler. There was
race condition in txmon handler.
erg712681/fz530124
o The Open Secure Shell (openssh) package, version 3.9p1-01:
13. OpenSSH has been updated from version 3.8.1p1 to 3.9p1.
Please see the openssh website for the list of changes.
http://www.openssh.com
14. When sshd is stopped and restarted, it no longer works.
The user trying to get in gets the following message:
Read from socket failed: Resource temporarily unavailable
fz529865
15. Host based authentication does not work with openssh.
fz530102
16. Cannot login to an account with an expired password with openssh.
fz530287
o The Samba (samba) package, version 3.0.10:
17. SECURITY: Samba has been updated from version 3.0.4 to 3.0.10 to fix
several security problems.
Please see the samba website for the list of changes.
http://www.samba.org/samba
erg712735/fz530486 SCOSA-2004.15
erg712754/fz530644
o The Squid Caching Proxy Server (squid) package, version 2.5.STABLE7:
18. SECURITY: Squid has been updated from version 2.4.STABLE7 to
2.5.STABLE7 to fix several security problems.
Please see the squid website for the list of changes.
http://www.squid-cache.org
erg712610/fz529457 SCOSA-2005.16
erg712740/fz530514
o The OUDK Optimizing C Compilation System (uccs) package, version 8.0.2b:
19. SECURITY: Fixed a security problem in the cscope command that allows
a local user to compromise filesystem.
erg712738/fz530500
20. When doing optimization on functions with exceptionally large
code blocks where the total number of arguments passed to calls in
a single block exceeds 8000, the C or C++ compiler may generate
incorrect memory addresses for local variables. This problem has
only occurred in atypical 4GL generated source code.
erg712757/fz530656
21. Invalid #define of setterm() macro in curses.h.
fz530412
22. When alloca() is used as an argument to another function call, the
stack of the current frame may be corrupted such that invalid
(saved) register values may be returned to the callee.
fz527215
fz531008
o The General Purpose Data Compression Library (zlib) package,
version 1.2.1-01:
23. SECURITY: Fixed a Denial of Service vulnerability. Fixed error
handling in the inflate implementation to avoid incorrectly
continuing to process in error state.
erg712692/fz530158 SCOSA-2004.17
o The X11R6 Base X Runtime System (basex) package, version 8.0.2a:
24. SECURITY: Fail-soft mechanism is implemented for handling cases
where the permissions and/or owner of the /tmp/.X11-unix,
/tmp/.ICE-unix, and /tmp/.font-unix directories are not correctly
set.
Fail-soft means, if the permission and/or owner is improperly set,
the component would try to properly set it. If it is unable to do
that, it would generate error/warning message(s), but the component
would not fail.
Note: Portions of this fix are contained in the xserver package.
erg712694/fz530161 SCOSA-2005.8
25. Fixed XtAppAddInput() function.
Added missing brackets around XPOLL_READ, XPOLL_WRITE, XPOLL_EXCEPT
erg712671/fz529974
o The X11R6 X Server (xserver) package, version 8.0.2b:
26. Invoking "scoadmin video" on an Intel SE7520JR2 white box server to
adjust graphics resolution in either character or graphics mode
causes the system console to start blinking, and there is no
recovery other than rebooting.
erg712755/fz530648
o The X11R6 Contributed X Clients (xcontrib) package, version 8.0.2a:
27. Fixed warning message from the xtetris command.
fz530182
28. The puzzle command is causing segmentation fault.
erg712700/fz530183
29. The ar command displays incorrect message in Japanese environment.
erg712640/fz529737
o The X11R6 Graphics Drivers (xdrivers) package, version 8.0.2a:
30. Added the Matrox G550 Video Adapter support to the mtx driver.
fz530771
o The IP Filter (ipf) package, version 4.1.3:
31. IP Filter 4.1.3 is an advanced open source filtering package which
provides both firewall and network address translation services. It
is the most common filtering package supported across different
flavors of UNIX. For a complete list of features and services
provided, please check the following URLs.
o http://coombs.anu.edu.au/~avalon
o http://www.obfuscation.org/ipf/ipf-howto.txt
fz530132
------------------------------------------------------------------------
VI. List of Known Issues.
1. After installing the updated nd package, you may see the following
warning message on every boot:
WARNING: eeE8: eeE8ValidateChecksum: EEPROM checksum validation failed
(slot5,port1)
This warning comes from the eeE8 driver version 2.9.1 for the following
NIC:
Vendor ID 0x8086 (INTEL)
Device ID 0x1229
Subsystem Vendor ID 0x8086
Subsystem ID 0x9
This message can be safely ignored.
2. Due to changes in the PC Card subsystem, if you have a NIC configured
in your laptop prior to installing this maintenance pack, you must run
the Network Configuration Manager (netcfg) to remove and then add the
NIC to allow it to function again.
3. Before you can configure a PC Card NIC in your laptop, the pcic driver
must be configured using the following steps:
- Power down the laptop.
- Insert your PC Card NIC into a slot.
For Toshiba laptops, make sure the BIOS has:
Controller Mode = Cardbus/16-bit.
- Power on the system.
- Log in as root
- Run the Device Configuration Utility: 'dcu'.
- Select 'Software Device Drivers'.
- Select 'Miscellaneous'.
- Page down to the 'pcic' driver.
If the pcic driver is already marked by an '*', then the driver is
already configured. Exit the dcu without saving your changes.
- Otherwise, select the 'pcic' driver using the space bar.
- Press F5 (New).
- Set the following values:
Unit: 0
IPL: 0
ITYPE: 0
IRQ: 0
IOStart: 0
IOEnd: 0
MemStart: This field is automatically set by the pcic driver.
Don't change this setting.
MemEnd: This field is automatically set by the pcic driver.
Don't change this setting.
DMA: -1
BindCPU: Leave this field blank.
- Press F10 (Apply and Return).
- Press Enter (Return).
- Select 'Return to DCU Main Menu'.
- Select 'Apply Changes and Exit DCU'.
- At the root prompt type:
rm /etc/conf/pack.d/pcic/_drv.o
/etc/conf/bin/idbuild -B
init 6
- When the system is booting up, verify a PC Card is detected
following the copyright screen. For example,
EG: Intel Pro/100 Cardbus PC Card detected in socket 0
- Run the Network Configuration Manager 'netcfg' to configure your NIC.
- init 6
------------------------------------------------------------------------
VII. File Contents
List of files installed/updated by the uw714m2 package:
/etc/conf/drvmap.d/pcic
/etc/conf/drvmap.d/udi
/etc/conf/drvmap.d/udiMbrdg
/etc/conf/drvmap.d/udiMkb
/etc/conf/drvmap.d/usb_ehci
/etc/conf/drvmap.d/usbd
/etc/conf/dtune.d/fs
/etc/conf/interface.d/hpci.1.2
/etc/conf/interface.d/mki.3
/etc/conf/interface.d/psm.2.2
/etc/conf/mdevice.d/pcic
/etc/conf/mdevice.d/psm_apic
/etc/conf/mdevice.d/psm_mc146818
/etc/conf/mdevice.d/udi
/etc/conf/mdevice.d/udiMbrdg
/etc/conf/mdevice.d/udiMkb
/etc/conf/mdevice.d/usb_ehci
/etc/conf/mdevice.d/usbd
/etc/conf/mtune.d/fs
/etc/conf/pack.d/acpi/Driver_atup.o
/etc/conf/pack.d/acpi/Driver_mp.o
/etc/conf/pack.d/confmgr/Driver_atup.o
/etc/conf/pack.d/confmgr/Driver_mp.o
/etc/conf/pack.d/fc/Driver_atup.o
/etc/conf/pack.d/fc/Driver_mp.o
/etc/conf/pack.d/fp/Driver_atup.o
/etc/conf/pack.d/fp/Driver_mp.o
/etc/conf/pack.d/fs/Driver_atup.o
/etc/conf/pack.d/fs/Driver_mp.o
/etc/conf/pack.d/fs/space.c
/etc/conf/pack.d/hpci/Driver_atup.o
/etc/conf/pack.d/hpci/Driver_mp.o
/etc/conf/pack.d/inet/Driver_atup.o
/etc/conf/pack.d/inet/Driver_mp.o
/etc/conf/pack.d/inet/space.c
/etc/conf/pack.d/io/Driver_atup.o
/etc/conf/pack.d/io/Driver_mp.o
/etc/conf/pack.d/kma/Driver_atup.o
/etc/conf/pack.d/kma/Driver_mp.o
/etc/conf/pack.d/kma/space.c
/etc/conf/pack.d/mem/Driver_atup.o
/etc/conf/pack.d/mem/Driver_mp.o
/etc/conf/pack.d/mps/Driver_mp.o
/etc/conf/pack.d/namefs/Driver_atup.o
/etc/conf/pack.d/namefs/Driver_mp.o
/etc/conf/pack.d/nb/Driver_atup.o
/etc/conf/pack.d/nb/Driver_mp.o
/etc/conf/pack.d/nbclts/Driver_atup.o
/etc/conf/pack.d/nbclts/Driver_mp.o
/etc/conf/pack.d/nbcots/Driver_atup.o
/etc/conf/pack.d/nbcots/Driver_mp.o
/etc/conf/pack.d/net/Driver_atup.o
/etc/conf/pack.d/net/Driver_mp.o
/etc/conf/pack.d/pccard/Driver_atup.o
/etc/conf/pack.d/pccard/Driver_mp.o
/etc/conf/pack.d/pccard/stubs.c
/etc/conf/pack.d/pci/Driver_atup.o
/etc/conf/pack.d/pci/Driver_mp.o
/etc/conf/pack.d/pcic/Driver.o
/etc/conf/pack.d/pcic/space.c
/etc/conf/pack.d/pcic/stubs.c
/etc/conf/pack.d/proc/Driver_atup.o
/etc/conf/pack.d/proc/Driver_mp.o
/etc/conf/pack.d/procfs/Driver_atup.o
/etc/conf/pack.d/procfs/Driver_mp.o
/etc/conf/pack.d/psm_apic/Driver_mp.o
/etc/conf/pack.d/psm_mc146818/Driver.o
/etc/conf/pack.d/ptem/Driver_atup.o
/etc/conf/pack.d/ptem/Driver_mp.o
/etc/conf/pack.d/resmgr/Driver_atup.o
/etc/conf/pack.d/resmgr/Driver_mp.o
/etc/conf/pack.d/sockfs/Driver_atup.o
/etc/conf/pack.d/sockfs/Driver_mp.o
/etc/conf/pack.d/svc/Driver_atup.o
/etc/conf/pack.d/svc/Driver_mp.o
/etc/conf/pack.d/sysclass/Driver_atup.o
/etc/conf/pack.d/sysclass/Driver_mp.o
/etc/conf/pack.d/ticlts/Driver_atup.o
/etc/conf/pack.d/ticlts/Driver_mp.o
/etc/conf/pack.d/ts/Driver_atup.o
/etc/conf/pack.d/ts/Driver_mp.o
/etc/conf/pack.d/udi/Driver.o
/etc/conf/pack.d/udiMbrdg/Driver.o
/etc/conf/pack.d/udiMkb/Driver.o
/etc/conf/pack.d/usb_ehci/Driver.o
/etc/conf/pack.d/usbd/Driver.o
/etc/conf/pack.d/util/Driver_atup.o
/etc/conf/pack.d/util/Driver_mp.o
/etc/conf/pack.d/vxfs/Driver_atup.o
/etc/conf/pack.d/vxfs/Driver_mp.o
/etc/conf/sdevice.d/pcic
/etc/conf/sdevice.d/udi
/etc/conf/sdevice.d/udiMbrdg
/etc/conf/sdevice.d/udiMkb
/etc/conf/sdevice.d/usb_ehci
/etc/conf/sdevice.d/usbd
/etc/crash
/etc/dcopy
/etc/dinit.d/S80lp
/etc/docview
/etc/eels/src/eelsdba/Makefile-scox
/etc/eels/src/eelsdba/README
/etc/eels/src/eelsdba/eelsdba_mysql_scox.c
/etc/eels/src/eelsdba/initdb.mysql-scox
/etc/ff
/etc/fsck
/etc/hw
/etc/imapd
/etc/inet/inetd.conf
/etc/init.d/eelsrc
/etc/init.d/license
/etc/init.d/lp
/etc/init.d/snmp
/etc/init.d/z35SysInfo
/etc/mail/slocal
/etc/mkfs
/etc/mount
/etc/ncheck
/etc/p6updata
/etc/pam.d/dtlogin
/etc/pam.d/dtsession
/etc/pam.d/ftp
/etc/pam.d/login
/etc/pam.d/mail
/etc/pam.d/passwd
/etc/pam.d/rexec
/etc/pam.d/rlogin
/etc/pam.d/rsh
/etc/pam.d/su
/etc/pam.d/telnet
/etc/pf.d/IP/.saps
/etc/popper
/etc/rc0.d/K20lp
/etc/rc0.d/K70eels
/etc/rc1.d/K20lp
/etc/rc1.d/K67snmp
/etc/rc1.d/R10license
/etc/rc1.d/S70eels
/etc/rc2.d/S70eels
/etc/rc2.d/S73snmp
/etc/rc2.d/S95docview
/etc/scsi/pdi_hot
/etc/scsi/pdimkdev
/etc/scsi/pdimkdtab
/etc/scsi/sdighost
/etc/scsi/sdipath
/etc/security/audit/auditrpt/auditrptv4
/etc/volcopy
/sbin/devnm
/sbin/df
/sbin/fsck
/sbin/fsdb
/sbin/init
/sbin/mkfs
/sbin/mount
/sbin/p6update
/sbin/putdev
/sbin/sdimkdev
/sbin/sdipath
/sbin/su
/usr/X/lib/WXm/libXm.so.1.3
/usr/X/lib/X11/locale/ja/app-defaults/Bitmap
/usr/X/lib/X11/locale/ja/app-defaults/Chooser
/usr/X/lib/X11/locale/ja/app-defaults/Editres
/usr/X/lib/X11/locale/ja/app-defaults/Spider
/usr/X/lib/X11/locale/ja/app-defaults/Viewres
/usr/X/lib/X11/locale/ja/app-defaults/XClipboard
/usr/X/lib/X11/locale/ja/app-defaults/XFontSel
/usr/X/lib/X11/locale/ja/app-defaults/XLock
/usr/X/lib/X11/locale/ja/app-defaults/Xedit
/usr/X/lib/X11/locale/ja/app-defaults/Xfd
/usr/X/lib/X11/locale/ja/app-defaults/Xman
/usr/X/lib/dtruntime.so.1
/usr/X/lib/libXm.a
/usr/X/lib/libXm.so.1.3
/usr/bin/compress
/usr/bin/ddbconv
/usr/bin/devattr
/usr/bin/devfree
/usr/bin/devreserv
/usr/bin/df
/usr/bin/getdev
/usr/bin/getdgrp
/usr/bin/getvol
/usr/bin/login
/usr/bin/lsof
/usr/bin/mailcheck
/usr/bin/mailx
/usr/bin/mouseadmin
/usr/bin/netstat
/usr/bin/passwd
/usr/bin/pkginfo
/usr/bin/pkglist
/usr/bin/pkgmk
/usr/bin/pkgparam
/usr/bin/pkgtrans
/usr/bin/putdev
/usr/bin/su
/usr/bin/uncompress
/usr/bin/zcat
/usr/ccs/bin/CC
/usr/ccs/lib/c++be
/usr/ccs/lib/prelink
/usr/dt/bin/dtfile
/usr/dt/bin/dtgreet
/usr/dt/bin/dtlogin
/usr/dt/bin/dtsession
/usr/dt/lib/libDtLogin.so
/usr/dt/lib/libDtLogin.so.1
/usr/dt/lib/libpam.so.1
/usr/include/net/radix.h
/usr/include/netinet/in.h
/usr/include/netinet/in_mp.h
/usr/include/netinet/in_pcb.h
/usr/include/netinet/ip_var.h
/usr/include/netinet/tcp.h
/usr/include/netinet/tcp_var.h
/usr/include/netmgt/snmp.h
/usr/include/sys/class.h
/usr/include/sys/disp.h
/usr/include/sys/insrem.h
/usr/include/sys/kmem.h
/usr/include/sys/lcis.h
/usr/include/sys/lclient.h
/usr/include/sys/lcs.h
/usr/include/sys/lss.h
/usr/include/sys/lwp.h
/usr/include/sys/queue.h
/usr/include/sys/socket.h
/usr/include/sys/stream.h
/usr/include/sys/strsubr.h
/usr/include/sys/vfs.h
/usr/lib/.ns.so
/usr/lib/crash/libkcrash.so
/usr/lib/crash/macros/buf.k
/usr/lib/crash/macros/e1008g.k
/usr/lib/crash/macros/eeE8.k
/usr/lib/crash/macros/file.k
/usr/lib/crash/macros/info.k
/usr/lib/crash/macros/inode.k
/usr/lib/crash/macros/ipc.k
/usr/lib/crash/macros/loadmacs
/usr/lib/crash/macros/net.k
/usr/lib/crash/macros/page.k
/usr/lib/crash/macros/pm.k
/usr/lib/crash/macros/proc.k
/usr/lib/crash/macros/sertty.k
/usr/lib/crash/macros/stack.k
/usr/lib/crash/macros/stat.k
/usr/lib/crash/macros/stream.k
/usr/lib/crash/macros/trace.k
/usr/lib/crash/macros/ufs.k
/usr/lib/crash/macros/vm.k
/usr/lib/crash/macros/vnode.k
/usr/lib/crash/macros/vxfs.k
/usr/lib/iaf/in.login/scheme
/usr/lib/iaf/login/scheme
/usr/lib/libXm.so.1.3
/usr/lib/libadm.a
/usr/lib/libcrypt.so
/usr/lib/libcrypt.so.1
/usr/lib/libnsl.so
/usr/lib/libnsl.so.1
/usr/lib/libsmux.so
/usr/lib/libsnmp.so
/usr/lib/libsnmpio.so
/usr/lib/libxti.so
/usr/lib/locale/ja/LC_CTYPE
/usr/lib/locale/ja/LC_MESSAGES/RTPM
/usr/lib/locale/ja/LC_MESSAGES/uxar
/usr/lib/nfs/mountd
/usr/lib/scoadmin/aas/aasGUI
/usr/lib/scoadmin/dhcp/dhcpGUI
/usr/lib/scoadmin/filesystem/filesystemOsa
/usr/lib/scoadmin/netosa/aasOsa
/usr/lib/scoadmin/printer/printerGUI
/usr/sadm/install/bin/pkginstall
/usr/sadm/install/bin/pkgremove
/usr/sadm/sysadm/bin/mkdtab
/usr/sbin/ap
/usr/sbin/crash
/usr/sbin/creatiadb
/usr/sbin/cs
/usr/sbin/dcopy
/usr/sbin/df
/usr/sbin/disksetup
/usr/sbin/edquota
/usr/sbin/fdisk
/usr/sbin/ff
/usr/sbin/fsck
/usr/sbin/hostmibd
/usr/sbin/in.ftpd
/usr/sbin/in.inetinst
/usr/sbin/in.rexecd
/usr/sbin/in.rshd
/usr/sbin/in.snmpd
/usr/sbin/installf
/usr/sbin/labelit
/usr/sbin/mkfs
/usr/sbin/mount
/usr/sbin/ncheck
/usr/sbin/partsize
/usr/sbin/pkgadd
/usr/sbin/pkgask
/usr/sbin/pkgcat
/usr/sbin/pkgchk
/usr/sbin/pkgcopy
/usr/sbin/pkginstall
/usr/sbin/pkgrm
/usr/sbin/prtconf
/usr/sbin/quot
/usr/sbin/quota
/usr/sbin/quotacheck
/usr/sbin/quotaoff
/usr/sbin/quotaon
/usr/sbin/racoon
/usr/sbin/removef
/usr/sbin/repquota
/usr/sbin/sco_pmd
/usr/sbin/switchout
/usr/sbin/volcopy
/var/spool/mqueue
------------------------------------------------------------------------
VIII. Escalation Fixes in this Maintenance Pack
These are the Escalation tracking numbers for the fixes included in
UnixWare 7.1.4 Maintenance Pack 1. These fixes are also included in
UnixWare 7.1.4 Maintenance Pack 2.
erg711929/fz529721 erg712596/fz529361
erg712598/fz529384 erg712605/fz529414
erg712620/fz529611 erg712621/fz529619
erg712635/fz529721 erg712658/fz529884
erg712661/fz529890 erg712672/fz528399
erg712682/fz530146 erg712697/fz530166
ptf9050a/fz529560
ptf9050b/fz529565
fz198541 fz519105 fz528611 fz528775
fz528862 fz529097 fz529463 fz529581
fz529663 fz529698 fz529765 fz529851
fz529860 fz529876 fz529916
erg712282/fz526486 (fix provided in the nics package)
erg712602/fz529411 (fix provided in the openssl package)
erg712635/fz529721 (fix provided in the uccs package)
erg712648/fz529827 (fix provided in the openssh package
erg712665/fz529930 (fix provided in the uccs package)
erg712700/fz530183 (fix provided in the xcontrib package)
erg712757/fz530656 (fix provided in the uccs package)
fz529615 (fix provided in the foomatic and hpijs packages)
fz529629 (fix provided in the modjk1 package)
fz529665 (fix provided in the samba package)
fz528862 (fix provided in the xserver package)
fz528969 (fix provided in the samba package)
fz530182 (fix provided in the xcontrib package)
These are the Escalation tracking numbers for the fixes included in
UnixWare 7.1.1 Maintenance Pack 2:
erg711929/fz519727 erg712294/fz527741
erg712313/fz527890 erg712470/fz528449
erg712509/fz528555 erg712585/fz529161
erg712592/fz529303 erg712593/fz529317
erg712607/fz529426 erg712615/fz529483
erg712619/fz529605 erg712644/fz529774
erg712650/fz529836 erg712661/fz529890
erg712663/fz529916 erg712667/fz529962
erg712672/fx528399 erg712675/fz530046
erg712677/fz530090 erg712678/fz530093
erg712682/fz530146 erg712697/fz530166
erg712699/fz530174 erg712703/fz530229
erg712706/fz530250 erg712707/fz530251
erg712722/fz530382 erg712726/fz530392
erg712731/fz530479 erg712732/fz530366
erg712758/fz530661 erg712760/fz530410
erg712781/fz530229
erg712729/fz530421 (fix provided in the libc package)
erg712688/fz530153 (fix provided in the cups package)
erg712704/fz530505 (fix provided in the foomatic and hpijs packages)
erg712664/fz529933 (fix provided in the libosr package)
erg712679/fz527615 (fix provided in the ldap package)
erg712684/fz530149 (fix provided in the libpng package)
erg712681/fz530124 (fix provided in the nics package)
erg712735/fz530486 (fix provided in the samba package)
erg712754/fz530644 (fix provided in the samba package)
erg712610/fz529457 (fix provided in the squid package)
erg712740/fz530514 (fix provided in the squid package)
erg712738/fz530500 (fix provided in the uccs package)
erg712757/fz530656 (fix provided in the uccs package)
erg712692/fz530158 (fix provided in the zlib package)
erg712694/fz530161 (fix provided in the basex package)
erg712671/fz529974 (fix provided in the basex package)
erg712755/fz530648 (fix provided in the xserver package)
erg712700/fz530183 (fix provided in the xcontrib package)
erg712640/fz529737 (fix provided in the xcontrib package)
fz525623 fz526860 fz528398 fz528404
fz528650 fz528909 fz529146 fz529463
fz529522 fz529602 fz529706 fz529708
fz529730 fz529860 fz530091 fz530092
fz530103 fz530110 fz530118 fz530165
fz530177 fz530178 fz530247 fz530306
fz530344 fz530377 fz530379 fz530438
fz530539 fz530587 fz530654 fz530909
fz530952
fz529908 (fix provided in the libc package)
fz530185 (fix provided in the libc package)
fz530952 (fix provided in the libc package)
fz529602 (fix provided in the nd package)
fz530259 (fix provided in the nd package)
fz530764 (fix provided in the nd package)
fz530765 (fix provided in the nd package)
fz529865 (fix provided in the openssh package)
fz530102 (fix provided in the openssh package)
fz530287 (fix provided in the openssh package)
fz527215 (fix provided in the uccs package)
fz530412 (fix provided in the uccs package)
fz531008 (fix provided in the uccs package)
fz530182 (fix provided in the xcontrib package)
fz530771 (fix provided in the xdrivers package)
fz530132 (fix provided in the ipf package)
------------------------------------------------------------------------
IX. Copyrights.
1. The lsof command:
/*
* Copyright 2002 Purdue Research Foundation, West Lafayette,
* Indiana 47907. All rights reserved.
*
* Written by Victor A. Abell
*
* This software is not subject to any license of the American
* Telephone and Telegraph Company or the Regents of the
* University of California.
*
* Permission is granted to anyone to use this software for
* any purpose on any computer system, and to alter it and
* redistribute it freely, subject to the following
* restrictions:
*
* 1. Neither the authors nor Purdue University are responsible
* for any consequences of the use of this software.
*
* 2. The origin of this software must not be misrepresented,
* either by explicit claim or by omission. Credit to the
* authors and Purdue University must appear in documentation
* and sources.
*
* 3. Altered versions must be plainly marked as such, and must
* not be misrepresented as being the original software.
*
* 4. This notice may not be removed or altered.
*/
------------------------------------------------------------------------
(c) Copyright 2005 The SCO Group, Inc. All rights reserved.